歐洲建築黏合劑和密封劑：市場佔有率分析、行業趨勢和統計數據以及成長預測（2026-2031 年）

據 Mordor Intelligence 稱，2025 年歐洲建築黏合劑和密封劑市場價值為 50.8 億美元，預計到 2031 年將從 2026 年的 54.1 億美元成長至 73.6 億美元，預測期（2026-2031 年）的複合年成長率為 6.36%。

本報告按樹脂類型（丙烯酸樹脂、氰基丙烯酸酯樹脂、環氧樹脂等）、工藝（水性、溶劑型等）、應用領域（地板材料/瓷磚、屋頂材料等）、最終用途（住宅、商業等）和地區（法國、德國、義大利、俄羅斯、西班牙、英國等）進行細分。市場預測以美元計價。

歐洲建築黏合劑和密封劑市場的趨勢和洞察

快速過渡到低VOC和符合REACH標準的配方

修訂後的CLP法規將於2024年12月10日生效，並於2026年7月1日起實施。該法規將新增危險分類和數位標籤規則，並縮短D4、D5和D6矽氧烷的重組週期。 MAPEI的無溶劑矽烷化聚合物「ULTRABOND ECO S955 1K」已符合EMICODE EC1 Plus標準，28天後TVOC含量低於60 µg/m³，證明其已做好進入低VOC地板應用市場的準備。修訂後的建築產品法規（CPR）將於2026年1月8日生效，該法規將把數位產品護照（DPP）和貫穿整個生命週期的碳計量納入CE標誌認證，並將優先考慮在公開競標截止日期前完成第三方檢驗的先驅。丹麥於 2025 年引入了 7.1 kg CO2e/m2/年的排放限制（計劃於 2029 年收緊至 5.8 kg），其他國家關於產品固有碳排放的法規正在向德國和荷蘭蔓延，加速了從溶劑型密封劑轉向其他密封劑的進程。

疫情後的歐盟翻新浪潮（翻新浪潮舉措）

歐盟的目標是到2030年提高3,500萬棟建築的能源效率，並計劃在2029年投入660億歐元公共資金。建築能源性能指令（EPBD）的修訂將強制要求從2028年起對面積超過1000平方米的新建建築進行全生命週期碳排放評估，並從2030年起對所有新建建築進行評估。德國的氣候與轉型基金已撥款125億歐元（145.9億美元）用於鐵路基礎建設，並將住宅維修作為優先事項。預計這將扭轉建築產出的下滑趨勢，使德國的建築產出從2024年萎縮4.9%轉為2026年成長2.5%，成為該地區復甦最快的國家。在法國和西班牙，由於承包商網路分散，相關工作的推進速度較慢，但由於資金籌措管道的改善，季度維修量正在上升。然而，只有25%的建築工人掌握至少一項綠色技能，勞動力仍是限制因素。因此，產品開發人員正專注於開發能夠減少承包商培訓時間、具有高度容錯性且無需表面處理的產品。

異氰酸酯和矽酮原料價格波動

瓦克化學宣布自2026年2月1日起再次提價25%。同時，用於生產矽酮的碳酸二甲酯（DMC）和乙烯-醋酸乙烯酯共聚物（EVA）的價格指數分別上漲了28%和22%。由於交貨週期已從2024年的4-6週延長至8-12週，加工商正爭分奪秒地趕工，導致庫存過剩，營運資金緊張。由於需求疲軟和能源成本高企，異氰酸酯工廠在2025年的平均運轉率75-80%，而2026年的穩定取決於中國限制出口。歐洲的電價依然居高不下，是美國墨西哥灣沿岸基準電價的兩到三倍，這削弱了歐洲的競爭力，迫使複合材料生產商轉向長期供應合約。

細分市場分析

到2025年，丙烯酸樹脂在歐洲建築黏合劑和密封劑市場仍佔26.75%的佔有率。這主要得益於地板材料和瓷磚應用，在這些應用中，較長的固化時間和易於用水清潔的特性彌補了其黏合強度較低的不足。矽酮樹脂到2031年的複合年成長率（CAGR）為6.28%，主要歸因於強制要求在含碳量受限的項目中使用結構玻璃，以及從2026年中期開始逐步淘汰D4-D6矽氧烷。聚氨酯仍然是橋樑接縫位移公差超過±25%以及暴露於紫外線下的屋頂防水卷材的重要材料。環氧樹脂在工業地板材料市場佔據主導地位，但由於其固化週期長且揮發性有機化合物（VOC）含量不符合EMICODE EC1 Plus標準，其市場成長動能正在減弱。像BASF的 SUSBOARD 所支持的生物基聚氨酯和正在 3D 列印混凝土中進行實驗性應用的鹼激活混合物等小眾領域，在 2031 年仍將在歐洲建築黏合劑和密封劑市場佔據極低的佔有率。那些早期致力於重新配製矽酮產品的公司已經獲得了幕牆工程師的規範批准，這些工程師要求提供碳中和的 EPD（環境產品聲明）。

儘管揮發性有機化合物（VOC）含量有所降低，但由於丙烯酸產品的現有裝機量，其市場佔有率的下降趨勢仍然緩慢。矽酮供應商正透過改質劑回收和長期供應合約來規避對鉑金依賴的風險。聚氨酯領域的創新者正利用免底漆技術縮短人手不足地區的安裝時間，並促進模組化工廠的應用。環氧樹脂供應商正將高固態含量、快速固化的環氧樹脂重新定位為重型物流地板材料的首選產品，而氰基丙烯酸酯產品在修補套件領域仍保持強勁的需求。

2025年，密封膠佔總銷售額的42.37%，產品種類繁多，從用於外牆豎框的單組分混合型密封膠到用於跑道接縫的雙組分聚硫化物密封黏合劑，應有盡有。受歐盟2025年第四季度實施的VOC排放上限規定以及EMICODE EC1 Plus標籤的推出（該標籤將TVOC含量在28天后限制在60µg/m³以內）的推動，水性粘合劑預計在預測期（2026-2031年）內將以6.57%的複合年成長率成長。溶劑型黏合劑在寒冷氣候建築中仍然發揮著重要作用，因為快速固化的優勢超過了排放帶來的負面影響，儘管高成本的醋酸和乙二醇基黏合劑的利潤率正在下降。反應型雙組分體系用於結構樓板和橋樑，這些應用需要2 MPa或更高的黏合強度和25年的使用壽命，但由於原料市場波動，其價格波動性正在增加。

熱熔膠廣泛應用於預製生產線，固化時間僅需60秒，與組裝的生產週期相當。然而，在溫度超過80 度C的外牆環境中，熱熔膠的應用面臨挑戰。 2026年DPP（產品開發計畫）的實施將有利於低碳含量的水性產品，預計到2031年，其在歐洲建築黏合劑和密封劑市場的佔有率將有所成長。為了確保產品在歐洲的保存期限，生產商正在相互授權使用保濕劑和抗凍融穩定劑。

其他好處：

• Excel格式的市場預測（ME）表
• 3個月的分析師支持

目錄

第1章：引言

• 研究假設和市場定義
• 調查範圍

第2章：調查方法

第3章執行摘要

第4章 市場狀況

• 市場概覽
• 市場促進因素
  • 快速過渡到低VOC和符合REACH標準的配方
  • 疫情後歐盟的維修熱潮（「翻新浪潮計劃」）
  • 異地建造與模組化建造的發展
  • 高效能幕牆系統的需求日益成長
  • 強制性碳排放減少措施正在加速結構玻璃的採用。
  • 3D列印混凝土對黏合劑和密封劑的需求
• 市場限制因素
  • 異氰酸酯和矽酮原料價格波動
  • 俄烏戰爭造成的物流中斷
  • 缺乏先進應用技術技能
  • 歐盟正在延長化學物質（CLP/GHS）的核准程序。
• 價值鏈分析
• 監理情勢
• 技術展望
• 波特五力模型

第5章 市場規模與成長預測

• 依樹脂類型
  • 丙烯酸纖維
  • 氰基丙烯酸酯
  • 環氧樹脂
  • 聚氨酯
  • 矽酮
  • VAE／EVA
  • 其他
• 透過技術
  • 水溶液
  • 溶劑型
  • 反應性
  • 熱熔膠
  • 密封膠（單組分和雙組分）
• 透過使用
  • 地板材料和瓷磚
  • 屋頂材料
  • 牆板和外觀
  • 隔熱防潮
  • 基礎設施連接（橋樑和隧道）
• 按最終用途
  • 住宅
  • 商業
  • 產業
  • 基礎設施
• 國家
  • 法國
  • 德國
  • 義大利
  • 俄羅斯
  • 西班牙
  • 英國
  • 其他歐洲國家

第6章 競爭情勢

• 市場集中度
• 策略趨勢
• 市佔率（%）和排名分析
• 公司簡介
  • 3M
  • Arkema
  • BASF
  • Dow
  • fischer Group of Companies
  • HB Fuller Company
  • Henkel AG & Co. KGaA
  • Hexion Inc.
  • Huntsman Corporation
  • ITW Performance Polymers
  • MAPEI SpA
  • Momentive
  • PPG Industries Inc.
  • RPM International Inc.
  • Selena Group
  • Sika AG
  • Soudal Group
  • Wacker Chemie AG

第7章 市場機會與未來展望

According to Mordor Intelligence, the europe construction adhesives and sealants market size was valued at USD 5.08 billion in 2025 and is estimated to grow from USD 5.41 billion in 2026 to reach USD 7.36 billion by 2031, at a CAGR of 6.36% during the forecast period (2026-2031).

This report is Segmented by Resin Type (Acrylic, Cyanoacrylate, Epoxy, and More), Technology (Water-Borne, Solvent-Borne, and More), Application (Flooring and Tiling, Roofing, and More), End-Use Sector (Residential, Commercial, and More), and Geography (France, Germany, Italy, Russia, Spain, United Kingdom, and More). The Market Forecasts are Provided in Terms of Value (USD).

Europe Construction Adhesives And Sealants Market Trends and Insights

Rapid Shift to Low-VOC, REACH-Compliant Formulations

The revised CLP entered force on 10 December 2024 and applies from 1 July 2026, adding new hazard classes and digital label rules that compress reformulation windows for D4, D5, and D6 siloxanes. MAPEI's solvent-free silylated polymer, ULTRABOND ECO S955 1K, already meets EMICODE EC1 Plus with TVOC below 60 µg/m3 after 28 days, demonstrating market readiness for low-VOC flooring jobs. The Construction Products Regulation (CPR) revision, effective 8 January 2026, embeds the Digital Product Passport (DPP) and whole-life carbon accounting into CE marking, rewarding early movers who complete third-party verification ahead of public-tender deadlines. National embodied-carbon caps, such as Denmark's 7.1 kg CO2e/m2/year in 2025, tightening to 5.8 kg in 2029, are spreading to Germany and the Netherlands, accelerating the displacement of solvent-borne sealants.

Post-Pandemic EU Renovation Wave (Renovation Wave Initiative)

The European Union (EU) targets energy upgrades for 35 million buildings by 2030, channeling EUR 66 billion in public funding through 2029. The Energy Performance of Buildings Directive (EPBD) recast requires whole-life carbon assessments for new buildings above 1,000 m2 from 2028 and for all new construction from 2030. Germany's Climate & Transformation Fund allocates EUR 12.5 billion (USD 14.59 billion) to rail infrastructure and prioritizes residential retrofits, pushing construction output from a 4.9% contraction in 2024 to 2.5% growth in 2026, the region's fastest rebound. Uptake in France and Spain trails due to fragmented contractor networks, yet improved financing tools are lifting quarter-on-quarter retrofit volumes. Labor remains the choke point because only 25% of construction workers hold at least one green skill, prompting formulators to emphasize error-tolerant, primer-less products that reduce installer training time.

Volatility in Isocyanate and Silicone Feedstock Prices

Wacker Chemie flagged an additional 25% price rise effective 1 February 2026, while silicone DMC (Dimethyl Carbonate) and EVA (Ethylene-Vinyl Acetate) indices rose 28% and 22%, respectively. Converters scramble for eight-to-twelve-week delivery slots versus four-to-six in 2024, carrying extra inventory that absorbs working capital. Isocyanate plants averaged 75-80% utilization through 2025 on weak demand and high energy costs, leaving 2026 stabilization dependent on curtailing Chinese exports. Persistently higher European electricity prices, two to three times U.S. Gulf Coast benchmarks, erode competitiveness and push formulators toward long-term supply contracts.

Other drivers and restraints analyzed in the detailed report include:

1. Growth of Off-Site and Modular Construction
2. Rising Demand for High-Performance Facade Systems
3. Russia-Ukraine War Driven Logistics Disruptions

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Acrylic resins maintained 26.75% Europe Construction Adhesives and Sealants market share in 2025, led by flooring and tiling, where open time and water cleanup offset lower bond strength. Silicone's 6.28% CAGR through 2031 stems from mandatory structural glazing in embodied-carbon-capped projects and the phase-out of D4-D6 siloxanes from mid-2026. Polyurethanes remain indispensable for bridge-joint movement capability above +-25% and UV-exposed roofing membranes. Epoxies govern industrial flooring but lose momentum because of long cure cycles and VOC (Volatile Organic Compound) levels incompatible with EMICODE EC1 Plus. Niche streams such as bio-based polyurethanes, backed by BASF's SUSBOARD, and alkali-activated blends trialed in 3D-printed concrete, remain under a very low share of Europe Construction Adhesives and Sealants market size through 2031. Early silicon reformulators gain specification lock-in with facade engineers seeking carbon-neutral EPDs.

Acrylic's installed volume base ensures slow erosion even as water-borne modifiers prune VOC content. Silicone suppliers hedge platinum exposure through recycling catalysts and long-term supply deals. Polyurethane innovators exploit primer-less tech to cut installer hours in labor-scarce regions, boosting uptake in modular factories. Epoxy vendors re-position high-solids, fast-cure grades for extreme-wear logistics floors, while cyanoacrylates persevere in repair kits.

Sealants covered 42.37% of 2025 revenue, ranging from 1K hybrids for facade mullions to 2K polysulfides for runway joints. Water-borne adhesives are expected to expand at a 6.57% CAGR during the forecast period (2026-2031), propelled by Q4 2025 EU VOC ceilings and EMICODE EC1 Plus labeling that caps TVOC at 60 µg/m3 after 28 days. Solvent-borne grades stay relevant in cold-weather jobs where rapid set outweighs emissions penalties, though margins narrow on costlier acetates and glycols. Reactive 2K systems address structural floors and bridges requiring greater than 2 MPa adhesion and 25-year durability, but feedstock turbulence adds price volatility.

Hot-melts thrive in prefab lines, delivering 60-second set times that mirror assembly-line takt yet struggle above 80°C facade service. CPR's 2026 DPP trigger rewards water-borne products with lower embodied carbon, lifting their Europe Construction Adhesives and Sealants market size share by 2031. Formulators cross-license humectants and freeze-thaw stabilizers to ensure pan-European shelf life.

List of Companies Covered in this Report:

1. 3M
2. Arkema
3. BASF
4. Dow
5. fischer Group of Companies
6. H.B. Fuller Company
7. Henkel AG & Co. KGaA
8. Hexion Inc.
9. Huntsman Corporation
10. ITW Performance Polymers
11. MAPEI S.p.A.
12. Momentive
13. PPG Industries Inc.
14. RPM International Inc.
15. Selena Group
16. Sika AG
17. Soudal Group
18. Wacker Chemie AG

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 Introduction

• 1.1 Study Assumptions and Market Definition
• 1.2 Scope of the Study

2 Research Methodology

3 Executive Summary

4 Market Landscape

• 4.1 Market Overview
• 4.2 Market Drivers
  • 4.2.1 Rapid shift to low-VOC, REACH-compliant formulations
  • 4.2.2 Post-pandemic EU renovation wave (Renovation Wave Initiative)
  • 4.2.3 Growth of off-site and modular construction
  • 4.2.4 Rising demand for high-performance facade systems
  • 4.2.5 Carbon-reduction mandates accelerating structural glazing
  • 4.2.6 3D-printed concrete's adhesive and sealant demand
• 4.3 Market Restraints
  • 4.3.1 Volatility in isocyanate and silicone feedstock prices
  • 4.3.2 Russia-Ukraine war driven logistics disruptions
  • 4.3.3 Skill shortages in advanced application techniques
  • 4.3.4 Lengthy EU chemical approval timelines (CLP/GHS)
• 4.4 Value Chain Analysis
• 4.5 Regulatory Landscape
• 4.6 Technological Outlook
• 4.7 Porter's Five Forces
  • 4.7.1 Buyer Power
  • 4.7.2 Supplier Power
  • 4.7.3 Threat of New Entrants
  • 4.7.4 Threat of Substitutes
  • 4.7.5 Competitive Rivalry

5 Market Size and Growth Forecasts (Value and Volume)

• 5.1 By Resin
  • 5.1.1 Acrylic
  • 5.1.2 Cyanoacrylate
  • 5.1.3 Epoxy
  • 5.1.4 Polyurethane
  • 5.1.5 Silicone
  • 5.1.6 VAE/EVA
  • 5.1.7 Others
• 5.2 By Technology
  • 5.2.1 Water-borne
  • 5.2.2 Solvent-borne
  • 5.2.3 Reactive
  • 5.2.4 Hot-melt
  • 5.2.5 Sealants (1K and 2K)
• 5.3 By Application
  • 5.3.1 Flooring and Tiling
  • 5.3.2 Roofing
  • 5.3.3 Wall Panels and Facades
  • 5.3.4 Insulation and Weatherproofing
  • 5.3.5 Infrastructure Joints (bridges and tunnels)
• 5.4 By End-use Sector
  • 5.4.1 Residential
  • 5.4.2 Commercial
  • 5.4.3 Industrial
  • 5.4.4 Infrastructure
• 5.5 By Country
  • 5.5.1 France
  • 5.5.2 Germany
  • 5.5.3 Italy
  • 5.5.4 Russia
  • 5.5.5 Spain
  • 5.5.6 United Kingdom
  • 5.5.7 Rest of Europe

6 Competitive Landscape

• 6.1 Market Concentration
• 6.2 Strategic Moves
• 6.3 Market Share/(%)Ranking Analysis
• 6.4 Company Profiles {(includes Global level Overview, Market level overview, Core Segments, Financials as available, Strategic Information, Products and Services, and Recent Developments)}
  • 6.4.1 3M
  • 6.4.2 Arkema
  • 6.4.3 BASF
  • 6.4.4 Dow
  • 6.4.5 fischer Group of Companies
  • 6.4.6 H.B. Fuller Company
  • 6.4.7 Henkel AG & Co. KGaA
  • 6.4.8 Hexion Inc.
  • 6.4.9 Huntsman Corporation
  • 6.4.10 ITW Performance Polymers
  • 6.4.11 MAPEI S.p.A.
  • 6.4.12 Momentive
  • 6.4.13 PPG Industries Inc.
  • 6.4.14 RPM International Inc.
  • 6.4.15 Selena Group
  • 6.4.16 Sika AG
  • 6.4.17 Soudal Group
  • 6.4.18 Wacker Chemie AG

7 Market Opportunities and Future Outlook

• 7.1 White-space and Unmet-Need Assessment
• 7.2 Key Strategic Questions for Adhesive and Sealant CEOs