![]() |
市場調查報告書
商品編碼
2041609
停機坪巴士市場預測至2034年-按類型、負載容量、最終用戶和地區分類的全球分析Apron Buses Market Forecasts to 2034 - Global Analysis By Type (Fuel Type, Electric Type and Other Types), Capacity (Small, Medium and Large), End User and By Geography |
||||||
根據 Stratistics MRC 的數據,預計到 2026 年,全球圍裙式浴缸市場規模將達到 6.371 億美元,並在預測期內以 11% 的複合年成長率成長,到 2034 年將達到 14.759 億美元。
停機坪巴士(也稱為停機坪擺渡車或坡道巴士)是機場營運中用於接送乘客、機組人員和機場工作人員往返於航站樓和停機坪或坡道區域的飛機之間的專用車輛。停機坪巴士提高了行動不便或需要特殊協助的旅客的出行便利性。對於步行長途跋涉有困難的乘客來說,巴士也使他們能夠更方便地前往飛機所在位置。
航空旅行需求成長
隨著全球航空旅行的持續成長,對高效地面支援服務的需求日益增加,其中包括航站樓之間以及停機坪上飛機之間的旅客運輸。停機坪擺渡車在保障旅客、機組人員和機場工作人員在空側區域內順暢通行方面發揮著至關重要的作用。此外,這些擺渡車還能確保旅客及時登機和下機,並縮短飛機週轉時間,進而提高營運效率。
高昂的維護和營運成本
現代停機坪擺渡車採用的先進技術,例如電氣系統和自動駕駛系統,通常需要維修人員接受專門培訓並具備專業技能。這增加了維護成本,對預算有限的機場構成挑戰。此外,營運成本包括燃料、能源和人事費用,這些都是機場管理部門需要考慮的主要經濟因素。因此,高昂的維護和營運成本成為限制市場擴張的重要因素。
機場擴建
機場擴建是停機坪巴士市場的主要驅動力。隨著機場擴建以滿足日益成長的航空旅行需求,高效的地面交通解決方案變得至關重要。停機坪巴士在促進旅客和工作人員在廣闊的停機坪區域內流動,並確保航站樓與飛機之間的無縫銜接方面發揮關鍵作用。此外,這些巴士還有助於提高營運效率,加快旅客登機和下機速度,減少停機坪堵塞,並最佳化飛機週轉時間。
基礎設施限制
停機坪的實體空間有限,多架飛機和地面保障車輛同時運作,這給引入更大或更先進的停機坪巴士帶來了挑戰。現有的航站樓佈局和網路基地台可能無法滿足現代停機坪巴士的營運需求,從而影響其效率並造成擁擠問題。此外,維修機場基礎設施以支援新技術可能是一個耗時耗資的過程。這些因素都在阻礙市場成長。
新冠疫情的感染疾病
新冠疫情對機場擺渡車市場產生了重大影響。疫情導致的廣泛旅行限制、客運量下降以及營運約束,使得機場擺渡車的需求大幅下滑。此外,疫情期間機場和航空公司面臨的財務壓力也影響了資本投資,可能導致機場擺渡車車隊的更新和擴建投資計畫延遲。
在預測期內,預計電動車領域將佔據最大佔有率。
據估計,電動巴士將佔據最大的市場佔有率。這些巴士通常採用電池驅動的電力推進系統,消除直接排放,減少機場停機坪的碳足跡。電動停機坪巴士的一大優點是噪音水平低於傳統的柴油巴士,有助於營造更安靜、更舒適的機場環境。這種類型的停機坪巴士不僅支持環保目標,也反映了航空業致力於打造更環保、永續的航空未來的承諾。
在預測期內,商業機場領域預計將呈現最高的複合年成長率。
預計在預測期內,商用機場市場將實現顯著成長。全球商用機場都依賴停機坪擺渡車來提升營運柔軟性,尤其是在尖峰時段和基礎設施受限的情況下。商用機場停機坪擺渡車市場也不斷發展,技術和設計不斷進步,旨在提高效率、減少環境影響,並滿足現代航空旅行日益成長的需求。
在預測期內,北美佔據了最大的市場佔有率。憑藉其龐大且高度發達的航空業,北美依靠停機坪擺渡車來高效管理地面運營和旅客流動。這些擺渡車在實現航站樓與停機坪上停放的飛機之間的無縫銜接方面發揮著至關重要的作用,尤其是在直接通往登機口的通道有限的情況下。市場正經歷持續的發展,重點在於技術創新、環境永續性以及滿足嚴格的安全和性能標準。
預計亞太地區在預測期內將實現盈利成長,這主要得益於全部區域機場的強勁成長和擴張。不斷成長的航空旅行需求、快速的都市化和經濟發展正在推動機場基礎設施項目的激增,進而帶動了對高效地面交通解決方案(包括停機坪巴士)的需求成長。此外,中國和印度等航空業快速成長的國家對機場建設的大量投資也大大促進了停機坪巴士市場的擴張。
According to Stratistics MRC, the Global Apron Buses Market is accounted for $637.1 million in 2026 and is expected to reach $1475.9 million by 2034 growing at a CAGR of 11% during the forecast period. Apron buses, also known as apron coaches or ramp buses, are specialized vehicles used in airport operations to transport passengers, airline crew, and airport personnel between the terminal buildings and aircraft located on the apron or ramp area. Apron buses improve accessibility for passengers with reduced mobility or special assistance needs. They can navigate closer to aircraft positions, making it easier for passengers who may face challenges traversing long distances on foot.
Air traffic growth
As global air travel continues to expand, there is an increasing demand for efficient ground support services, including the transportation of passengers between terminals and aircraft on the apron. Apron buses play a crucial role in facilitating the seamless movement of passengers, airline crew, and airport staff within the airside area. Moreover, these buses enhance operational efficiency by ensuring timely boarding and disembarkation of passengers, reducing turnaround times for aircraft.
High maintenance and operational costs
The sophisticated technologies integrated into modern apron buses, including electric and autonomous systems, often require specialized training and expertise for maintenance personnel. This can lead to increased maintenance costs, posing a challenge for airports with constrained budgets. Moreover, operational costs encompass fuel, energy, and labor expenses, contributing to the overall economic considerations for airport authorities. As a result, high maintenance and operational costs are a significant restraint hampering market expansion.
Airport expansion
Airport expansion serves as a significant driver in the apron buses market. As airports undergo expansions to accommodate the escalating demand for air travel, the requirement for efficient ground transportation solutions becomes paramount. Apron buses play a crucial role in facilitating the movement of passengers and personnel across the expansive apron areas, ensuring seamless connectivity between terminals and aircraft. Moreover, these buses contribute to streamlined operations by expediting passenger boarding and disembarkation processes, reducing congestion on the tarmac, and optimizing aircraft turnaround times.
Infrastructure limitations
Limited physical space on aprons, where multiple aircraft and ground support vehicles operate simultaneously, poses challenges for the deployment of larger or more sophisticated apron buses. Existing terminal layouts and access points may not align with the operational needs of modern apron buses, impacting their efficiency and causing congestion issues. Moreover, retrofitting airports with updated infrastructure to support new technologies can be a costly and time-consuming process. These factors hinder the market growth.
Covid-19 Impact
The COVID-19 pandemic has significantly impacted the apron buses market. The widespread travel restrictions, reduced passenger volumes, and operational constraints imposed by the pandemic have led to a notable decline in demand for apron buses. Furthermore, the financial strain on airports and airlines during the pandemic has impacted capital expenditure, potentially delaying investments in upgrading or expanding apron bus fleets.
The electric type segment is expected to be the largest during the forecast period
The electric type segment is estimated to hold the largest share. These buses are powered by electric propulsion systems, usually batteries, eliminating direct emissions and reducing the carbon footprint on the airport apron. The key advantage of electric apron buses is their reduced noise levels compared to their traditional diesel counterparts, which contributes to a quieter and more pleasant airport environment. This type of apron bus not only supports environmental goals but also reflects the industry's commitment to a greener and more sustainable aviation future.
The commercial airport segment is expected to have the highest CAGR during the forecast period
The commercial airport segment is anticipated to have lucrative growth during the forecast period. Commercial airports worldwide rely on apron buses to enhance operational flexibility, especially during peak travel times or when faced with infrastructure constraints. The commercial airport apron buses market continues to evolve, with advancements in technology and design aimed at improving efficiency, reducing environmental impact, and meeting the increasing demands of modern air travel.
North America commanded the largest market share during the extrapolated period. With a vast and well-developed aviation industry, North America relies on apron buses to efficiently manage ground operations and passenger flow. These buses are instrumental in facilitating seamless connectivity between terminals and aircraft parked on aprons, particularly in instances where direct gate access is limited. The market witnesses continuous advancements, with a focus on technological innovation, environmental sustainability, and meeting rigorous standards of safety and performance.
Asia Pacific is expected to witness profitable growth over the projection period, owing to the robust growth and expansion of airports across the region. The increasing air travel demand, rapid urbanization, and economic development have led to a surge in airport infrastructure projects, driving the demand for efficient ground transportation solutions, including apron buses. Furthermore, countries like China and India, with their rapidly growing aviation sectors, are witnessing substantial investments in airport development, contributing significantly to the expansion of the apron buses market.
Key players in the market
Some of the key players in the Apron Buses Market include AB Volvo, BYD Company Ltd, Ashok Leyland, Cavotec SA, AMSS GSE, COBUS Industries GmbH, Proterra Inc., Aeromobiles, Textron GSE and Zhengzhou YuTong Bus.
In November 2023, Volvo Group, the leader in transport and infrastructure solutions and CRH, the global leader in building materials solutions, agree partnership to accelerate net-zero innovations in the design and deployment of on-road vehicles and off-road equipment used in construction with a focus on next generation technology deployment, scaling cutting-edge technology, and operational efficiency.
In November 2022, The Volvo Group and North American-based Pilot Company create partnership for the development of public, high-performing charging infrastructure for medium- and heavy-duty electric vehicles.