越南建築化學品市場：市場佔有率分析、產業趨勢與統計及成長預測（2026-2031）

據 Mordor Intelligence 稱，越南建築化學品市場預計將從 2025 年的 4.2171 億美元成長到 2026 年的 4.5262 億美元，到 2031 年達到 6.4467 億美元，2026 年至 2031 年的複合年成長率為 7.33%。

本報告按產品類別（黏合劑、錨固件和水泥漿、混凝土外加劑、混凝土保護塗料、地板樹脂、修補和再生化學品、密封劑、表面處理化學品、防水解決方案）和最終用途類別（商業、工業和公共設施、基礎設施、住宅）進行細分。市場預測以價值（美元）表示。

越南建築化學品市場趨勢及洞察

大型基礎設施項目正在推動對特種外加劑的需求。

諸如CT.33公路、大橋和隆城國際機場等高速公路、橋樑和機場項目需要使用耐氯砂漿和第三代聚羧酸醚高性能減水劑，即使在環境溫度超過35 度C的情況下也能保持良好的施工性能。光是東部南北高速公路二期工程預計在五個施工季內就需要20萬噸外加劑、修補砂漿和表面處理材料。承包商正在對SikaPlast-396 VN和BestFlow A325等品牌產品進行預篩選，以確保水灰比低於0.35，並達到28天抗壓強度超過60 MPa。擁有現場技術服務團隊的供應商能夠確保在多年專案的每個階段都能獲得持續穩定的大批量訂單，從而保證在整個設計、施工和營運週期內均符合規範要求。

從現場攪拌混凝土過渡到預拌混凝土

為減少粉塵和交通堵塞，城市法規限制現場混凝土攪拌，這加速了預拌混凝土（RMC）廠向ISO 9001認證的現代化工廠的轉型。在RMC物流領域，對緩凝劑和黏度調節劑的需求日益成長，這些添加劑能夠延長混凝土在郊區（例如平陽省）長達30公里的運輸距離內的坍落度壽命。能夠以±0.1%的精度計量外加劑的數位化計量平台，已將材料浪費減少了20%，並將抗壓強度偏差降低了高達25%。這推動了對具有嚴格控制的混合料公差的高品質外加劑的需求。

石油化學樹脂價格波動

2024年，PVC、環氧樹脂和聚氨酯等原物料價格在三個月內飆升15%至20%，對依賴進口樹脂且無法透過長期合約對沖價格風險的製造商造成了衝擊。年產量低於5000噸的中小型製造商面臨價格飆升和產品上市延遲等挑戰。相較之下，大型企業則轉向生物基原料和再生多元醇，以降低對原油價格的依賴。例如，聖戈班的生質能燃料「DURAflex」產品線每年可減少2000噸範圍1二氧化碳排放，這顯示本地採購的原料可以緩解價格波動的影響。

細分市場分析

2025年，防水解決方案在越南建築化學品市場佔了45.66%的佔有率。這主要得益於胡志明市的法規，該法規強制要求海拔3公尺以下的地下室必須使用高彈性防水卷材。雖然該類別涵蓋了結晶質外加劑、滲透型密封劑和卷材，但防水卷材的附加價值更高，因為它們被用於地鐵隧道、污水處理廠和需要多層裂縫橋接系統的深層平台式停車場。 2024年，Bestmix向75家大型工廠交付了10萬噸「Bestseal」防水卷材，反映了越南建築化學品市場的巨大需求。

混凝土外加劑是成長最快的細分市場，預計到2031年將以8.19%的複合年成長率成長，穩步擴大其在越南建築化學品市場的佔有率。在預拌混凝土攪拌站，預先計量添加高性能聚羧酸醚類減水劑，例如SikaPlast-396 VN和MC-PowerFlow 2116，即使在35 度C的沿海濕度條件下，也能使混凝土28天強度超過60 MPa。此外，高速鐵路高架橋和40層綜合用途塔樓對混凝土外加劑的需求也在不斷成長，這些項目需要使用坍落度保持劑和流變改性劑將混凝土泵送到200公尺以上的高度。

黏合劑、錨固件和水泥漿、密封劑、防護塗料、地板樹脂和修補化學品面向高價值的細分市場，例如符合良好生產規範 (GMP) 的抗震錨固件和地板材料。經 TCVN 10304, 2025 認證的環氧樹脂錨固件用於風力發電機基礎和港口起重機軌道，而防靜電放電 (ESD) 地板材料正在成為北寧省電子設備潔淨室的主流材料。碳纖維層壓板和注塑環氧樹脂現已成為橋樑維修工程的標準材料。

其他好處：

• Excel格式的市場預測（ME）表
• 3個月的分析師支持

目錄

第1章：引言

• 研究假設和市場定義
• 調查範圍

第2章：調查方法

第3章執行摘要

第4章 市場狀況

• 市場概覽
• 市場促進因素
  • 大型基礎設施項目正在推動對特種外加劑的需求。
  • 從現澆混凝土過渡到預拌混凝土
  • 綠色標籤認證產品的快速普及
  • 擴大維修和重組項目
  • 現場的數位化管理和品管系統正在推動高級產品的採用。
• 市場限制因素
  • 石化樹脂價格波動
  • 施用器生態系的分散性阻礙了規範的遵守。
  • 仿冒防水產品會損害品牌聲譽。
• 價值鏈分析
• 監理情勢
• 波特五力模型

第5章 市場規模與成長預測

• 依產品
  • 黏合劑
    • 熱熔膠
    • 反應性
    • 溶劑型
    • 水溶液
  • 錨栓和水泥漿
    • 水泥基固定材料
    • 樹脂固定
  • 混凝土外加劑
    • 過早硬化劑
    • 空氣注入劑
    • 高效減水劑
    • 延誤代理人
    • 收縮抑制劑
    • 黏度調節劑
    • 塑化劑
    • 其他混凝土外加劑
  • 混凝土保護塗層
    • 丙烯酸纖維
    • 阿爾基多
    • 環氧樹脂
    • 聚氨酯
    • 其他混凝土保護塗層
  • 地板樹脂
    • 丙烯酸纖維
    • 環氧樹脂
    • 聚天門冬胺酸
    • 聚氨酯
    • 其他地板樹脂
  • 用於維修和修復的化學品
    • 纖維纏繞系統
    • 水泥漿
    • 微混凝土砂漿
    • 改質砂漿
    • 鋼筋保護劑
  • 密封劑
    • 丙烯酸纖維
    • 環氧樹脂
    • 聚氨酯
    • 矽酮
    • 其他密封劑
  • 表面處理化學品
    • 硬化劑
    • 釋放劑
    • 其他表面處理化學品
  • 防水解決方案
    • 化學品
    • 膜
• 按最終用途行業分類
  • 商業
  • 工業和公共機構
  • 基礎設施
  • 住宅

第6章 競爭情勢

• 市場集中度
• 策略趨勢
• 市佔率和排名分析
• 公司簡介
  • Adchem Construction Chemical（Amcor）
  • BESTMIX CORPORATION
  • GPS Vietnam
  • MAPEI SpA
  • MC-Bauchemie
  • Saint-Gobain
  • Schomburg
  • Sika AG
  • Thermax Limited

第7章 市場機會與未來展望

According to Mordor Intelligence, the vietnam construction chemicals market size is expected to increase from USD 421.71 million in 2025 to USD 452.62 million in 2026 and reach USD 644.67 million by 2031, growing at a CAGR of 7.33% over 2026-2031.

This report is Segmented by Product (Adhesives, Anchors and Grouts, Concrete Admixtures, Concrete Protective Coatings, Flooring Resins, Repair and Rehabilitation Chemicals, Sealants, Surface-Treatment Chemicals, and Waterproofing Solutions) and End-Use Sector (Commercial, Industrial and Institutional, Infrastructure, and Residential). The Market Forecasts are Provided in Terms of Value (USD).

Vietnam Construction Chemicals Market Trends and Insights

Mega-Infrastructure Pipeline Boosts Specialty-Admixture Demand

Expressways, bridges, and airport projects such as CT.33, Dai Ngai Bridge, and Long Thanh International Airport require chloride-resistant mortars and third-generation polycarboxylate ether superplasticizers that maintain workability at ambient temperatures above 35 °C. The Eastern North-South Expressway Phase 2 alone is estimated to require 200,000 tonnes of admixtures, repair mortars, and surface treatments over five construction seasons Contractors pre-qualify branded systems such as SikaPlast-396 VN and BestFlow A325 to achieve water-cement ratios below 0.35 and 28-day compressive strengths exceeding 60 MPa. Suppliers embedding technical service teams in site laboratories secure recurring volume orders across multiyear project phases, ensuring specification compliance throughout the design-build-operate cycle.

Transition from On-Site Mixed to Ready-Mixed Concrete

Urban ordinances restricting on-site batching to reduce dust and traffic congestion are accelerating the shift toward ISO 9001-certified ready-mixed concrete (RMC) plants. RMC logistics drive demand for retarders and viscosity modifiers that extend slump life over delivery distances of up to 30 km in peri-urban areas such as Binh Duong. Digital dosing platforms, which measure admixtures with +-0.1% precision, have reduced material waste by 20% and compressive-strength variability by up to 25%, reinforcing the preference for premium admixtures with precise formulation tolerances.

Volatility in Petrochemical-Based Resin Prices

In 2024, prices for PVC, epoxy, and polyurethane feedstocks surged by 15-20% within three months, impacting manufacturers reliant on imported resins and unable to hedge long-term contracts. Smaller producers with annual outputs below 5,000 tonnes faced challenges, including price increases and delayed product launches. In contrast, larger companies diversified into bio-based inputs and recycled polyols to reduce dependency on crude oil prices. For example, Saint-Gobain's biomass-powered DURAflex line reduces Scope 1 CO2 emissions by 2,000 tonnes annually, demonstrating how localized feedstocks can mitigate price volatility.

Other drivers and restraints analyzed in the detailed report include:

1. Rapid Penetration of Green-Label Certified Products
2. Growth of Renovation and Reconstruction Projects
3. Fragmented Applicator Ecosystem Limits Spec-Compliance

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Waterproofing solutions accounted for 45.66% of the Vietnam construction chemicals market share in 2025, driven by Ho Chi Minh City regulations requiring high-elasticity membranes for basements situated below 3 meters sea level. This category includes crystalline admixtures, penetrating sealers, and membrane rolls, with membranes holding higher value due to their use in metro tunnels, wastewater plants, and deep-podium car parks that need multi-layer, crack-bridging systems. Bestmix delivered 100,000 tonnes of BestSeal membranes to 75 mega factories in 2024, reflecting the high-volume demand in the Vietnam construction chemicals market.

Concrete admixtures is the fastest-growing segment, with an 8.19% CAGR projected through 2031, steadily increasing its share in the Vietnam construction chemicals market. Ready-mixed concrete plants pre-dose polycarboxylate ether superplasticizers like SikaPlast-396 VN and MC-PowerFlow 2116 to achieve 28-day strengths exceeding 60 MPa, even under 35 °C coastal humidity. The demand for admixtures is also rising due to high-speed railway viaducts and 40-story composite towers that require slump-retaining retarders and rheology-modifying agents to pump concrete above 200 meters.

Adhesives, anchors and grouts, sealants, protective coatings, flooring resins, and repair chemicals cater to high-value niches such as seismic anchorage and (Good Manufacturing Practice)-compliant flooring. Epoxy anchors certified to TCVN 10304:2025 are used for wind-turbine foundations and port crane rails, while electrostatic-discharge-safe floor toppings dominate electronics clean rooms in Bac Ninh. Carbon-fiber laminates and injection epoxies are now standard for bridge rehabilitation projects.

List of Companies Covered in this Report:

1. Adchem Construction Chemical (Amcor)
2. BESTMIX CORPORATION
3. GPS Vietnam
4. MAPEI S.p.A.
5. MC-Bauchemie
6. Saint-Gobain
7. Schomburg
8. Sika AG
9. Thermax Limited

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 Introduction

• 1.1 Study Assumptions and Market Definition
• 1.2 Scope of the Study

2 Research Methodology

3 Executive Summary

4 Market Landscape

• 4.1 Market Overview
• 4.2 Market Drivers
  • 4.2.1 Mega-infrastructure pipeline boosts specialty-admixture demand
  • 4.2.2 Transition from on-site mixed to ready-mixed concrete
  • 4.2.3 Rapid penetration of green-label certified products
  • 4.2.4 Growth of renovation and reconstruction projects
  • 4.2.5 Digitalised job-site dosing and QA systems lift premium uptake
• 4.3 Market Restraints
  • 4.3.1 Volatility in petro-chemical-based resin prices
  • 4.3.2 Fragmented applicator ecosystem limits spec-compliance
  • 4.3.3 Counterfeit waterproofing products erode brand trust
• 4.4 Value Chain Analysis
• 4.5 Regulatory Landscape
• 4.6 Porter's Five Forces
  • 4.6.1 Threat of New Entrants
  • 4.6.2 Bargaining Power of Suppliers
  • 4.6.3 Bargaining Power of Buyers
  • 4.6.4 Threat of Substitutes
  • 4.6.5 Competitive Rivalry

5 Market Size and Growth Forecasts (Value)

• 5.1 By Product
  • 5.1.1 Adhesives
    • 5.1.1.1 Hot-Melt
    • 5.1.1.2 Reactive
    • 5.1.1.3 Solvent-borne
    • 5.1.1.4 Water-borne
  • 5.1.2 Anchors and Grouts
    • 5.1.2.1 Cementitious Fixing
    • 5.1.2.2 Resin Fixing
  • 5.1.3 Concrete Admixtures
    • 5.1.3.1 Accelerator
    • 5.1.3.2 Air-Entraining
    • 5.1.3.3 Super-plasticiser
    • 5.1.3.4 Retarder
    • 5.1.3.5 Shrinkage-Reducer
    • 5.1.3.6 Viscosity-Modifier
    • 5.1.3.7 Plasticizer
    • 5.1.3.8 Other Concrete Admixtures
  • 5.1.4 Concrete Protective Coatings
    • 5.1.4.1 Acrylic
    • 5.1.4.2 Alkyd
    • 5.1.4.3 Epoxy
    • 5.1.4.4 Polyurethane
    • 5.1.4.5 Other Concrete Protective Coatings
  • 5.1.5 Flooring Resins
    • 5.1.5.1 Acrylic
    • 5.1.5.2 Epoxy
    • 5.1.5.3 Polyaspartic
    • 5.1.5.4 Polyurethane
    • 5.1.5.5 Other Flooring Resins
  • 5.1.6 Repair and Rehabilitation Chemicals
    • 5.1.6.1 Fiber-Wrapping Systems
    • 5.1.6.2 Injection Grouting
    • 5.1.6.3 Micro-concrete Mortars
    • 5.1.6.4 Modified Mortars
    • 5.1.6.5 Rebar Protectors
  • 5.1.7 Sealants
    • 5.1.7.1 Acrylic
    • 5.1.7.2 Epoxy
    • 5.1.7.3 Polyurethane
    • 5.1.7.4 Silicone
    • 5.1.7.5 Other Sealants
  • 5.1.8 Surface-Treatment Chemicals
    • 5.1.8.1 Curing Compounds
    • 5.1.8.2 Mold-Release Agents
    • 5.1.8.3 Other Surface-Treatment Chemicals
  • 5.1.9 Waterproofing Solutions
    • 5.1.9.1 Chemicals
    • 5.1.9.2 Membranes
• 5.2 By End-Use Sector
  • 5.2.1 Commercial
  • 5.2.2 Industrial and Institutional
  • 5.2.3 Infrastructure
  • 5.2.4 Residential

6 Competitive Landscape

• 6.1 Market Concentration
• 6.2 Strategic Moves
• 6.3 Market Share (%)/Ranking Analysis
• 6.4 Company Profiles (includes Global level Overview, Market level overview, Core Segments, Financials as available, Strategic Information, Products and Services, and Recent Developments)
  • 6.4.1 Adchem Construction Chemical (Amcor)
  • 6.4.2 BESTMIX CORPORATION
  • 6.4.3 GPS Vietnam
  • 6.4.4 MAPEI S.p.A.
  • 6.4.5 MC-Bauchemie
  • 6.4.6 Saint-Gobain
  • 6.4.7 Schomburg
  • 6.4.8 Sika AG
  • 6.4.9 Thermax Limited

7 Market Opportunities and Future Outlook

• 7.1 White-space and Unmet-Need Assessment