封面
市場調查報告書
商品編碼
2157120

美國金屬成型設備:市場佔有率分析、產業趨勢與統計、成長預測(2026-2031 年)

United States Metal Forming Equipment - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2026 - 2031)

出版日期: | 出版商: Mordor Intelligence | 英文 150 Pages | 商品交期: 2-3個工作天內

價格

※ 本網頁內容可能與最新版本有所差異。詳細情況請與我們聯繫。

簡介目錄

根據 Mordor Intelligence 預測,美國金屬成型設備市場規模預計將在 2025 年達到 28.3 億美元,2026 年達到 29.4 億美元,到 2031 年達到 34.5 億美元,2026 年至 2031 年的複合年成長率為 3.25%。

美國金屬成型設備市場-IMG1

美國金屬成型設備市場趨勢與分析

製造業回流與聯邦政府投資

根據「建設美國,購買美國貨」政策,所有聯邦政府資助的基礎設施項目所使用的鋼鐵製造流程都必須在美國境內完成,從而將聯邦政府資助的建築需求與經過認證的國內製造工廠聯繫起來。這項要求鼓勵企業購買壓平機、輥壓成型機、折彎機以及相關系統,以生產符合該政策要求的零件。回流舉措報告指出,到2025年,金屬加工回流率將成長19%,顯示越來越多的生產活動正在回歸美國製造地。報告也指出,因關稅而選擇回流的原因年增了12倍,顯示貿易狀況在位置決策中的作用日益增強。這些因素促使企業持續投資於沖壓生產線、鍛造機和輥壓成型系統,而不是短期更換生產基地。半導體投資項目已宣布超過6300億美元,涵蓋140個項目,這將增加對用於設施、資料中心和變電站的加工結構鋼和鋁材的需求。

電動車、電池和輕量化零件的製造

電動車 (EV) 需要專門設計的沖壓成型零件,用於電池整合、結構支撐和相關動力傳動系統改裝,這擴大了供應商必須成型的金屬零件範圍。鋁製電池機殼推動了對能夠加工輕質金屬板材並滿足生產和品質要求的設備的需求。諾貝麗斯 (Novelis) 指出,與同等鋼製解決方案相比,鋁製解決方案可將機殼的重量減輕高達 50%,因此材料重量成為設備選擇的核心因素。這項要求促使人們選擇相容鋁材的伺服壓力機、液壓成型設備以及配備相應控制系統、模具和成型功能的彎折壓床。國內對電池組件的採購要求正促使越來越多的此類工作轉向美國本地工廠,而非海外採購。此外,對鋁衍生性商品徵收的關稅進一步增強了在地採購成型鋁零件及相關組件系統的成本優勢。

高昂的資本投資成本和資金籌措困難。

購買新的成型設備需要大量的資本投入。對於缺乏與目的地設備製造商 (OEM) 簽訂長期供貨合約的小型加工商而言,這筆負擔尤其沉重,因為這些合約無法為資金籌措申請提供保障,也無法確保設備的可預測利用率。 2026 年出現的相反趨勢——訂單量下降而訂單價值上升——表明,自動化程度和先進控制功能的提升會推高新設備的購買成本。美國小規模企業管理局 (SBA) 的 504 計劃為合格的中小企業提供固定資產融資,包括滿足計劃要求的資本投資。但該計劃的核准流程可能會延遲與時間緊迫的合約相關的採購,這給那些希望快速回應新生產機會的加工商帶來了實際挑戰。 2023 年至 2025 年利率上升期間,設備升級決策被推遲,使得美國金屬成型設備市場更容易受到資金籌措環境的影響。雖然即時累計稅收支出可以降低購置成本,但這對於大規模沖壓生產線的投資可能效果不佳。

細分市場分析

到2025年,壓平機將占美國金屬成形設備市場規模的44%,這主要得益於用於大規模汽車沖壓加工、工業零件製造和通用金屬製品製造製程的機械和液壓系統。伺服壓力機是成長最快的細分市場,預計2026年至2031年的複合年成長率將達到5.3%。這主要歸功於可程式設計的滑動運動,使其能夠應用於電動車零件、航太零件和精密醫療成型等領域。一項於2026年針對一台25,000 kN大型伺服壓力機進行的研究發現,動態參數校準可將峰值扭力誤差降低72.7%。研究還發現,有效馬達扭矩的預測誤差從7.6%降低至1.4%,這支持了在需要高精度和高重複性的應用中採用伺服技術。液壓機在深拉延、橡膠墊成型和液壓成形等領域繼續發揮至關重要的作用,這些應用需要長行程範圍內的可控力。

機械壓力機在通用沖壓加工中仍然發揮著至關重要的作用,因為高生產速度仍然是其經濟效益的核心。彎折壓床和彎曲機是第二大設備類別,但隨著買家開始考慮能耗和生命週期成本,電動和伺服驅動型號的需求正在成長。輥壓成型設備用於建築和基礎設施項目,而鍛造設備則支援航太和國防領域對專用零件的應用。液壓成型機和擠壓機滿足了汽車結構件、航太管道和鋁製電池機殼框架等零件的精密加工需求。舒勒公司 (Schuler Inc.) 和費恩圖爾公司 (Feintool) 於 2026 年 1 月推出了新一代 HFA 精密沖裁機。這些沖裁機採用伺服控制液壓泵驅動裝置,具有更高的衝程速度,並且能源效率提高了兩位數。

到2025年,沖壓和沖孔將占美國金屬成型設備市場的32.5%,這反映了它們在汽車車身面板、電氣設備機殼、消費性電子元件和工業硬體等廣泛應用領域的應用。級進模壓機和傳送式壓力機生產線由​​於能夠生產大批量、高重複性的零件,因此非常適合這些應用。液壓成形是成長最快的加工領域,預計從2026年到2031年將以4.9%的複合年成長率成長。電動車平台和航太管系統需要無縫管狀或板材金屬形狀,而傳統模壓機無法穩定地提供這些形狀。彎曲工藝,包括彎折壓床和輥壓機,也受益於航太和國防領域對用於海軍艦艇和航太發射結構的大型壓平機的投資。

2026年5月,辛辛那提公司(Cincinnati, Inc.)為一項火箭研發專案交付了大型彎折壓床,顯示市場對大型結構件精密加工的需求十分旺盛。深拉延製程在消費性電子產品、醫療設備和航太燃料系統中繼續發揮至關重要的作用,因為這些領域的拉延深度、壁厚和表面光潔度都至關重要。鍛造業受益於國防採購,這些採購涉及航太和導彈項目所需的高可靠性鈦合金和鎳基高溫合金零件。軋製和輥壓成型過程為公路、橋樑和建築項目提供結構鋼和型材。電磁成形、橡膠墊成形和增量片狀成型等其他製程則用於小批量生產複雜的航太和國防原型,而數位孿生系統在熱沖壓認證中也日益重要。

其他好處:

  • Excel格式的市場預測(ME)表
  • 3個月的分析師支持

目錄

第1章:引言

  • 研究假設和市場定義
  • 調查範圍

第2章:調查方法

第3章執行摘要

第4章 市場狀況

  • 市場概覽
  • 市場促進因素
    • 製造業回流與聯邦政府投資
    • 電動車、電池和輕量化零件的製造
    • 工業4.0、自動化與勞動生產力挑戰
    • 擴大航太、國防和造船領域的生產能力。
    • 適用於需要快速換型的分散式生產的模塑單元。
    • 傳統印刷機和控制設備的數位化相容性
  • 市場限制因素
    • 高昂的資金成本和對資金籌措的敏感性
    • 熟練技術人員及控制工程師短缺
    • 進口零件的關稅風險和價格波動
    • 不同製造年份的工廠系統整合風險
  • 價值供應鏈分析
    • 鋼、鋁及特殊合金原料
    • 模具、工具、控制設備、伺服驅動器和感測器
    • 機械製造商、系統整合商、經銷商、服務供應商
    • 處理器、一級供應商和主要OEM買家
    • 售後配件、改裝、培訓和遠距離診斷。
  • 監理情勢
    • 職業安全和機器防護要求
    • 能源效率、排放​​和環境合規性
    • 「購買美國貨」規則:聯邦採購及強制使用國產商品
    • 貿易救濟措施、關稅和關稅分類
  • 技術展望
    • 伺服驅動和混合式印刷架構
    • 光纖雷射、CNC工具機和多軸成型技術的整合
    • 機器人技術、視覺檢測和模內感測
    • 數位孿生、預測性維護和遠端監控
    • 能量監測和再生驅動系統
  • 評估地緣政治事件對市場的影響

第5章 市場規模與成長預測

  • 依設備類型
    • 壓平機
      • 機械壓力機
      • 油壓機
      • 伺服壓力機
      • 其他通用印刷機
    • 彎折壓床和彎曲機
      • 液壓彎折壓床
      • 伺服/電動彎折壓床
      • 機械彎折壓床
      • 其他折彎機
    • 鍛造設備
      • 鍛壓機
      • 鍛造錘
      • 壓縮成型機和鐓頭機
      • 其他鍛造設備
    • 輥壓成型及板材/型材軋製設備
      • 輥壓成型機
      • 板材軋機
      • 結構鋼和型材軋機
      • 其他二次軋製成型設備
    • 線材/管材/型材設備
      • 線材/棒材拉拔/成型設備
      • 管材成型和彎曲設備
      • 型材機
    • 擠出機
    • 液壓成型設備
    • 其他金屬成型設備
  • 透過成型工藝
    • 壓制和沖壓
    • 深畫
    • 彎曲過程
    • 鍛造
    • 軋製和輥壓成型
    • 擠壓
    • 液壓成型
    • 其他成型工藝
  • 透過模壓材料
    • 碳鋼和低合金鋼
    • 不銹鋼
    • 鋁及鋁合金
    • 銅及銅合金
    • 鈦、鎳和其他非鐵金屬
    • 其他材料
  • 按最終用途行業分類
    • 汽車和運輸業
    • 航太/國防
    • 工業機械及資本財
    • 金屬製品及加工
    • 電氣和電子設備
    • 建築和基礎設施
    • 能源與電力
    • 家用電器耐用消費品
    • 醫療和精密製造
    • 其他終端用戶產業

第6章 競爭情勢

  • 市場集中度
  • 策略趨勢
  • 市佔率分析
  • 公司簡介
    • TRUMPF Inc.
    • AMADA AMERICA, INC.
    • Bystronic Inc.
    • Komatsu America Industries LLC
    • Schuler Inc.
    • Cincinnati Incorporated
    • Prima Power North America Inc.
    • Salvagnini America, Inc.
    • LVD Company NV
    • MC Machinery Systems, Inc.
    • Mazak Optonics Corporation
    • Mitsubishi Electric Automation, Inc.
    • Beckwood Press Company
    • Greenerd Press & Machine Company, Inc.
    • AIDA Engineering, Ltd.
    • Fagor Arrasate S. Coop.
    • Wilson Tool International
    • Piranha Fabrication Equipment
    • Accurpress
    • Ermak USA, Inc.
    • Haco-Atlantic, Inc.
    • Pacific Press Technologies
    • Wysong and Miles Company

第7章 市場機會與未來展望

簡介目錄
Product Code: 102680

According to Mordor Intelligence, the United States metal forming equipment market size is projected to be USD 2.83 billion in 2025, USD 2.94 billion in 2026, and reach USD 3.45 billion by 2031, growing at a CAGR of 3.25% from 2026 to 2031.

United States Metal Forming Equipment - Market - IMG1

United States Metal Forming Equipment Market Trends and Insights

Reshoring and Federal Manufacturing Investment

Build America, Buy America provisions require every iron and steel manufacturing process used for federally assisted infrastructure projects to occur within the United States, tying federally funded construction demand to qualified domestic fabrication facilities. This requirement supports purchases of presses, roll formers, bending machines, and related systems used by fabricators making compliant components. The Reshoring Initiative reported that fabricated metals reshoring grew 19% in 2025, indicating that more production activity was returning to United States manufacturing locations. It also recorded a 12-fold year-over-year rise in tariff-driven reshoring rationales, showing the growing role of trade conditions in location decisions. These conditions favor committed spending on stamping lines, forging presses, and roll-forming systems instead of short-term changes in where production is performed. Announced semiconductor investments exceeding USD 630 billion across 140 projects add fabrication work for structural steel and aluminum used in facility buildings, data centers, and power substations.

EV, Battery, and Lightweight-Component Manufacturing

Electric vehicles require purpose-designed stamped components for battery integration, structural support, and related powertrain changes, increasing the range of metal parts that suppliers must form. Aluminum battery enclosures increase demand for equipment that can process lightweight sheet materials while meeting production and quality requirements. Novelis states that aluminum solutions can reduce battery enclosure mass by up to 50% compared with equivalent steel solutions, which gives material weight a central role in equipment selection. This requirement favors aluminum-capable servo presses, hydroforming equipment, and CNC press brakes with suitable controls, tooling, and forming capability. Domestic-content requirements for battery components direct a greater share of this work toward United States plants rather than offshore supply arrangements. Tariffs on aluminum derivatives also reinforce the cost case for local sourcing of formed aluminum parts and related component systems.

High Capital Cost and Financing Sensitivity

New forming equipment requires substantial capital, particularly for smaller fabricators that lack long-term original equipment manufacturer supply agreements to support financing applications or secure predictable equipment use. The contrast between lower unit orders and higher order value in 2026 shows how automation content and advanced controls can raise the cost of a new equipment purchase. The Small Business Administration 504 program offers fixed-asset financing for eligible small businesses, including equipment investments that meet program requirements. Its approval process can slow purchases tied to time-sensitive contract awards, creating a practical challenge for fabricators seeking to respond quickly to new production opportunities. The 2023-2025 period of elevated interest rates delayed equipment replacement decisions and showed that the United States metal forming equipment market is sensitive to financing conditions. Tax expensing can ease acquisition costs, but larger press-line investments can exceed the range where those provisions provide the strongest support.

Other drivers and restraints analyzed in the detailed report include:

  1. Industry 4.0 Automation and Labor-Productivity Imperatives
  2. Aerospace, Defense, and Shipbuilding Capacity Expansion
  3. Skilled Technician and Controls-Engineer Shortages

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Press machines held 44% of the United States metal forming equipment market size in 2025, supported by mechanical and hydraulic systems used in high-volume automotive stamping, industrial component fabrication, and general metal-products operations. Servo presses are the fastest-growing subsegment, with a projected 5.3% CAGR from 2026 to 2031, because programmable slide motion supports electric vehicle components, aerospace parts, and precision medical forming applications. A 2026 study of a 25,000 kN heavy-duty servo press found that dynamics parameter calibration reduced peak torque error by 72.7%. The same study reduced effective motor torque prediction error from 7.6% to 1.4%, which supports the use of servo technology where precision and repeatable operation are required. Hydraulic presses remain important for deep drawing, rubber-pad forming, and hydroforming, where controlled force is needed over long stroke lengths.

Mechanical presses retain a role in commodity stamping because high production speed remains central to their economics. Press brakes and bending machines are the second-largest equipment category, while electric and servo variants gain interest as purchasers consider energy use and lifetime operating costs. Roll-forming equipment serves construction and infrastructure work, whereas forging equipment supports aerospace and defense applications requiring specialized parts. Hydroforming equipment and extrusion presses address adjacent precision requirements for automotive structures, aerospace ducts, and aluminum battery enclosure frames. Schuler Inc. and Feintool launched a new HFA fineblanking press generation during January 2026, with servo-controlled hydraulic pump drives, higher stroke rates, and double-digit energy-efficiency gains.

Stamping and punching held 32.5% of the United States metal forming equipment market size in 2025, reflecting their broad use across automotive body panels, electrical enclosures, appliance components, and industrial hardware. Progressive-die and transfer-press lines suit these applications because they can produce repeatable parts at high volumes. Hydroforming is the fastest-growing process segment, forecast to expand at a 4.9% CAGR from 2026 to 2031. Electric vehicle platforms and aerospace duct systems require seamless tubular or sheet-formed shapes that conventional die stamping cannot consistently provide. Bending, including press-brake and roll-bending work, also benefits from aerospace and defense investment in high-tonnage systems for naval vessels and space-launch structures.

Cincinnati Incorporated delivered large press brakes to rocket programs during May 2026, illustrating demand for precision fabrication of large structural components. Deep drawing remains important for consumer appliances, medical devices, and aerospace fuel systems, where draw depth, wall thickness, and surface finish matter. Forging benefits from the defense procurement of high-integrity titanium and nickel-superalloy parts used in aerospace and missile programs. Rolling and roll-forming processes provide structural steel and aluminum profiles for highway, bridge, and construction projects. Other processes, including electromagnetic forming, rubber-pad forming, and incremental sheet forming, have uses in low-volume, complex aerospace and defense prototypes, while digital-twin systems are becoming relevant in hot-stamping qualification.

Complete Report Scope:

  • By Equipment Type
    • Press Machines
      • Mechanical Presses
      • Hydraulic Presses
      • Servo Presses
      • Other General-Purpose Presses
    • Press Brakes and Bending Machines
      • Hydraulic Press Brakes
      • Servo / Electric Press Brakes
      • Mechanical Press Brakes
      • Other Bending Machines
    • Forging Equipment
      • Forging Presses
      • Forging Hammers
      • Upsetting and Heading Machines
      • Other Forging Equipment
    • Roll Forming and Plate/Profile Rolling Equipment
      • Roll Forming Machines
      • Plate Rolling Machines
      • Section and Profile Rolling Machines
      • Other Secondary Rolling/Forming Equipment
    • Wire, Tube and Profile Forming Equipment
      • Wire and Bar Drawing/Forming Equipment
      • Tube Forming and Bending Equipment
      • Profile Forming Equipment
    • Extrusion Presses
    • Hydroforming Equipment
    • Other Metal Forming Equipment
  • By Forming Process
    • Stamping and Punching
    • Deep Drawing
    • Bending
    • Forging
    • Rolling and Roll Forming
    • Extrusion
    • Hydroforming
    • Other Forming Processes
  • By Material Formed
    • Carbon and Low-Alloy Steel
    • Stainless Steel
    • Aluminum and Aluminum Alloys
    • Copper and Copper Alloys
    • Titanium, Nickel and Other Non-Ferrous Metals
    • Other Materials
  • By End-Use Industry
    • Automotive and Transportation
    • Aerospace and Defense
    • Industrial Machinery and Capital Equipment
    • Metal Products and Fabrication
    • Electrical and Electronics
    • Construction and Infrastructure
    • Energy and Power
    • Consumer Appliances and Durable Goods
    • Medical and Precision Manufacturing
    • Other End-Use Industries

List of Companies Covered in this Report:

  1. TRUMPF Inc.
  2. AMADA AMERICA, INC.
  3. Bystronic Inc.
  4. Komatsu America Industries LLC
  5. Schuler Inc.
  6. Cincinnati Incorporated
  7. Prima Power North America Inc.
  8. Salvagnini America, Inc.
  9. LVD Company NV
  10. MC Machinery Systems, Inc.
  11. Mazak Optonics Corporation
  12. Mitsubishi Electric Automation, Inc.
  13. Beckwood Press Company
  14. Greenerd Press & Machine Company, Inc.
  15. AIDA Engineering, Ltd.
  16. Fagor Arrasate S. Coop.
  17. Wilson Tool International
  18. Piranha Fabrication Equipment
  19. Accurpress
  20. Ermak USA, Inc.
  21. Haco-Atlantic, Inc.
  22. Pacific Press Technologies
  23. Wysong and Miles Company

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 Introduction

  • 1.1 Study Assumptions and Market Definition
  • 1.2 Scope of the Study

2 Research Methodology

3 Executive Summary

4 Market Landscape

  • 4.1 Market Overview
  • 4.2 Market Drivers
    • 4.2.1 Reshoring and Federal Manufacturing Investment
    • 4.2.2 EV, Battery and Lightweight-Component Manufacturing
    • 4.2.3 Industry 4.0 Automation and Labor-Productivity Imperatives
    • 4.2.4 Aerospace, Defense and Shipbuilding Capacity Expansion
    • 4.2.5 Distributed Production Requiring Fast-Changeover Forming Cells
    • 4.2.6 Digital Serviceability of Legacy Presses and Controls
  • 4.3 Market Restraints
    • 4.3.1 High Capital Cost and Financing Sensitivity
    • 4.3.2 Skilled Technician and Controls-Engineer Shortages
    • 4.3.3 Tariff Exposure and Imported Component Volatility
    • 4.3.4 Integration Risk Across Mixed-Vintage Factory Systems
  • 4.4 Value / Supply-Chain Analysis
    • 4.4.1 Steel, Aluminum and Specialty-Alloy Inputs
    • 4.4.2 Dies, Tooling, Controls, Servo Drives and Sensors
    • 4.4.3 Machine Builders, Integrators, Distributors and Service Providers
    • 4.4.4 Fabricators, Tier Suppliers and Large OEM Buyers
    • 4.4.5 Aftermarket Parts, Retrofits, Training and Remote Diagnostics
  • 4.5 Regulatory Landscape
    • 4.5.1 Occupational Safety and Machine Guarding Requirements
    • 4.5.2 Energy Efficiency, Emissions and Environmental Compliance
    • 4.5.3 Buy America, Federal Procurement and Domestic-Content Rules
    • 4.5.4 Trade Remedies, Tariffs and Customs Classification
  • 4.6 Technological Outlook
    • 4.6.1 Servo-Electric and Hybrid Press Architectures
    • 4.6.2 Fiber Laser, CNC and Multi-Axis Forming Integration
    • 4.6.3 Robotics, Vision Inspection and In-Die Sensing
    • 4.6.4 Digital Twins, Predictive Maintenance and Remote Monitoring
    • 4.6.5 Energy Monitoring and Regenerative Drives
  • 4.7 Impact Assessment of Geopolitical Events on the Market

5 Market Size & Growth Forecasts

  • 5.1 By Equipment Type
    • 5.1.1 Press Machines
      • 5.1.1.1 Mechanical Presses
      • 5.1.1.2 Hydraulic Presses
      • 5.1.1.3 Servo Presses
      • 5.1.1.4 Other General-Purpose Presses
    • 5.1.2 Press Brakes and Bending Machines
      • 5.1.2.1 Hydraulic Press Brakes
      • 5.1.2.2 Servo / Electric Press Brakes
      • 5.1.2.3 Mechanical Press Brakes
      • 5.1.2.4 Other Bending Machines
    • 5.1.3 Forging Equipment
      • 5.1.3.1 Forging Presses
      • 5.1.3.2 Forging Hammers
      • 5.1.3.3 Upsetting and Heading Machines
      • 5.1.3.4 Other Forging Equipment
    • 5.1.4 Roll Forming and Plate/Profile Rolling Equipment
      • 5.1.4.1 Roll Forming Machines
      • 5.1.4.2 Plate Rolling Machines
      • 5.1.4.3 Section and Profile Rolling Machines
      • 5.1.4.4 Other Secondary Rolling/Forming Equipment
    • 5.1.5 Wire, Tube and Profile Forming Equipment
      • 5.1.5.1 Wire and Bar Drawing/Forming Equipment
      • 5.1.5.2 Tube Forming and Bending Equipment
      • 5.1.5.3 Profile Forming Equipment
    • 5.1.6 Extrusion Presses
    • 5.1.7 Hydroforming Equipment
    • 5.1.8 Other Metal Forming Equipment
  • 5.2 By Forming Process
    • 5.2.1 Stamping and Punching
    • 5.2.2 Deep Drawing
    • 5.2.3 Bending
    • 5.2.4 Forging
    • 5.2.5 Rolling and Roll Forming
    • 5.2.6 Extrusion
    • 5.2.7 Hydroforming
    • 5.2.8 Other Forming Processes
  • 5.3 By Material Formed
    • 5.3.1 Carbon and Low-Alloy Steel
    • 5.3.2 Stainless Steel
    • 5.3.3 Aluminum and Aluminum Alloys
    • 5.3.4 Copper and Copper Alloys
    • 5.3.5 Titanium, Nickel and Other Non-Ferrous Metals
    • 5.3.6 Other Materials
  • 5.4 By End-Use Industry
    • 5.4.1 Automotive and Transportation
    • 5.4.2 Aerospace and Defense
    • 5.4.3 Industrial Machinery and Capital Equipment
    • 5.4.4 Metal Products and Fabrication
    • 5.4.5 Electrical and Electronics
    • 5.4.6 Construction and Infrastructure
    • 5.4.7 Energy and Power
    • 5.4.8 Consumer Appliances and Durable Goods
    • 5.4.9 Medical and Precision Manufacturing
    • 5.4.10 Other End-Use Industries

6 Competitive Landscape

  • 6.1 Market Concentration
  • 6.2 Strategic Moves
  • 6.3 Market Share Analysis
  • 6.4 Company Profiles (Includes Global Level Overview, Market Level Overview, Core Segments, Financials as Available, Strategic Information, Products and Services, Recent Developments)
    • 6.4.1 TRUMPF Inc.
    • 6.4.2 AMADA AMERICA, INC.
    • 6.4.3 Bystronic Inc.
    • 6.4.4 Komatsu America Industries LLC
    • 6.4.5 Schuler Inc.
    • 6.4.6 Cincinnati Incorporated
    • 6.4.7 Prima Power North America Inc.
    • 6.4.8 Salvagnini America, Inc.
    • 6.4.9 LVD Company NV
    • 6.4.10 MC Machinery Systems, Inc.
    • 6.4.11 Mazak Optonics Corporation
    • 6.4.12 Mitsubishi Electric Automation, Inc.
    • 6.4.13 Beckwood Press Company
    • 6.4.14 Greenerd Press & Machine Company, Inc.
    • 6.4.15 AIDA Engineering, Ltd.
    • 6.4.16 Fagor Arrasate S. Coop.
    • 6.4.17 Wilson Tool International
    • 6.4.18 Piranha Fabrication Equipment
    • 6.4.19 Accurpress
    • 6.4.20 Ermak USA, Inc.
    • 6.4.21 Haco-Atlantic, Inc.
    • 6.4.22 Pacific Press Technologies
    • 6.4.23 Wysong and Miles Company

7 Market Opportunities & Future Outlook

  • 7.1 White-Space and Unmet-Need Assessment
    • 7.1.1 Retrofit-First Automation for Small and Mid-Sized Fabricators
    • 7.1.2 Domestic Service and Spare-Parts Localization
    • 7.1.3 Low-Energy Forming for Electrified Production Lines
    • 7.1.4 Flexible Cells for High-Mix, Low-Volume Production
    • 7.1.5 Cybersecure Connectivity for Legacy Equipment