歐洲環氧膠黏劑：市場佔有率分析、產業趨勢與統計、成長預測（2025-2030）

Europe Epoxy Adhesive - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2025 - 2030)

出版日期: 2025年03月18日 | 出版商:

Mordor Intelligence | 英文 196 Pages | 商品交期: 2-3個工作天內

價格

※ 本網頁內容可能與最新版本有所差異。詳細情況請與我們聯繫。

簡介目錄

預計 2024 年歐洲環氧膠合劑市場規模將達到 14.6 億美元，預計到 2028 年將達到 18.5 億美元，預測期內（2024-2028 年）的複合年成長率為 6.08%。

環氧膠粘劑在汽車應用中的不斷成長將推動市場成長

環氧樹脂膠黏劑是熱固性樹脂，固化後具有高強度和低收縮性。這些黏合劑堅韌且耐化學性和環境損害。此外，環氧膠黏劑對各種基材具有優異的黏合性、優異的耐溶劑性和良好的電絕緣性。
2020年環氧膠黏劑的消費量與2019年相比下降了12%，這主要是由於德國、義大利、法國和英國等許多國家受到COVID-19的負面影響。由於停工、供應鏈中斷和經濟放緩，這些國家的生產受到阻礙，進而導致環氧膠黏劑消費下降。此外，這些國家的經濟復甦導致2021年環氧膠合劑產量增加，產量增加了8%。
德國在該地區環氧膠黏劑市場佔有率最大，接近21%，其次是法國和俄羅斯。由於汽車和建築行業的需求不斷成長，這一趨勢在未來幾年可能會持續下去。由於電動車產量的成長，汽車產業成為該地區環氧膠黏劑的最大消費產業。環氧樹脂膠黏劑主要用於結構應用，是用於黏合金屬、玻璃和塑膠的所有樹脂基膠黏劑中抗張強度最高的，約為 35-41N/mm2。然而，由於電子電氣設備、機車和船舶等關鍵領域的應用不斷增加，到 2028 年底，其他終端用戶產業可能會在數量上佔據主要市場佔有率。預計這些趨勢將在未來幾年推動對環氧膠黏劑的需求。

汽車產業對環氧膠的使用日益增加，推動了市場的成長

環氧樹脂膠黏劑因其優異的黏合性、物理性能和抗損傷性而成為最廣泛使用的材料之一。大多數環氧樹脂衍生雙酚 A 縮水甘油醚等石化產品。其基本成分不可再生，最終產品即使在最溫和的條件下也不可分解、不可回收，導致嚴重的廢棄物污染。水和蒸氣對環氧膠合劑化合物的影響較小，因為它們比其他基質材料更耐腐蝕。主要缺點是成本相對較高、固化週期較長、處理困難。近日，新研究推出了以大豆油為原料生產綠色環氧膠黏劑的方法。由於其永續的特性，這些黏合劑預計將得到更廣泛的應用，這可能會導致未來幾年需求激增。
領先的環氧樹脂製造商 Olin Corporation 宣布暫時減少位於德國施塔德工廠的綜合環氧樹脂產量。 2022 年第二季度，奧林發現歐洲對環氧樹脂的需求低於預期，俄羅斯入侵烏克蘭的不確定性加劇了這一情況。這一因素導致該地區環氧膠黏劑產量下降、供應有限，導致全部區域環氧膠黏劑價格上漲。
在所有終端使用領域中，汽車是全球環氧樹脂的最大消費者，約佔 27.4% 的佔有率，其次是建築、醫療保健、航太和木工，分別約佔 16.2%、12.3%、9.1% 和 9% 的佔有率。

歐洲環氧膠黏劑市場趨勢

政府推廣電動車的支持措施將擴大電動車產業

歐洲人均GDP為34,230美元，2022與前一年同期比較成長1.6%。汽車工業部門約佔GDP總量的2%。 2021年，歐洲汽車產量將佔乘用車81%，商用車17%，其他2%。
2020年，德國、義大利、西班牙、俄羅斯、英國等多個歐洲國家都受到新冠疫情影響。疫情擾亂了供應鏈，導致各國工廠關閉，並造成晶片短缺，影響了歐洲的汽車生產。汽車產量與2019年相比大幅下降22%。
美國25.3%的汽車進口來自歐洲，其中德國和英國是主要進口國，2021年分別佔10.3%和4.7%。 2022年初，俄羅斯入侵烏克蘭導致新車銷售下降20.5%，也反映在汽車產量上。 2022年第一季歐洲汽車市場與去年同期相比下降了10.6%。
由於許多歐洲國家正在對電動車進行新的投資，因此在 2022-2027 年期間，汽車產量的複合年成長率可能達到 2.25%。例如，西班牙計劃投資51億美元用於電動車生產。

新建築的激增和不斷成長的重建需求正在推動該行業的發展

受新冠疫情影響，2020年建設業整體收益大幅下降。
歐洲建築業的銷售額呈現驚人的成長勢頭，2021與前一年同期比較率與 2020 年相比最高。這得歸功於歐盟委員會的舉措和措施的成功，例如在名為「下一代歐盟」的新冠疫情復甦計劃下向所有行業注資 7500 億歐元。根據歐盟下一代計劃，建築業獲得了最大的投資，因為歐洲對建築的綠色化和數位化目標導致現有建築和結構的年度維修增加。
根據 EUROCONSTRUCT 報告，在基於歐盟政治區域的細分市場中，中歐和東歐預計將以 6.4% 的複合年成長率成長，其次是西歐，複合年成長率為 6.1%。
歐盟和國家層面的政策制定者正在透過各種政策（包括《建築能源性能指令》）優先考慮新建築和現有建築的能源效率。這些政策將導致預測期內整體建築收益增加。

歐洲環氧膠黏劑產業概況

歐洲環氧膠黏劑市場適度整合，前五大公司佔63.03%的市佔率。該市場的主要企業有：阿科瑪集團、HB Fuller 公司、漢高股份公司、馬貝公司和西卡股份公司（按字母順序排列）

其他福利

Excel 格式的市場預測 (ME) 表
3個月的分析師支持

Epoxy adhesives are thermosetting resins that demonstrate high strength and low shrinkage during their curing time. These adhesives are tough and resistant to chemicals and environmental damage. Moreover, epoxy adhesives offer excellent adhesion to various substrates, superior resistance solvents, and good electrical insulation.
The consumption of epoxy adhesives shrunk by 12% in 2020 compared to 2019, mainly due to the adverse impact of COVID-19 in many countries, including Germany, Italy, France, and the United Kingdom. Production was hampered in these countries owing to the lockdowns, supply chain disruptions, and economic slowdown, which resulted in a decline in the consumption of epoxy adhesives as well. Moreover, the economic recovery in the countries caused to rise in the production of epoxy adhesives in 2021 by registering a growth of 8% in terms of volume.
Germany has accounted for the highest market share of nearly 21% for epoxy adhesives in the region, followed by France and Russia. The trend will likely continue in the upcoming years owing to the constant growth in demand from the automotive and construction industries. Automotive has witnessed the largest consumer industry of epoxy adhesives in the region owing to the rising electric vehicle production. Epoxy adhesive is mainly used in structural applications and gives the highest tensile strength, around 35-41 N/mm2, among all other resin-based adhesives to bond metal, glass, and plastic. However, the other end-user industries will likely capture the major market share in terms of volume at the end of 2028 due to the rising applications in the major sectors such as electronics and electrical appliances, locomotive, and marine. Such a trend will drive the demand for epoxy adhesives in the coming years.

Increase in usage of epoxy adhesives in the automotive industry to boost the market growth

Epoxy adhesive is one of the most widely used materials due to its remarkable adhesiveness, physical properties, and damage tolerance. The majority of epoxy resins are derived from petroleum chemicals such as bisphenol A glycidyl ether. Their essential constituents are non-renewable, and the final products are impossible to degrade and recycle under even the mildest conditions, resulting in severe waste contamination. Water and steam have less impact on epoxy adhesive compounds than other matrix materials, as they have higher corrosion resistance. Their main disadvantages are the comparatively high cost, the lengthy cure period, and the difficult handling. Recently, new research introduced the production of green epoxy adhesives, which are produced from soybean oil. These adhesives are expected to witness higher adoption due to their sustainable properties, which as a result, may upsurge their demand over the coming years.
Olin Corporation, one of the largest producers of epoxy resins, announced the temporary curtailing of its integrated epoxy production at its Stade, Germany, facility. During Q2 2022, Olin experienced weaker epoxy resin demand in Europe than anticipated, exacerbated by uncertainties following the Russian invasion of Ukraine. This factor reduced the production of epoxy adhesives in the region and also limited their availability, which, as a result, has increased the price of epoxy adhesives across the region.
Across all the end-use sectors, automotive is the leading consumer of epoxy globally, holding a share of about 27.4%, followed by building and construction, healthcare, aerospace, and woodworking, with shares of approximately 16.2%, 12.3%, 9.1%, and 9%, respectively.

Europe Epoxy Adhesive Market Trends

Supportive government initiatives to promote electric vehicles will raise the industry size

Europe has a GDP of 34,230 USD per capita with a growth rate of 1.6% y-o-y in 2022. The automotive industry sector contributes a percentage of around 2% of the total GDP. The European vehicle production comprises 81% passenger vehicles, 17% commercial vehicles, and 2% other vehicles in 2021.
In 2020, many European countries were affected by the COVID-19 pandemic, including Germany, Italy, Spain, Russia, and the United Kingdom. The pandemic resulted in supply chain disruptions, lockdowns in the countries, and chip shortages which affected automotive production in Europe. The production of vehicles sharply declined by 22% compared to 2019.
The United States imports 25.3% worth of cars from Europe and became one of the leading importers of the United States, where Germany accounted for 10.3% and the United Kingdom for 4.7% of total imports of vehicles in the country in 2021. At the beginning of 2022, the sale of the new vehicle dropped by 20.5% due to the invasion of Ukraine by Russia, which reflected in vehicle production as well. In the first quarter of 2022, the European automotive market was down by 10.6% compared to the same period last year.
Vehicle production is likely to grow with a CAGR of 2.25% during the period (2022 to 2027) due to the new investments being made in electric vehicles by many European countries. For instance, Spain is going to invest USD 5.1 billion in electric vehicle production.

Rapid growth of new construction along with rising need for renovation activities will drive the industry

The overall revenue of construction showed a steep decrement in 2020 because of the impact of the pandemic situation due to COVID-19, which led to an overall recovery slowdown and social distancing measures on work sites.
The overall revenue of the construction sector in Europe grew tremendously, with the highest year-on-year growth in 2021 compared to that of 2020 because of the initiatives and measures taken by the EU Commission, such as the infusion of EUR 750 billion for all sectors under the COVID recovery plan named Next Generation EU. Under the Next Generation EU plan, the construction sector received the maximum investment because of the European objective of green and digital transition in buildings which led to growth in the annual renovation rate of existing buildings and structures.
As per the EUROCONSTRUCT report, among the segments of the European Union based on political geography, Central and Eastern Europe are expected to register a CAGR of 6.4%, followed by Western Europe at a CAGR of 6.1% in 2022-2024.
The policymakers at European Union and national level are prioritizing the construction of new buildings and conversion of existing buildings to be energy efficient through various policies including Energy Performance of Buildings Directive and others. These policies will lead to an increase in overall revenue for construction in the forecast period.

Europe Epoxy Adhesive Industry Overview

The Europe Epoxy Adhesive Market is moderately consolidated, with the top five companies occupying 63.03%. The major players in this market are Arkema Group, H.B. Fuller Company, Henkel AG & Co. KGaA, MAPEI S.p.A. and Sika AG (sorted alphabetically).

Additional Benefits:

The market estimate (ME) sheet in Excel format
3 months of analyst support

1 EXECUTIVE SUMMARY & KEY FINDINGS

2 REPORT OFFERS

3 INTRODUCTION

3.1 Study Assumptions & Market Definition
3.2 Scope of the Study
3.3 Research Methodology

4 KEY INDUSTRY TRENDS

4.1 End User Trends
- 4.1.1 Aerospace
- 4.1.2 Automotive
- 4.1.3 Building and Construction
- 4.1.4 Footwear and Leather
- 4.1.5 Packaging
- 4.1.6 Woodworking and Joinery
4.2 Regulatory Framework
- 4.2.1 EU
- 4.2.2 Russia
4.3 Value Chain & Distribution Channel Analysis

5 MARKET SEGMENTATION (includes market size in Value in USD and Volume, Forecasts up to 2028 and analysis of growth prospects)

5.1 End User Industry
- 5.1.1 Aerospace
- 5.1.2 Automotive
- 5.1.3 Building and Construction
- 5.1.4 Footwear and Leather
- 5.1.5 Healthcare
- 5.1.6 Packaging
- 5.1.7 Woodworking and Joinery
- 5.1.8 Other End-user Industries
5.2 Technology
- 5.2.1 Reactive
- 5.2.2 Solvent-borne
- 5.2.3 UV Cured Adhesives
- 5.2.4 Water-borne
5.3 Country
- 5.3.1 France
- 5.3.2 Germany
- 5.3.3 Italy
- 5.3.4 Russia
- 5.3.5 Spain
- 5.3.6 United Kingdom
- 5.3.7 Rest of Europe

6 COMPETITIVE LANDSCAPE

6.1 Key Strategic Moves
6.2 Market Share Analysis
6.3 Company Landscape
6.4 Company Profiles (includes Global Level Overview, Market Level Overview, Core Business Segments, Financials, Headcount, Key Information, Market Rank, Market Share, Products and Services, and Analysis of Recent Developments).
- 6.4.1 3M
- 6.4.2 Arkema Group
- 6.4.3 Beardow Adams
- 6.4.4 H.B. Fuller Company
- 6.4.5 Henkel AG & Co. KGaA
- 6.4.6 Huntsman International LLC
- 6.4.7 Jowat SE
- 6.4.8 MAPEI S.p.A.
- 6.4.9 Sika AG
- 6.4.10 Soudal Holding N.V.

7 KEY STRATEGIC QUESTIONS FOR ADHESIVES AND SEALANTS CEOS

8 APPENDIX

8.1 Global Adhesives and Sealants Industry Overview
- 8.1.1 Overview
- 8.1.2 Porter's Five Forces Framework (Industry Attractiveness Analysis)
- 8.1.3 Global Value Chain Analysis
- 8.1.4 Drivers, Restraints, and Opportunities
8.2 Sources & References
8.3 List of Tables & Figures
8.4 Primary Insights
8.5 Data Pack
8.6 Glossary of Terms