封面
市場調查報告書
商品編碼
2119714

德國資料中心機櫃:市場佔有率分析、產業趨勢與統計及成長預測(2026-2031 年)

Germany Data Center Rack - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2026 - 2031)

出版日期: | 出版商: Mordor Intelligence | 英文 90 Pages | 商品交期: 2-3個工作天內

價格

本網頁內容可能與最新版本有所差異。詳細情況請與我們聯繫。

簡介目錄

根據 Mordor Intelligence 估計,德國資料中心機櫃市場在 2026 年的價值將達到 1.3162 億美元,高於 2025 年的 1.156 億美元,預計到 2031 年將達到 2.5175 億美元。

預計從 2026 年到 2031 年,其複合年成長率將達到 13.86%。

德國資料中心機架市場-IMG1

本報告按機架尺寸(四分之一機架、半機架、全機架)、機架高度(42U、45U、48U)、其他高度(52U及以上,以及客製化高度)、機架類型(機櫃式(密封)機架、開放式機櫃、壁掛式機架)、資料中心類型(機櫃式(密封)機架、開放式機架、壁掛式機架)、資料中心類型(機櫃式(鋼等)和材質細分(鋼材等)進行材料。所有細分市場的規模和預測均以美元(USD)計價。

德國資料中心機櫃市場的趨勢與洞察

法蘭克福地區超大規模雲端運算投資激增。

法蘭克福作為歐洲重要的互聯樞紐,正推動資料中心的快速擴張,預計2024年至2029年間將新增超過240億歐元的容量。微軟承諾投資32億歐元,亞馬遜網路服務(AWS)也承諾投資166億歐元,用於擴大在該地區的業務,這促使德國資料中心機櫃市場向更高的48U機櫃發展,以容納人工智慧GPU線程。 Digital Realty位於FRA18的資料中心坐落於一座指定的文化遺產建築內,這表明,儘管土地稀缺促使資料中心採用創新佈局,但全深度液冷機架仍然至關重要(datacenterknowledge.com)。此外,由於德國保險公司要求堅固的機櫃結構才能降低保費,抗震機架的應用也日益普及。總體而言,對超大規模資料中心領域的資本投資正在集中需求,縮短設備更換週期,並確保大型合約的簽訂,而這些合約有利於本地組裝廠和交貨週期短的供應商。

電信業者對邊緣運算的快速採用

電信業者正在部署分散式微型集線器,以支援 5G 網路切片和低延遲工業IoT,從而擴大德國資料中心機櫃市場的地理覆蓋範圍。德國電信參與歐盟資助的 AI Gigafactory 項目,已在集中製造地區域建立了數十個微型設施,為可由兩名工人安裝的四分之一機架和半機架單元帶來了穩定的訂單。思科為電信業者提供的邊緣節點參考設計要求使用統一、遠端系統管理且符合標準的機櫃,從而簡化無人值守的現場操作。隨著每個 5G 區域都需要自己的微型設施,邊緣節點的需求正在逐步成長。像 Rittal 這樣的本地供應商可以利用其地理位置接近性和快速服務回應能力,滿足營運商對符合德國安全標準的 TÜV 認證機架的需求。

聯邦排放法規下的冗長授權程序

安裝超過2兆瓦柴油備用系統的項目需要根據《聯邦排放法》獲得許可,而公開聽證會和環境評估可能會使工期延長12至18個月。每項新要求,例如餘熱回收計劃、能源管理審計和生物多樣性報告,都會擴大工程範圍,導致機架採購階段延誤。沒有本地合作夥伴的外國參與企業難以應付市級和州級的各項核可階段,有時不得不放棄採購計畫或將產能轉移到荷蘭。對德國資料中心機櫃市場影響最大的因素是訂單的間歇性,這使得國內供應商的工廠規劃和庫存管理變得更加複雜。

細分市場分析

截至2025年,整機架將佔據德國資料中心機櫃市場70.85%的佔有率,預計到2031年將以15.91%的複合年成長率成長,因為超大規模資料中心將GPU叢集的機架高度標準化為42U或更高。這種主導地位反映了規模經濟、統一的線纜管理佈局以及與熱通道封閉系統的易於整合。四分之一機架和半機架用於深度或天花板高度有限的邊緣位置以及整修辦公大樓的地下室,但這兩類機架的銷量總合不到德國資料中心機櫃市場規模的三分之一。對整機架的偏好也符合德國能源效率法(EnEfG)的廢熱條款,因為連續的機架排列可以改善氣流建模,並允許對後門熱交換器進行改造,從而將熱輸出回收到區域供熱迴路中。隨著人工智慧推理節點進入工廠和物流倉庫,緊湊型產品可能會增加,但考慮到超大規模資料中心業者的大規模期貨購買合約,標準化的全機架預計仍將是首選。

為此,德國工程公司正在開發預製模組,這些模組在工廠預先完成佈線並交付完整的機架,將現場施工時間從數週縮短至數天。西門子和Cadlt正在推廣符合ISO標準的貨櫃式設計,該設計包含12個42U機櫃、線上冷卻系統和專用電池組,從而降低了跨區域邊緣基礎設施的總安裝成本。本地製造商也擁有物流優勢。位置法蘭克福,他們可以實現備件的次日送達,這對於受嚴格服務等級協議 (SLA) 約束的託管公司而言至關重要。隨著德國資料中心機櫃的需求擴展到區域城市,靈活的服務交付和快速更換方案將進一步推動完整機架的普及。

作為全球標竿的42U機架在2025年仍將佔據德國資料中心機櫃市場55.12%的佔有率。然而,營運商正在升級到更高的48U機架,以便在不改變面積下容納更多伺服器,從而實現每個機架高達14%的空間節省。預計到2031年,此趨勢將推動該細分市場實現17.08%的複合年成長率,創歷史新高。更高的機架佈局為在伺服器區域上方安裝液體分配歧管提供了額外的空間,從而可以在不干擾運作中的電源軌的情況下進行維護。此外,更高的機架佈局還允許安裝兩個電纜配線架,一個用於光纖,一個用於電源,從而提高故障隔離能力。

在買家中,雖然規模較小,但已出現一種明顯的趨勢,即選擇客製化高度的機架,例如 45U 和 52U 機架,用於容納實驗計算叢集和汽車測試單元的研究實驗室。 Littal 的 400 kW 型號本質上是一個帶有加固立柱的客製化 52U底盤,這表明為了容納每個機櫃功耗超過 130 kW 的 AI 加速器,設計極限正在不斷突破。法蘭克福的層高限制仍然是一個實際障礙。許多新建設施的樓層高度為 3.6 米,這限制了機架的高度。因此,預計德國資料中心機櫃市場不會完全取代傳統的外形規格,從 42U 到 48U 的轉變可能會持續下去。

其他好處:

  • Excel格式的市場預測(ME)表
  • 3個月的分析師支持

目錄

第1章:引言

  • 研究假設和市場定義
  • 調查範圍

第2章:調查方法

第3章執行摘要

第4章 市場狀況

  • 市場概覽
  • 市場促進因素
    • 法蘭克福地區對超大規模雲端服務的投資正在激增。
    • 電信業者對邊緣運算的採用正在迅速擴大。
    • 政府對數位化(GAIA-X計劃)的支持
    • 高密度伺服器和液冷技術的應用正在加速機架更換週期。
    • 對符合德國保險標準的抗震貨架的需求
    • 將棕地工業用地改造為微型資料中心。
  • 市場限制因素
    • 主要資料中心叢集的土地和電力成本不斷上漲
    • 資料安全漏洞和不斷上漲的合規成本
    • 根據《聯邦空氣污染控制法》獲得許可證的流程變得越來越漫長。
    • 具備操作先進密封技術的認證電視安裝人員短缺。
  • 價值供應鏈分析
  • 監管情況(德國聯邦網路局、歐盟資料中心行為準則)
  • 技術趨勢(相容於液冷,48U 或以上機架尺寸)
  • 波特五力模型
  • 市場宏觀經濟趨勢的評估

第5章 市場規模與成長預測

  • 按機架尺寸
    • 四分之一架
    • 半架
    • 全機架
  • 貨架高度
    • 42U
    • 45U
    • 48U
    • 其他高度(52U 和客製訂單)
  • 按機架類型
    • 櫃式(密封型)機架
    • 開放式機架
    • 壁掛式機架
  • 依資料中心類型
    • 託管設施
    • 超大規模和雲端服務供應商的資料中心
    • 企業和邊緣運算
  • 材料
    • 其他合金和複合材料

第6章 競爭情勢

  • 市場集中度
  • 策略趨勢
  • 市佔率分析
  • 公司簡介
    • Eaton Corporation plc
    • Black Box Corporation
    • Rittal GmbH and Co. KG
    • Schneider Electric SE
    • Vertiv Holdings Co
    • Dell Technologies Inc.
    • nVent Electric plc
    • Hewlett Packard Enterprise Co.
    • Econnex Systems Pty Ltd
    • Legrand SA
    • Panduit Corp.
    • Chatsworth Products Inc.
    • Cisco Systems Inc.
    • IBM Corp.
    • Huawei Technologies Co. Ltd.
    • Minkels BV
    • Siemon Company
    • Subzero Engineering
    • Cannon Technologies Ltd.
    • Knrr GmbH

第7章 市場機會與未來展望

簡介目錄
Product Code: 50001069

According to Mordor Intelligence, Germany data center rack market size in 2026 is estimated at USD 131.62 million, growing from 2025 value of USD 115.6 million with 2031 projections showing USD 251.75 million, growing at 13.86% CAGR over 2026-2031.

Germany Data Center Rack - Market - IMG1

This report is Segmented by Rack Size (Quarter Rack, Half Rack, Full Rack), by Rack Height (42U, 45U, 48U), Other Heights (>=52U and Custom), Rack Type (Cabinet (Closed) Racks, Open-Frame Racks, Wall-Mount Rack), Data Center Type (Colocation Facilities and More), Material (Steel and More). The Market Sizes and Forecasts are Provided in Terms of Value (USD) for all the Segments.

Germany Data Center Rack Market Trends and Insights

Surging Hyperscale Cloud Investments in Frankfurt Region

Frankfurt's role as Europe's main interconnection hub fuels an aggressive build-out that commits more than EUR24 billion in capacity between 2024 and 2029. Microsoft has pledged EUR3.2 billion and Amazon Web Services EUR16.6 billion to enlarge regional footprints, pulling the Germany data center rack market toward taller 48U cabinets that can host AI GPU sleds. Digital Realty's FRA18 site, installed inside a listed building, shows how land scarcity pushes innovative layouts that still require full-depth, liquid-ready racks datacenterknowledge.com. Seismic-rated frames also see greater adoption because German insurers link lower premiums to robust cabinet construction. Overall, hyperscale capex concentrates demand, shortens replacement cycles, and locks in volume contracts that favor suppliers with local assembly plants and fast lead times.

Rapid Growth in Edge Computing Deployments by Telecom Operators

Telecom carriers introduce distributed mini-hubs to support 5G network slicing and low-latency industrial IoT, which broadens the geographic spread of the Germany data center rack market. Deutsche Telekom's involvement in the EU-funded AI Gigafactory positions dozens of micro installations across manufacturing corridors, creating steady orders for quarter- and half-racks that can be installed by a two-person crew. Cisco's reference design for telco edge nodes calls for unified, remotely managed, standards-based cabinets that simplify unmanned site operations. Edge nodes stimulate incremental demand because every 5G region needs its own micro-facility, yet operators insist on TUV-certified frames that meet German safety codes, allowing local vendors such as Rittal to capitalize on proximity and fast service response.

Lengthy Permitting Under Federal Immission Control Act

Projects that install more than 2 MW of diesel backup must obtain a Federal Immission Control Act license, lengthening timelines by 12-18 months because of public consultations and environmental reviews. Each new requirement-waste-heat capture plans, energy-management audits, biodiversity reports-adds engineering scope, which then delays the rack procurement stage. International entrants without established local partners struggle to navigate separate city and state approval layers, occasionally abandoning purchase intentions or shifting capacity to the Netherlands. For the Germany data center rack market, the biggest impact is a stop-start order pattern that complicates factory planning and inventory management for domestic suppliers.

Other drivers and restraints analyzed in the detailed report include:

  1. Government Support for Digitalization (GAIA-X Initiative)
  2. Adoption of High-Density Servers and Liquid Cooling Drives Rack Refresh Cycles
  3. Escalating Land and Power Costs in Major Colo Clusters

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Full racks held 70.85% of Germany data center rack market share in 2025, progressing at a 15.91% CAGR through 2031 as hyperscale halls standardize on 42U and taller footprints for GPU clusters. This dominance reflects economies of scale, uniform cable management layouts, and easier hot-aisle containment integration. Quarter racks and half racks serve niche edge locations or retrofitted office basements where depth or ceiling limits prevail, but their combined revenue remains below one-third of the Germany data center rack market size. The preference for full racks also aligns with the EnEfG waste-heat clause, because contiguous rows improve airflow modeling and enable rear-door exchanger retrofits that capture thermal output for district heating loops. As more AI inference nodes migrate to factories and logistics warehouses, compact variants will grow, yet standardized full racks should retain the top position given hyperscalers' sizeable forward purchase contracts.

German engineering groups have responded by developing prefabricated modules where full racks leave the factory pre-wired, reducing site work from weeks to days. Siemens and Cadolto promote an ISO-container design that includes twelve 42U enclosures, in-line cooling, and a dedicated battery pod, lowering total installed cost for multiregional edge fleets. Local fabricators also secure a logistics edge; proximity to Frankfurt permits next-day delivery of spare parts, which remains a critical factor for colocation tenants bound by stringent service-level agreements. As Germany data center rack market demand broadens to secondary cities, flexible service coverage and rapid replacement options will strengthen full-rack adoption further.

42U frameworks, the global benchmark, retained 55.12% share of the Germany data center rack market size in 2025. Operators nonetheless upgrade to taller 48U units to squeeze additional servers into unchanged footprints, achieving up to 14% space savings on a per-rack basis. This trend produces the segment's highest 17.08% CAGR through 2031. Taller layouts offer the headroom to mount liquid distribution manifolds above the server area, which keeps servicing clear of live power rails. They also allow operators to install two cable trays-one for fiber, one for power-improving fault isolation.

A smaller yet visible share of buyers select 45U or 52U custom heights for research labs and automotive test cells that host experimental compute clusters. Rittal's 400 kW specimen, effectively a custom 52U chassis with reinforced uprights, demonstrates how design boundaries are being pushed to accommodate AI accelerators that draw more than 130 kW per cabinet. Ceiling clearance in urban Frankfurt remains the practical governor; most new builds retain a 3.6 m raised-floor height, which imposes a physical cap on rack height. Consequently, the Germany data center rack market will continue to record a migration from 42U toward 48U without fully displacing the legacy form factor.

Complete Report Scope:

  • By Rack Size
    • Quarter Rack
    • Half Rack
    • Full Rack
  • By Rack Height
    • 42U
    • 45U
    • 48U
    • Other Heights (52U and Custom)
  • By Rack Type
    • Cabinet (Closed) Racks
    • Open-Frame Racks
    • Wall-Mount Racks
  • By Data Center Type
    • Colocation Facilities
    • Hyperscale and Cloud Service Provider DCs
    • Enterprise and Edge
  • By Material
    • Steel
    • Aluminum
    • Other Alloys and Composites

List of Companies Covered in this Report:

  1. Eaton Corporation plc
  2. Black Box Corporation
  3. Rittal GmbH and Co. KG
  4. Schneider Electric SE
  5. Vertiv Holdings Co
  6. Dell Technologies Inc.
  7. nVent Electric plc
  8. Hewlett Packard Enterprise Co.
  9. Econnex Systems Pty Ltd
  10. Legrand SA
  11. Panduit Corp.
  12. Chatsworth Products Inc.
  13. Cisco Systems Inc.
  14. IBM Corp.
  15. Huawei Technologies Co. Ltd.
  16. Minkels B.V.
  17. Siemon Company
  18. Subzero Engineering
  19. Cannon Technologies Ltd.
  20. Knrr GmbH

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

  • 1.1 Study Assumptions and Market Definition
  • 1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET LANDSCAPE

  • 4.1 Market Overview
  • 4.2 Market Drivers
    • 4.2.1 Surging hyperscale cloud investments in Frankfurt region
    • 4.2.2 Rapid growth in edge computing deployments by telecom operators
    • 4.2.3 Government support for digitalization (GAIA-X initiative)
    • 4.2.4 Adoption of high-density servers and liquid cooling drives rack refresh cycles
    • 4.2.5 Demand for seismic-rated racks to meet German insurance standards
    • 4.2.6 Retrofit of brownfield industrial sites into micro data centers
  • 4.3 Market Restraints
    • 4.3.1 Escalating land and power costs in major colo clusters
    • 4.3.2 Data security breaches and compliance cost escalation
    • 4.3.3 Lengthy permitting under Federal Immission Control Act
    • 4.3.4 Shortage of TV-certified installers for advanced containment
  • 4.4 Value / Supply-Chain Analysis
  • 4.5 Regulatory Landscape (BNetzA, EU Code of Conduct for DCs)
  • 4.6 Technological Outlook (liquid-cool ready, 48U+ tall racks)
  • 4.7 Porters Five Forces
    • 4.7.1 Threat of New Entrants
    • 4.7.2 Bargaining Power of Suppliers
    • 4.7.3 Bargaining Power of Buyers
    • 4.7.4 Threat of Substitutes
    • 4.7.5 Intensity of Competitive Rivalry
  • 4.8 Assessment of Macro Economic Trends on the Market

5 MARKET SIZE AND GROWTH FORECASTS (VALUE)

  • 5.1 By Rack Size
    • 5.1.1 Quarter Rack
    • 5.1.2 Half Rack
    • 5.1.3 Full Rack
  • 5.2 By Rack Height
    • 5.2.1 42U
    • 5.2.2 45U
    • 5.2.3 48U
    • 5.2.4 Other Heights (52U and Custom)
  • 5.3 By Rack Type
    • 5.3.1 Cabinet (Closed) Racks
    • 5.3.2 Open-Frame Racks
    • 5.3.3 Wall-Mount Racks
  • 5.4 By Data Center Type
    • 5.4.1 Colocation Facilities
    • 5.4.2 Hyperscale and Cloud Service Provider DCs
    • 5.4.3 Enterprise and Edge
  • 5.5 By Material
    • 5.5.1 Steel
    • 5.5.2 Aluminum
    • 5.5.3 Other Alloys and Composites

6 COMPETITIVE LANDSCAPE

  • 6.1 Market Concentration
  • 6.2 Strategic Moves
  • 6.3 Market Share Analysis
  • 6.4 Company Profiles (includes Global level Overview, Market level overview, Core Segments, Financials as available, Strategic Information, Market Rank/Share, Products and Services, Recent Developments)
    • 6.4.1 Eaton Corporation plc
    • 6.4.2 Black Box Corporation
    • 6.4.3 Rittal GmbH and Co. KG
    • 6.4.4 Schneider Electric SE
    • 6.4.5 Vertiv Holdings Co
    • 6.4.6 Dell Technologies Inc.
    • 6.4.7 nVent Electric plc
    • 6.4.8 Hewlett Packard Enterprise Co.
    • 6.4.9 Econnex Systems Pty Ltd
    • 6.4.10 Legrand SA
    • 6.4.11 Panduit Corp.
    • 6.4.12 Chatsworth Products Inc.
    • 6.4.13 Cisco Systems Inc.
    • 6.4.14 IBM Corp.
    • 6.4.15 Huawei Technologies Co. Ltd.
    • 6.4.16 Minkels B.V.
    • 6.4.17 Siemon Company
    • 6.4.18 Subzero Engineering
    • 6.4.19 Cannon Technologies Ltd.
    • 6.4.20 Knrr GmbH

7 MARKET OPPORTUNITIES and FUTURE OUTLOOK

  • 7.1 White-space and Unmet-need Assessment