封面
市場調查報告書
商品編碼
2148224

AI資料中心電源和冷卻監控感測器市場規模、佔有率和成長預測(2026-2032年)

AI Data Center Power and Cooling Monitoring Sensors Market Size, Share & Growth Forecast (2026-2032)

出版日期: | 出版商: Knowledge Sourcing Intelligence | 英文 148 Pages | 商品交期: 最快1-2個工作天內

價格
簡介目錄

預計到 2026 年,人工智慧資料中心電源和冷卻監控感測器市場規模將達到 10.5 億美元,到 2032 年將達到 32.7 億美元。這意味著從 2026 年到 2032 年的複合年成長率將達到 20.8%。

物理感測層涵蓋多個電氣和熱域。在機架層面,操作人員監控進氣和排氣溫度、濕度、露點和氣流,以確保其餘風冷組件在運作範圍內。 Vertiv Geist 的環境感測器整合了溫度、濕度、露點和氣流測量功能,並可直接連接到智慧機架電源分配單元和環境監測器。 Vaisala 提供高精度溫濕度傳送器,適用於需要更嚴格控制和校準穩定性的應用。這些感測器在液冷 AI 機架中也至關重要,因為電源供應器、網路設備、儲存和其他組件可能會持續向空氣中釋放熱量。液冷系統又增加了一組感測器。冷卻液分配單元和二次流體網路需要在多個點進行溫度、流量和壓力測量,以監控熱傳遞、偵測堵塞並保護冷板免受熱衝擊和流量減少的影響。洩漏感知器安裝在歧管和軟管連接處附近、機架底部以及管道沿線。隨著機架密度的增加,電源監控也變得更精細。智慧型機架式配電單元和線上式電錶可測量輸入、支路或輸出端的電流、電壓、有功功率、電能和功率因數。感測器和智慧配電單元之間的商業性界線正日益模糊。

市場促進因素

  • 液冷技術在整個傳熱鏈中新增了多個感測點。直接冷卻至終端的系統引入了一個技術冷卻迴路,需要持續監測,而不能簡單地將其視為被動管道。每個冷卻劑分配單元、歧管和主要分支點可能需要監測溫度、壓力、流量和洩漏情況,因為流體狀況會影響腐蝕、結垢以及冷板的長期性能。Schneider Electric2026年指南將感測器故障、冷卻劑劣化、過濾器堵塞和洩漏列為可能迅速影響高密度人工智慧系統的運作風險。因此,隨著傳統室內空氣冷卻的減少和液冷技術應用的增加,每個機架和每兆瓦的感測器數量將會增加。
  • 隨著人工智慧 (AI) 功率密度的增加,機架級電氣遙測的重要性日益凸顯。 AI 機架的功率正從數十千瓦躍升至幾百千瓦,使得電路負載、電流不平衡和電氣故障的影響更加關鍵。 Raritan 的機架式和線上式儀表可提供電流、電壓、功率、功率因數和能量的詳細測量數據,而洩漏感測器則可在安全問題或運作發生之前檢測到洩漏情況。這一市場機會不僅源於儀器數量的增加,還源於每個機架測量點數量的增加以及更高的採樣率要求——因為功率集中在少數高價值的機架級系統中。 AI 的負載波動也催生了對更快機架和電路功率遙測的需求。
  • 封閉回路型自動化依賴感測器的品質。如果沒有可靠的實體測量數據,數位孿生、預測性維護和自主冷卻平台都無法可靠運作。感測器漂移、校準誤差或壓力/溫度探頭故障都可能導致誤報和控制行為異常。維薩拉強調人工智慧冷卻系統需要低漂移測量,而Schneider Electric則將監測視為支援液冷系統可靠性的核心要素。隨著越來越多的設施採用自動設定點控制,感測器的精度、冗餘性和校準的商業性重要性已遠遠超過單一設備的成本。
  • 人工智慧在現有設施中的應用推動了對獨立監控設備的需求成長。現有資料中心通常會在更換整個監控架構之前,先添加高密度人工智慧機架。營運商無需重構建築管理系統或整個資料中心基礎設施管理堆疊,即可部署機架感測器、線上功率計、洩漏檢測電纜和本地閘道器。 Vertiv Geist 和 Raritan 的產品專為即插即用的感測器擴充而設計,從而提供了切實可行的維修方案。這不僅為大規模現有設施市場創造了商機,也為整合到新型冷卻液分配單元、智慧配電單元和模組化人工智慧基礎設施中的感測器帶來了商機。

市場限制因素

  • 主要阻礙因素在於感測器在大型設備平台中日益增強的整合度。感測器正擴大作為標準配置整合到冷卻液分配單元、智慧配電單元、冷卻器和機架系統中,這可能會縮小獨立感測器的可見市場,並對單價造成壓力。超大規模業者也會大量採購感測器,這進一步壓低了平均售價。感測器數量的激增本身也帶來了營運方面的挑戰。成千上萬個測量點需要進行校準、命名、網路連接和維護。無線感測可以簡化部署,但電池維護、無線策略或可靠性要求可能會限制其在某些關鍵任務區域的應用。最後,更先進的分析技術可以透過從少量高品質測量點推斷系統狀況來減少所需的感測器數量。

目錄

第1章:執行摘要

  • 市場機會與主要發現
  • 人工智慧資料中心感測器密度趨勢
  • 主要收入來源

第2章 市場概覽

  • 人工智慧基礎設施中的實體感測層
  • 機架環境監控
  • 水冷系統的監測要求
  • 機架及電路電源遙測
  • 感測器閘道器和邊緣監控

第3章 市場規模及預測(2026-2032 年)

  • 全球市場銷售
  • 年增率分析
  • 每個機架的感測器數量和兆瓦數
  • 嵌入式和獨立式感測器的銷售

第4章 市場:依感測器類型分類

  • 溫度、濕度、露點和氣流感測器
  • 冷卻水溫度、流量和壓力感測器
  • 洩漏檢測感測器和電纜
  • 用於機架和電路的功率測量感測器
  • 洩漏感測器和電氣故障感測器
  • 振動和設備狀態感測器

第5章 市場:引言 分層

  • 機架和機櫃
  • 機架式PDU和柱級配電
  • 冷卻液分配單元
  • 二次流體網路
  • 數據空洞和閒置頻段
  • 設施內的機房及電氣室

第6章 市場:依監測目的

  • 熱性能和冷凝控制的監測
  • 水冷系統的可靠性
  • 能源和容量監測
  • 電氣安全和故障檢測
  • 預測性維護和設備完整性

第7章 市場:依部署方式分類

  • 新建設的人工智慧工廠
  • 超大規模和託管擴展
  • 將人工智慧引入現有系統
  • 政府和企業人工智慧設施

第8章 市場:依客戶類型分類

  • 超大規模雲端供應商
  • Neocloud 和 GPU 雲端供應商
  • 託管服務提供者
  • 企業和高效能運算
  • 設備原始設備製造商和系統整合商

第9章:地方市場

  • 北美洲
    • 美國
    • 加拿大
  • 歐洲
  • 亞太地區
  • 中東和世界其他地區

第10章 市場動態

  • 促進因素
    • 水冷式人工智慧基礎設施的擴展
    • 提高每個機架的功率密度
    • 封閉回路型自動化對感測器品質的依賴性
    • 棕地人工智慧監控升級
  • 抑制因子
    • 將感測器整合到大規模的設備平台中
    • 超大規模帶來的價格壓力
    • 校準和感測器集群管理的複雜性。
    • 透過高階分析實現感測器市場整合

第11章 競爭格局

  • 市場結構與競爭強度
  • 在電力、環境和液體冷卻領域應用廣泛的感測技術。
  • 嵌入式和獨立式感測器定位
  • 與 PDU、CDU、BMS 和 DCIM 生態系統整合
  • OEM和基礎設施平台合作夥伴關係

第12章:公司簡介

  • Schneider Electric
  • Vertiv
  • Legrand/Raritan/Server Technology
  • Vaisala
  • Honeywell
  • Johnson Controls
  • Siemens
  • Sensaphone
  • AKCP
  • RLE Technologies
  • nVent
  • Belimo
  • Endress+Hauser
  • TE Connectivity
  • Amphenol

第14章附錄

簡介目錄

The AI Data Center Power and Cooling Monitoring Sensors Market is estimated at USD 1.05 billion in 2026 and is projected to reach USD 3.27 billion by 2032, representing a CAGR of 20.8% during 2026-2032.

The physical sensing layer spans several electrical and thermal domains. At the rack, operators monitor inlet and outlet temperature, humidity, dew point and airflow to verify that residual air-cooled components remain within operating limits. Vertiv Geist environmental sensors combine temperature, humidity, dew point and airflow measurements and connect directly to intelligent rack power distribution units or environmental monitors. Vaisala provides higher-accuracy temperature and humidity transmitters used where tighter control or calibration stability is required. These sensors remain important even in liquid-cooled AI racks because power supplies, networking, storage and other components may continue to reject heat to air. Liquid cooling adds a second sensor stack. Coolant distribution units and secondary fluid networks require temperature, flow and pressure measurement at multiple points to confirm heat transfer, detect restrictions and protect cold plates from thermal shock or loss of flow. Leak sensors are placed near manifolds, hose connections, under racks and along piping routes. Power monitoring becomes more granular as rack density rises. Intelligent rack power distribution units and inline meters measure current, voltage, active power, energy and power factor at the inlet, branch or outlet level. The commercial boundary between a sensor and an intelligent power distribution unit is increasingly integrated.

Market Drivers

  • Liquid cooling creates new sensing points throughout the thermal chain. Direct-to-chip systems introduce a technology cooling loop that must be continuously observed rather than treated as passive plumbing. Each coolant distribution unit, manifold and major branch can require temperature, pressure, flow and leak sensing, while fluid condition affects corrosion, fouling and long-term cold-plate performance. Schneider Electric's 2026 guidance identifies sensor failures, coolant degradation, clogged filters and leaks among the operational risks that can rapidly affect high-density AI systems. More liquid-cooled megawatts therefore increase sensor content per rack and per megawatt even as traditional room-air cooling declines.
  • AI power density increases the value of rack-level electrical telemetry. AI racks are moving from tens of kilowatts toward several hundred kilowatts, making circuit loading, current imbalance and electrical faults more consequential. Raritan rack and inline meters provide granular current, voltage, power, power factor and energy measurements, while residual-current sensors can detect leakage conditions before they create safety or uptime problems. The market opportunity is driven not simply by more meters, but by more measurement points per rack and faster sampling requirements as power becomes concentrated into fewer, higher-value rack-scale systems. AI load swings create demand for faster rack and circuit power telemetry.
  • Closed-loop automation depends on sensor quality. Digital twins, predictive maintenance and autonomous cooling platforms cannot operate reliably without trustworthy physical measurements. Sensor drift, calibration errors or failed pressure and temperature probes can cause false alarms or incorrect control actions. Vaisala emphasizes low-drift measurement for AI-ready cooling, while Schneider Electric identifies monitoring as a core element of liquid-cooling reliability. As more facilities move toward automated setpoint control, the commercial importance of sensor accuracy, redundancy and calibration increases beyond the cost of the individual device.
  • Brownfield AI retrofits expand standalone monitoring demand. Existing data centers often add high-density AI racks before replacing the full monitoring architecture. Operators can deploy rack sensors, inline power meters, leak-detection cables and local gateways without rebuilding the entire building management system or data-center infrastructure management stack. Vertiv Geist and Raritan products are designed for plug-and-play sensor expansion, creating a practical retrofit path. This supports a large installed-base opportunity alongside sensors embedded in new coolant distribution units, intelligent power distribution units and modular AI infrastructure.

Market Restraints

  • The main restraint is increasing sensor integration inside larger equipment platforms. Coolant distribution units, intelligent power distribution units, chillers and rack systems increasingly include sensing as standard, which can reduce the visible stand-alone sensor market and compress unit pricing. Hyperscale operators also purchase sensors in high volumes and can drive down average selling prices. Sensor proliferation creates its own operational challenge. Thousands of measurement points require calibration, naming, network connectivity and maintenance. Wireless sensing can simplify deployment but may be avoided in selected mission-critical zones because of battery maintenance, radio-policy or reliability requirements. Finally, better analytics can sometimes reduce the number of sensors required by inferring conditions from fewer high-quality measurement points.

Technology and Segment Insights

  • Temperature, humidity, dew point and airflow sensing represent the largest installed hardware layer in 2026 because these measurements are deployed broadly across rack rows, air inlets, return paths and critical rooms. Their unit value is relatively low, but the number of measurement points is large. High-density AI increases sensor density around rack inlets and liquid-cooling interfaces where small thermal deviations can affect accelerator performance. Rack temperature, humidity and airflow sensing remain the largest installed hardware layer.
  • Liquid-cooling monitoring is the fastest-growing segment through 2032. Flow, pressure, coolant temperature, leak detection and fluid-condition sensing expand directly with liquid-cooled racks, coolant distribution units and secondary networks. Leak detection carries especially high operational value because a small failure can damage high-value compute equipment. Liquid-cooling leak and fluid-condition sensing is the fastest-growing sensor category through 2032. Power and electrical sensing remains another major category, increasingly embedded within rack power distribution units and inline meters but counted here only for the sensing and metering content. Residual-current and electrical-fault sensing form a smaller 2026 base with fast growth. Vibration and equipment-condition sensing form an emerging supporting layer for pump, fan and mechanical predictive-maintenance monitoring.
  • By deployment layer, the market spans rack and cabinet, rack power distribution unit and row power distribution, coolant distribution unit, secondary fluid network, data hall and white space, and facility mechanical and electrical rooms. By monitoring objective, the market covers thermal performance and condensation control, liquid-cooling reliability, energy and capacity monitoring, electrical safety and fault detection, and predictive maintenance and equipment health. By deployment type, the market spans greenfield AI factories, hyperscale and colocation expansions, brownfield AI retrofits, and sovereign and enterprise AI facilities. By customer type, demand comes from hyperscale cloud providers, neocloud and graphics-processor-cloud operators, colocation providers, enterprise and high-performance computing, and equipment original equipment manufacturers and system integrators.

Competitive and Strategic Outlook

  • The competitive landscape spans critical-infrastructure suppliers, industrial measurement companies and specialist environmental-monitoring vendors. Schneider Electric, Vertiv and Legrand have strong positions because they combine sensors with rack power, cooling and monitoring hardware. Vaisala differentiates through measurement accuracy and calibration stability, particularly for temperature, humidity and dew point. Honeywell, Johnson Controls and Siemens participate through broader building automation and industrial sensing portfolios that can be integrated into data-center control systems.
  • Specialist vendors remain important in retrofit and distributed monitoring. Sensaphone, AKCP and RLE Technologies offer environmental, leak and remote-monitoring systems that can be deployed without replacing the primary building management system. nVent combines sensing with rack and liquid-cooling infrastructure, while Belimo and Endress+Hauser contribute flow, pressure, temperature and hydronic measurement technologies relevant to liquid-cooled data-center systems. TE Connectivity and Amphenol participate through component-level temperature, pressure and electrical sensing that can be embedded within power and cooling equipment.
  • Competitive differentiation centers on accuracy, drift, response time, sensor density, ease of deployment, protocol support, calibration requirements and reliability under continuous operation. In AI data centers, vendors also need to support tighter integration across rack power and liquid cooling. The most defensible positions are therefore moving from isolated sensors toward validated sensing ecosystems that connect reliably to power distribution units, coolant distribution units, building management systems, data-center infrastructure management and autonomous-control platforms without locking customers into a single software layer.
  • Recent developments confirm accelerating demand. In July 2026, Schneider Electric published updated guidance on liquid-cooling failures in AI data centers, identifying sensor failures, leaks, coolant degradation and pump faults as critical monitoring requirements. In June 2026, Schneider Electric published fluid-management guidance describing continuous leak, temperature and pressure sensing as a core reliability requirement for direct-to-chip systems. In April 2026, Vaisala showcased high-accuracy temperature and humidity sensors engineered for AI-ready data-center cooling at Data Center World in Washington, D.C. During 2026, Vertiv published dedicated guidance on leak detection and intervention for cold-plate and rear-door liquid-cooling deployments. Vertiv CoolChip coolant distribution unit platforms integrated intelligent flow monitoring, temperature control and leak-detection functionality within high-density AI cooling equipment. Legrand Raritan PX4 platforms continued expansion of granular rack power, residual-current and environmental sensing within a common monitoring architecture. Vertiv Geist environmental-monitoring platforms supported combined temperature, humidity, dew point, airflow and leak sensing across rack and room environments. Liquid-cooling commissioning guidance increasingly emphasized pressure testing, leak detection, fluid sampling and continuous coolant monitoring before AI racks enter production.
  • North America is the largest market for AI data-center power and cooling monitoring sensors because the United States combines rapid hyperscale AI construction with a large installed base of existing facilities being upgraded for liquid cooling. New AI campuses require sensing at the rack, coolant distribution unit, secondary fluid network, electrical distribution and facility-cooling layers, while brownfield projects often add standalone environmental and leak sensors before broader infrastructure replacement. This creates demand across both embedded and retrofit sensor architectures.
  • The supplier ecosystem is broad. Vertiv and Legrand brands Raritan and Server Technology combine rack power telemetry with environmental sensing. Schneider Electric integrates sensors across its EcoStruxure, Motivair and critical-power portfolios. Vaisala supplies precision temperature, humidity and dew-point measurement for cooling control. Sensaphone, AKCP and RLE Technologies focus on environmental, leak and remote monitoring, while Honeywell, Johnson Controls and Siemens participate through building and facility sensing. nVent contributes leak, temperature and rack-infrastructure monitoring within critical environments.
  • Liquid cooling is the strongest incremental demand driver. High-density AI deployments create many more sensing points for flow, pressure, temperature and leaks than conventional air-cooled racks. Operators also require tighter correlation between rack power and cooling performance, increasing the value of synchronized telemetry. Through 2032, North American growth is expected to be led by embedded coolant distribution unit sensing, rack-level power telemetry, leak detection and higher-accuracy environmental measurement in both new AI factories and retrofit data halls.
  • Europe benefits from strong energy-efficiency requirements, mature building management system adoption and a significant colocation base, supporting precision sensing and metering. Asia Pacific combines rapid AI data-center deployment with electronics and sensor manufacturing, especially in China, Japan, South Korea, Taiwan, Singapore, Malaysia and India. The Middle East is emerging as a large greenfield market where sensor networks can be designed into AI campuses from initial construction rather than layered onto legacy infrastructure.

Conclusion

  • The AI data center power and cooling monitoring sensors market is positioned for strong expansion, growing from USD 1.05 billion in 2026 to USD 3.27 billion by 2032 at a compound annual growth rate of 20.8 percent. Rack temperature, humidity and airflow sensing remain the largest installed hardware layer, while liquid-cooling leak and fluid-condition sensing is the fastest-growing sensor category through 2032. AI load swings create demand for faster rack and circuit power telemetry. North America leads demand through hyperscale AI and liquid-cooling deployment, with Europe, Asia Pacific and the Middle East contributing through energy-efficiency requirements, manufacturing ecosystems and greenfield AI campuses. Sensor integration within larger equipment platforms and hyperscale pricing pressure moderate revenue growth, while calibration and sensor-fleet management complexity grows with deployment scale. Vendors that combine accuracy, drift control, response time and validated integration across power, cooling and monitoring ecosystems are best positioned to capture value as sensing becomes a foundational layer for AI data-center reliability and autonomous control.

Key Benefits of this Report

  • Insightful Analysis: Detailed market insights across regions, customer segments, policies, socio-economic factors, consumer preferences, and industry verticals.
  • Competitive Landscape: Understand strategic moves by key players to identify optimal market entry approaches.
  • Market Drivers and Future Trends: Assess major growth forces and emerging developments shaping the market.
  • Actionable Recommendations: Support strategic decisions to unlock new revenue streams.
  • Caters to a Wide Audience: Suitable for startups, research institutions, consultants, SMEs, and large enterprises.

What Businesses Use Our Reports For

  • Industry and market insights, opportunity assessment, product demand forecasting, market entry strategy, geographical expansion, capital investment decisions, regulatory analysis, new product development, and competitive intelligence.

Report Coverage

  • Historical data from 2021 to 2024, Base year 2025, and Forecast years from 2026 to 2032
  • Growth opportunities, challenges, supply chain outlook, regulatory framework, and trend analysis
  • Competitive positioning, strategies, and market share evaluation, and trade analysis
  • Revenue growth and forecast assessment across segments and regions
  • Company profiling including strategies, products, financials, and key developments

TABLE OF CONTENTS

1. Executive Summary

  • 1.1. Market Opportunity and Key Findings
  • 1.2. Sensor Density Evolution in AI Data Centers
  • 1.3. Principal Revenue Pools

2. Market Overview

  • 2.1. Physical Sensing Layer in AI Infrastructure
  • 2.2. Rack Environmental Monitoring
  • 2.3. Liquid-Cooling Monitoring Requirements
  • 2.4. Rack and Circuit Power Telemetry
  • 2.5. Sensor Gateways and Edge Monitoring

3. Market Size and Forecast, 2026-2032

  • 3.1. Global Market Revenue
  • 3.2. Annual Growth Analysis
  • 3.3. Sensor Content per Rack and MW
  • 3.4. Embedded versus Standalone Sensor Revenue

4. Market by Sensor Type

  • 4.1. Temperature, Humidity, Dew Point and Airflow Sensors
  • 4.2. Coolant Temperature, Flow and Pressure Sensors
  • 4.3. Leak Detection Sensors and Cables
  • 4.4. Rack and Circuit Power Metering Sensors
  • 4.5. Residual-Current and Electrical-Fault Sensors
  • 4.6. Vibration and Equipment-Condition Sensors

5. Market by Deployment Layer

  • 5.1. Rack and Cabinet
  • 5.2. Rack PDU and Row Power Distribution
  • 5.3. Coolant Distribution Unit
  • 5.4. Secondary Fluid Network
  • 5.5. Data Hall and White Space
  • 5.6. Facility Mechanical and Electrical Rooms

6. Market by Monitoring Objective

  • 6.1. Thermal Performance and Condensation Control
  • 6.2. Liquid-Cooling Reliability
  • 6.3. Energy and Capacity Monitoring
  • 6.4. Electrical Safety and Fault Detection
  • 6.5. Predictive Maintenance and Equipment Health

7. Market by Deployment Type

  • 7.1. Greenfield AI Factories
  • 7.2. Hyperscale and Colocation Expansions
  • 7.3. Brownfield AI Retrofits
  • 7.4. Sovereign and Enterprise AI Facilities

8. Market by Customer Type

  • 8.1. Hyperscale Cloud Providers
  • 8.2. Neocloud and GPU-Cloud Operators
  • 8.3. Colocation Providers
  • 8.4. Enterprise and High-Performance Computing
  • 8.5. Equipment OEMs and System Integrators

9. Regional Market

  • 9.1. North America
    • 9.1.1. United States
    • 9.1.2. Canada
  • 9.2. Europe
  • 9.3. Asia Pacific
  • 9.4. Middle East and Rest of World

10. Market Dynamics

  • 10.1. Drivers
    • 10.1.1. Expansion of Liquid-Cooled AI Infrastructure
    • 10.1.2. Rising Rack Power Density
    • 10.1.3. Dependence of Closed-Loop Automation on Sensor Quality
    • 10.1.4. Brownfield AI Monitoring Upgrades
  • 10.2. Restraints
    • 10.2.1. Sensor Integration within Larger Equipment Platforms
    • 10.2.2. Hyperscale Pricing Pressure
    • 10.2.3. Calibration and Sensor-Fleet Management Complexity
    • 10.2.4. Sensor Consolidation through Advanced Analytics

11. Competitive Landscape

  • 11.1. Market Structure and Competitive Intensity
  • 11.2. Portfolio Breadth Across Power, Environmental and Liquid-Cooling Sensing
  • 11.3. Embedded versus Standalone Sensor Positioning
  • 11.4. Integration with PDU, CDU, BMS and DCIM Ecosystems
  • 11.5. OEM and Infrastructure-Platform Partnerships

12. Company Profiles

  • 12.1. Schneider Electric
  • 12.2. Vertiv
  • 12.3. Legrand / Raritan / Server Technology
  • 12.4. Vaisala
  • 12.5. Honeywell
  • 12.6. Johnson Controls
  • 12.7. Siemens
  • 12.8. Sensaphone
  • 12.9. AKCP
  • 12.10. RLE Technologies
  • 12.11. nVent
  • 12.12. Belimo
  • 12.13. Endress+Hauser
  • 12.14. TE Connectivity
  • 12.15. Amphenol

14. Appendix