中東和非洲的黏合劑和密封劑：市場佔有率分析、行業趨勢和統計數據以及成長預測（2025-2031 年）

據 Mordor Intelligence 稱，2025 年中東和非洲的黏合劑和密封劑市場價值為 14.3 億美元，預計到 2031 年將從 2026 年的 15.2 億美元成長到 20.3 億美元，預測期（2026-2031 年）的複合年成長率為 5.98%。

本報告按黏合劑樹脂類型（丙烯酸、環氧樹脂、聚氨酯及其他）、黏合劑技術（熱熔、反應型、溶劑型、紫外光固化型、水性）、密封劑樹脂類型（聚氨酯、矽酮及其他）、終端用戶產業（汽車、建築及其他）和地區（沙烏地阿拉伯、阿拉伯聯合大公國、南非、埃及及其他）進行細分。市場預測以美元計價。

中東和非洲黏合劑和密封劑市場的趨勢和見解。

「沙烏地阿拉伯2030願景」下的大型企劃

公共投資基金（PIF）已撥款400億美元用於NEOM、吉迪亞和薩勒曼國王公園等重點項目，目標是在2025年前完成。 NEOM採用線性城市設計，其帷幕牆玻璃使用添加了紫外線阻隔劑的結構矽酮密封膠，可承受每天12小時的陽光直射。紅海開發公司的海濱別墅專案採用聚氨酯黏合劑，可承受3000小時的鹽霧循環，促使西卡和瓦克化學開發出新型單組分系統。預鑄面板中使用的快速固化環氧樹脂可將施工時間縮短40%，並減少大型建築工地的勞動成本。卡達盧賽爾城第二階段計畫也採用了類似的技術規範，其中反應型聚氨酯密封膠用於黏合高層塔樓的複合材料覆層。

海灣合作理事會—電子商務主導的埃及包裝業蓬勃發展

預計到2025年，阿拉伯聯合大公國電子商務商品總銷售額將達到92億美元，這將推動瓦楞紙箱需求年增18%，並促使水性澱粉黏合劑的普及，以滿足食品接觸法規的要求。埃及的紙板產量預計到2025年將達到180萬噸，這主要得益於亞馬遜和Noon等履約中心的擴張，從而推動了每分鐘60個紙箱生產線上黏合劑的使用。 HB Fuller公司2025年推出的聚烯黏合劑，可在比現有溫度低15攝氏度的溫度下粘合再生牛皮紙襯紙，從而降低加工商12%的能耗。沙烏地阿拉伯的電子商務滲透率預計將加倍，達到零售額的14%，這促使Jowat公司在利雅德開設技術中心，以開發防篡改膠帶配方。此外，反應型聚氨酯層壓黏合劑正在取代可承受 121°C 滅菌的殺菌袋的丙烯酸乳液。

嚴格的VOC法規和綠建築標準

杜拜的綠建築法規將室內黏合劑的揮發性有機化合物（VOC）含量限制在50克/公升，室外黏合劑的VOC含量限制在100克/公升，迫使配方開發商轉向水性系統。南非的「綠色之星」評級體系引入了30克/公升的獎勵標準，但到2025年，只有12%的進口產品符合該標準。沙烏地阿拉伯於2024年採納了GSO 2756標準以符合歐盟的限制，但要求進行第三方測試，這使得產品上市週期延長了六週。重新配製單一產品的成本可能高達15萬美元，這打擊了小規模企業的積極性，並導致市場佔有率集中在擁有專項研發預算的跨國公司手中。埃及將提案的VOC法規的實施推遲到2027年，這給計畫中的水性塗料投資帶來了不確定性。

細分市場分析

預計到2025年，丙烯酸類黏合劑將佔中東和非洲黏合劑及密封劑市場需求的29.46%，佔最高的市場佔有率。這主要歸功於其在電商包裝用感壓膠帶中快速乾燥的特性。聚氨酯類黏合劑預計將以6.24%的複合年成長率成長，其性能優於所有其他化學黏合劑，因為在摩洛哥的汽車擋風玻璃黏合和沙烏地阿拉伯的結構玻璃製造等應用中，聚氨酯類黏合劑需要超過400%的斷裂伸長率。環氧樹脂系統在風力發電機葉片和預製混凝土的黏合應用方面需求不斷成長，但其僅兩小時的短適用期限制了其在工期緊張的施工現場的應用。矽酮類黏合劑主要用於高溫環境下的汽車零件和穿戴式感測器，在這些應用中，符合ISO 10993標準的生物相容性至關重要。

更廣泛的替代趨勢包括：休閒食品包裝複合材料中丙烯酸類黏合劑的偏好日益增強，而聚氨酯類黏合劑在模組化建築板材組裝市場佔有率不斷擴大。氰基丙烯酸酯類黏合劑在售後維修領域仍屬小眾產品，但VAE/EVA熱熔膠在瓦楞紙板密封領域佔據主導地位，其中Jowat和HB Fuller兩家公司佔據了該地區60%的供應量。酚醛和聚醯胺類黏合劑在煞車襯和纖維複合材料領域保持著穩定的需求。隨著大型企劃的推進，中東和非洲地區與聚氨酯組合藥物相關的黏合劑和密封劑市場規模預計將顯著高於整體成長率，這將有望促進供應商加大對本地預聚物合成的投資。

在杜拜實施50克/公升的揮發性有機化合物（VOC）限值後，預計到2025年，水性產品將佔市場需求的37.28%，成為中東和非洲地區黏合劑和密封劑市場中最大的技術佔有率。反應型體系，包括雙組分環氧樹脂和濕固化聚氨酯，預計到2031年將以6.31%的複合年成長率成長，因為高強度和快速固化對於電池組組裝和複合板粘合至關重要。熱熔膠用於高速包裝生產線，而聚烯基產品與EVA基產品相比，可降低12%的能耗。

對溶劑型產品的監管正在分階段收緊，限制了其市場擴張。西卡公司推出了一款可在LED燈8秒固化的矽酮密封黏合劑，使汽車玻璃生產線的停留時間縮短了一半，此後，市場對紫外光固化膠黏劑的需求不斷成長。隨著監管合規期限的臨近，預計水性及紫外光固化產品在中東和非洲黏合劑密封劑市場的佔有率將上升，迫使傳統的溶劑型產品製造商要么升級設備，要么退出利潤較低的細分市場。

其他福利

• Excel格式的市場預測（ME）表
• 3個月的分析師支持

目錄

第1章：引言

• 研究假設和市場定義
• 調查範圍

第2章：調查方法

第3章執行摘要

第4章 市場狀況

• 市場概覽
• 市場促進因素
  • 「沙烏地阿拉伯2030願景」下的大型企劃
  • 海灣合作理事會—電子商務主導的埃及包裝業蓬勃發展
  • 摩洛哥及埃及汽車OEM及售後市場的擴張
  • 模組化建築在東非的傳播
  • 沿岸地區衛生用品用黏合劑的在地採購義務
• 市場限制因素
  • 嚴格的VOC排放法規與綠建築標準
  • 石化原料價格波動
  • 對水溶性化學品冷鏈物流的限制
• 價值鏈分析
• 波特五力模型

第5章 市場規模與成長預測

• 黏合劑樹脂類型
  • 丙烯酸纖維
  • 氰基丙烯酸酯
  • 環氧樹脂
  • 聚氨酯
  • 矽
  • VAE,EVA
  • 其他
• 黏合劑技術
  • 熱熔膠
  • 反應性
  • 溶劑型
  • 紫外線固化型
  • 水溶液
• 密封樹脂類型
  • 聚氨酯
  • 環氧樹脂
  • 丙烯酸纖維
  • 矽
  • 多硫化物
  • 其他
• 按最終用戶行業分類
  • 航太
  • 車
  • 建築/施工
  • 鞋類和皮革
  • 衛生保健
  • 包裝
  • 木工和細木工
  • 其他
• 按地區
  • 沙烏地阿拉伯
  • 南非
  • 阿拉伯聯合大公國
  • 卡達
  • 巴林
  • 埃及
  • 其他中東和非洲國家

第6章 競爭情勢

• 市場集中度
• 策略趨勢
• 市佔率和排名分析
• 公司簡介
  • Arkema
  • AVERY DENNISON CORPORATION
  • 3M
  • Dow
  • HB Fuller Company
  • Henkel AG & Co. KGaA
  • Huntsman International LLC
  • Illinois Tool Works Inc.
  • Jowat SE
  • MAPEI SpA
  • Momentive Performance Materials
  • Permoseal（Pty）Ltd
  • PIDLITE
  • RPM International Inc.
  • HB Fuller Company.
  • Sika AG
  • Soudal Group
  • The Industrial Group Ltd
  • Wacker Chemie AG

第7章 市場機會與未來展望

According to Mordor Intelligence, the Middle East and Africa adhesives and sealants market size was valued at USD 1.43 billion in 2025 and is estimated to grow from USD 1.52 billion in 2026 to reach USD 2.03 billion by 2031, at a CAGR of 5.98% during the forecast period (2026-2031).

This report is Segmented by Adhesives Resin (Acrylic, Epoxy, Polyurethane, and More), Adhesives Technology (Hot-Melt, Reactive, Solvent-Borne, UV-Cured, and Water-Borne), Sealants Resin (Polyurethane, Silicone, and More), End-User Industry (Automotive, Construction, and More), and Geography (Saudi Arabia, UAE, South Africa, Egypt, Rest of MEA). Market Forecasts are in Value (USD).

Middle East And Africa Adhesives And Sealants Market Trends and Insights

Construction Mega-Projects Under Saudi Vision 2030

The Public Investment Fund deployed USD 40 billion in 2025 into anchor projects such as NEOM, Qiddiya, and King Salman Park. Curtain-wall glazing at NEOM's linear city uses structural silicone sealants formulated with UV-blocking additives to withstand 12 hours of daily sun exposure. Marine villas in the Red Sea Development rely on polyurethane adhesives able to resist 3,000-hour salt-fog cycles, prompting new one-component systems from Sika and Wacker Chemie. Fast-cure epoxies on precast panels accelerate schedules by 40%, reducing labor on mega sites. Similar specifications extend to Lusail City Phase II in Qatar, where reactive polyurethane sealants bond composite cladding on high-rise towers.

E-Commerce-Led Packaging Boom Across GCC and Egypt

United Arab Emirates e-commerce gross merchandise value reached USD 9.2 billion in 2025, boosting corrugated-box demand 18% year on year and pushing uptake of water-borne starch adhesives that satisfy food-contact regulations. Egyptian paperboard output climbed to 1.8 million metric tons in 2025 as Amazon and Noon scaled fulfillment hubs, driving hot-melt adhesive usage on 60-carton-per-minute lines. H.B. Fuller's 2025 polyolefin hot-melt bonds recycled kraft liner at 15 °C lower temperatures, cutting converter energy use by 12%. Saudi e-commerce penetration doubled to 14% of retail sales, prompting Jowat to open a Riyadh technical center for tamper-evident tape formulations. Reactive polyurethane laminating adhesives are also displacing acrylic emulsions in retort pouches that survive 121 °C sterilization.

Stringent VOC Regulations and Green-Building Codes

Dubai's Green Building Regulations cap interior adhesive VOC content at 50 g/L and exterior at 100 g/L, steering formulators toward water-borne systems. South Africa's Green Star rating introduced a 30 g/L incentive threshold that just 12% of imported products met in 2025. Saudi Arabia adopted GSO 2756 in 2024, mirroring EU limits and extending product-launch cycles by six weeks due to third-party tests. Reformulation costs reach up to USD 150,000 per product, deterring smaller players and consolidating share among multinationals with dedicated R&D budgets. Egypt deferred its proposed VOC law to 2027, injecting uncertainty into planned water-borne investment.

Other drivers and restraints analyzed in the detailed report include:

1. Automotive OEM and Aftermarket Expansion in Morocco and Egypt
2. Modular Construction Uptake in East Africa
3. Petrochemical Feedstock Price Volatility

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Acrylic adhesives held 29.46% of 2025 demand, the highest share within the Middle East and Africa adhesives and sealants market, owing to their fast-tack performance in pressure-sensitive tapes used for e-commerce parcels. Polyurethane grades are forecast to expand at a 6.24% CAGR, outpacing all other chemistries as automotive windshield bonding in Morocco and structural glazing in Saudi Arabia demand elongation-at-break above 400%. Epoxy systems are witnessing increased demand from wind-turbine blade and precast-concrete bonding, yet their two-hour pot life constrains uptake on rapid site schedules. Silicone adhesives find their applications mainly in high-temperature automotive and wearable-sensor applications where ISO 10993 biocompatibility is mandatory.

Wider substitution trends favor acrylics in packaging laminates for snack foods, while polyurethanes gain in modular-construction panel assembly. Cyanoacrylates remain niche in aftermarket repair, and VAE/EVA hot-melts dominate carton sealing with Jowat and H.B. Fuller controlling 60% regional supply. Phenolic and polyamide adhesives stay stable in brake-lining and textile lamination. As infrastructure megaprojects advance, the Middle East and Africa adhesives and sealants market size linked to polyurethane formulations is projected to rise disproportionately within overall growth, reinforcing supplier investments in local pre-polymer synthesis.

Water-borne chemistries accounted for 37.28% of 2025 demand following Dubai's 50 g/L VOC ceiling, the largest technology share across the Middle East and Africa adhesives and sealants market. Reactive systems, including two-component epoxies and moisture-cure polyurethanes, are projected to grow at a 6.31% CAGR through 2031 as battery-pack assembly and composite panel bonding prioritize high strength with rapid cure. Hot-melts are used in high-speed packaging lines, where polyolefin bases reduce energy use by 12% over EVA options.

Solvent-borne grades face incremental regulation that restricts their expansion. UV-cured adhesives are witnessing rising demand after Sika introduced a silicone sealant that cures in eight seconds under LED lamps, halving automotive glass line dwell time. As compliance deadlines tighten, the Middle East and Africa adhesives and sealants market share of water-borne and UV platforms will rise, compelling legacy solvent formulators to retool or exit low-margin segments.

Complete Report Scope:

• By Adhesives Resin
  • Acrylic
  • Cyanoacrylate
  • Epoxy
  • Polyurethane
  • Silicone
  • VAE/EVA
  • Other Resins
• By Adhesives Technology
  • Hot-Melt
  • Reactive
  • Solvent-Borne
  • UV-Cured
  • Water-Borne
• By Sealants Resin
  • Polyurethane
  • Epoxy
  • Acrylic
  • Silicone
  • Polysulfide
  • Other Resins
• By End-User Industry
  • Aerospace
  • Automotive
  • Building and Construction
  • Footwear and Leather
  • Healthcare
  • Packaging
  • Woodworking and Joinery
  • Other End-user Industries
• By Geography
  • Saudi Arabia
  • South Africa
  • United Arab Emirates
  • Qatar
  • Bahrain
  • Egypt
  • Rest of Middle-East and Africa

List of Companies Covered in this Report:

1. Arkema
2. AVERY DENNISON CORPORATION
3. 3M
4. Dow
5. H.B. Fuller Company
6. Henkel AG & Co. KGaA
7. Huntsman International LLC
8. Illinois Tool Works Inc.
9. Jowat SE
10. MAPEI S.p.A
11. Momentive Performance Materials
12. Permoseal (Pty) Ltd
13. PIDLITE
14. RPM International Inc.
15. H.B. Fuller Company.
16. Sika AG
17. Soudal Group
18. The Industrial Group Ltd
19. Wacker Chemie AG

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 Introduction

• 1.1 Study Assumptions and Market Definition
• 1.2 Scope of the Study

2 Research Methodology

3 Executive Summary

4 Market Landscape

• 4.1 Market Overview
• 4.2 Market Drivers
  • 4.2.1 Construction mega-projects under Saudi Vision 2030
  • 4.2.2 E-commerce-led packaging boom across GCC and Egypt
  • 4.2.3 Automotive OEM and aftermarket expansion in Morocco and Egypt
  • 4.2.4 Modular construction uptake in East Africa
  • 4.2.5 Gulf localisation mandates for hygiene-product adhesives
• 4.3 Market Restraints
  • 4.3.1 Stringent VOC regulations and green-building codes
  • 4.3.2 Petrochemical feed-stock price volatility
  • 4.3.3 Limited cold-chain logistics for water-borne chemistries
• 4.4 Value Chain Analysis
• 4.5 Porter's Five Forces
  • 4.5.1 Bargaining Power of Suppliers
  • 4.5.2 Bargaining Power of Buyers
  • 4.5.3 Threat of New Entrants
  • 4.5.4 Threat of Substitutes
  • 4.5.5 Degree of Competition

5 Market Size and Growth Forecasts (Value)

• 5.1 By Adhesives Resin
  • 5.1.1 Acrylic
  • 5.1.2 Cyanoacrylate
  • 5.1.3 Epoxy
  • 5.1.4 Polyurethane
  • 5.1.5 Silicone
  • 5.1.6 VAE/EVA
  • 5.1.7 Other Resins
• 5.2 By Adhesives Technology
  • 5.2.1 Hot-Melt
  • 5.2.2 Reactive
  • 5.2.3 Solvent-Borne
  • 5.2.4 UV-Cured
  • 5.2.5 Water-Borne
• 5.3 By Sealants Resin
  • 5.3.1 Polyurethane
  • 5.3.2 Epoxy
  • 5.3.3 Acrylic
  • 5.3.4 Silicone
  • 5.3.5 Polysulfide
  • 5.3.6 Other Resins
• 5.4 By End-User Industry
  • 5.4.1 Aerospace
  • 5.4.2 Automotive
  • 5.4.3 Building and Construction
  • 5.4.4 Footwear and Leather
  • 5.4.5 Healthcare
  • 5.4.6 Packaging
  • 5.4.7 Woodworking and Joinery
  • 5.4.8 Other End-user Industries
• 5.5 By Geography
  • 5.5.1 Saudi Arabia
  • 5.5.2 South Africa
  • 5.5.3 United Arab Emirates
  • 5.5.4 Qatar
  • 5.5.5 Bahrain
  • 5.5.6 Egypt
  • 5.5.7 Rest of Middle-East and Africa

6 Competitive Landscape

• 6.1 Market Concentration
• 6.2 Strategic Moves
• 6.3 Market Share/Ranking Analysis
• 6.4 Company Profiles (includes Global-level overview, Market-level overview, Core segments, Financials, Strategic information, Market rank/share, Products and services, Recent developments)
  • 6.4.1 Arkema
  • 6.4.2 AVERY DENNISON CORPORATION
  • 6.4.3 3M
  • 6.4.4 Dow
  • 6.4.5 H.B. Fuller Company
  • 6.4.6 Henkel AG & Co. KGaA
  • 6.4.7 Huntsman International LLC
  • 6.4.8 Illinois Tool Works Inc.
  • 6.4.9 Jowat SE
  • 6.4.10 MAPEI S.p.A
  • 6.4.11 Momentive Performance Materials
  • 6.4.12 Permoseal (Pty) Ltd
  • 6.4.13 PIDLITE
  • 6.4.14 RPM International Inc.
  • 6.4.15 H.B. Fuller Company.
  • 6.4.16 Sika AG
  • 6.4.17 Soudal Group
  • 6.4.18 The Industrial Group Ltd
  • 6.4.19 Wacker Chemie AG

7 Market Opportunities and Future Outlook

• 7.1 White-space and Unmet-Need Assessment