查看購物車
  • English
  • Japanese
封面
市場調查報告書
商品編碼
2124664

歐洲、中東和非洲的軟包裝：市場佔有率分析、行業趨勢和統計數據以及成長預測（2026-2031 年）

Europe, Middle East And Africa (EMEA) Flexible Packaging - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2026 - 2031)
出版日期: | 出版商: Mordor Intelligence | 英文 110 Pages | 商品交期: 2-3個工作天內

價格

※ 本網頁內容可能與最新版本有所差異。詳細情況請與我們聯繫。

簡介目錄

據 Mordor Intelligence 稱，歐洲、中東和非洲 (EMEA) 地區的軟包裝市場預計到 2026 年價值將達到 1,013.4 億美元，高於 2025 年的 977.7 億美元，預計到 2031 年將達到 1,212.2 億美元。

預計 2026 年至 2031 年的複合年成長率為 3.65%。

歐洲、中東和非洲 (EMEA) 軟性包裝市場-IMG1

本報告按材料（塑膠、紙張等）、產品類型（袋/包裝袋、薄膜/包裝膜等）、終端用戶行業（食品、飲料等）、印刷技術（柔版印刷、凹版印刷等）和地區（歐洲、中東和非洲）進行細分。市場預測以美元計價。

歐洲、中東和非洲（EMEA）軟包裝市場的趨勢和見解。

對加工食品和簡便食品的需求正在穩步成長。

隨著人口向都市區遷移，人們的飲食習慣也隨之改變，零售商和餐飲企業越來越傾向於選擇輕便、保存期限長的包裝，以便在漫長的分銷週期內保持食品新鮮。經濟實惠的包裝袋正在取代硬質包裝，從而降低運輸成本和二氧化碳排放。加工商正在採用“即取即走”的設計，例如ProAmpac的“RotiBag”，這種外帶包裝無需外包裝盒即可運送熱食。這些性能的提升，加上符合HACCP和ISO 22000標準，正在推動歐洲、中東和非洲地區（EMEA）軟包裝市場對薄膜基材和拉鍊封口件的基準需求不斷成長。

促進可回收和永續包裝的法規制定

歐盟《包裝及包裝廢棄物法規 (2025/40)》規定，到 2030 年，包裝材料中可回收成分必須達到 65%，並禁止使用含 PFAS 的阻隔化學品，這要求對傳統的多層複合材料進行全面重新設計。目前，研發中心正優先開發採用相容劑的單層 PE 或單層 PP 結構，這些相容劑能夠在維持氧氣和水蒸氣阻隔性的同時，實現機械回收。BASF的可堆肥塗層和 Sudpack 的化學回收聚醯胺層展示了創新如何與包裝廢棄物法規 (PPWR) 的里程碑目標相契合。品牌所有者正在根據歐盟層面的合規性對全球 SKU 進行標準化，這為生質塑膠供應商和纖維加工商提供了在歐洲、中東和非洲 (EMEA) 軟包裝市場擴大市場佔有率的新機會。

聚合物樹脂價格波動

原油價格波動和歐洲能源收費系統的上漲扭曲了聚乙烯（PE）和聚丙烯（PP）級原料的成本，迫使加工商每季與客戶重新談判合約。雖然垂直整合型企業透過多年期原物料採購合約來規避風險，但規模較小的企業卻面臨利潤率下降的困境，導致其在新壓平機和複捲機方面的資本投資減少。這減緩了設備更新換代週期，並延緩了歐洲、中東和非洲地區（EMEA）軟質包裝市場中對價格敏感的產業採用創新技術的進程。

細分市場分析

2025年，塑膠憑藉其成本優勢、高機械強度和成熟的供應鏈，在歐洲、中東和非洲（EMEA）地區的軟包裝市場中仍佔67.35%的佔有率。然而，更嚴格的法規以及品牌對可再生材料的承諾正在推動生質塑膠和可堆肥材料的成長，其複合年成長率（CAGR）將達到4.88%。歐盟資助的試點項目，例如AIMPLAS的「廢棄物衍生PHA」舉措，展現了製度支持，從而降低了規模化生產的風險。目前，加工商正在並行運作海藻衍生PHA或運作薄膜的擠出生產線，同時生產傳統的LDPE薄膜。這種「雙軌制」方法既能規避合規風險，又能支持早期採用者的品牌。預計到2031年，EMEA地區採用生物基材料的軟包裝市場規模將超過52.8億美元，供應鏈整合和消費者對可堆肥標誌認知度的提高將推動這一市場佔有率的顯著成長。

為防止性能下降，這種混合層壓材料採用了一層化學回收的PP和PET粘合層，不含任何原生材料，既滿足了再生材料含量的要求，又實現了更薄的壁厚。這項創新尤其及時，因為《塑膠廢棄物法規》(PPWR) 要求加工商透過歐盟認可的協議證明其產品的可回收性。這對塑膠產業的成熟企業而言是一項必須克服的合規障礙，否則將導致市場佔有率被新興的纖維素基卷材產品蠶食。

即使到了2025年，袋裝和軟包裝仍將佔據歐洲、中東和非洲地區（EMEA）軟包裝市場47.05%的佔有率，憑藉其在從穀物到清潔劑等廣泛應用領域的多功能性，鞏固了其市場地位。然而，小袋和條狀包裝正日益受到關注，這主要得益於單份咖啡、電解質粉和皮膚科乳霜等產品的需求成長，預計到2031年，其複合年成長率將達到4.43%。個人護理行業的跨國公司正在使用數位印刷的小袋，讓顧客可以在訂閱盒中試用香水和防曬霜，並利用動態圖形來促進社交媒體互動。這種包裝形式尤其適合空間寶貴的便利商店，因為它的材料用量低。在2025年國際軟包裝博覽會（IFFA 2025）上展出的可食用海藻酸鹽小袋，透過完全消除二次廢棄物，進一步拓展了其應用潛力。

消費者對精確份量控制和便利使用的需求，與各國營養標示法規鼓勵消費者避免過量食用的理念相契合。因此，歐洲、中東和非洲地區的軟包裝市場正在對泡沫填充封口 (FFS) 生產線進行重組，以適應更快的流水線計數器、微孔系統以及能夠承受分銷網路考驗的氣密邊緣密封。小袋包裝的普及也與藥品冷鏈要求密切相關，四面密封的鋁箔阻隔層可在區域間運輸過程中保護易吸濕的活性原料藥(API)。

其他好處：

  • Excel格式的市場預測（ME）表
  • 3個月的分析師支持

目錄

第1章：引言

  • 研究假設和市場定義
  • 調查範圍

第2章：調查方法

第3章執行摘要

第4章 市場狀況

  • 市場概覽
  • 市場促進因素
    • 對加工食品和簡便食品的需求正在穩步成長。
    • 監理機關努力推廣可回收和永續包裝
    • 減輕重量以降低物流成本
    • 歐洲、中東和非洲地區電子商務快速成長
    • 藥品冷鏈的擴展需要阻隔性層壓材料
    • 數位印刷技術能夠實現小批量生產和區域性SKU客製化。
  • 市場限制因素
    • 聚合物樹脂價格波動
    • 日益激烈的競爭給利潤率帶來了壓力。
    • 中東和非洲地區（MEA）的薄膜回收基礎設施不足。
    • 關於 PFAS 和礦物油過渡的新法規
  • 產業價值鏈分析
  • 監理情勢
  • 技術展望
  • 波特五力分析
  • 宏觀經濟因素對市場的影響

第5章 市場規模與成長預測

  • 材料
    • 塑膠
      • 聚乙烯（PE）
      • 雙軸延伸聚丙烯（BOPP）
      • 流延聚丙烯（CPP）
      • 其他塑膠
    • 紙
    • 金屬箔
    • 生質塑膠和可堆肥材料
  • 依產品類型
    • 袋子和小袋
    • 薄膜和包裝
    • 小包裝和條狀包裝
    • 其他產品類型
  • 按最終用戶行業分類
    • 食物
      • 烘焙點心
      • 小吃
      • 肉類、雞肉、魚貝類
      • 糖果糕餅
      • 寵物食品
      • 其他食物
    • 飲料
    • 醫療和藥品
    • 個人護理化妝品
    • 農業和園藝
    • 其他終端用戶產業
  • 透過印刷技術
    • 柔版印刷
    • 凹版印刷
    • 數位印刷
    • 其他印刷技術
  • 按地區
    • 歐洲
      • 英國
      • 德國
      • 法國
      • 義大利
      • 西班牙
      • 其他歐洲國家
    • 中東和非洲
      • 中東
        • 沙烏地阿拉伯
        • 阿拉伯聯合大公國
        • 土耳其
        • 其他中東國家
      • 非洲
        • 南非
        • 奈及利亞
        • 肯亞
        • 其他非洲國家

第6章 競爭情勢

  • 市場集中度
  • 策略趨勢
  • 市佔率分析
  • 公司簡介
    • Amcor plc
    • Constantia Flexibles Group GmbH
    • Mondi plc
    • Huhtamaki Oyj
    • ProAmpac Holdings Inc.
    • Bischof+Klein SE & Co. KG
    • Aluflexpack AG
    • Bak Ambalaj Sanayi ve Ticaret AS
    • Coveris Management GmbH
    • Danaflex OOO
    • Gualapack SpA
    • Wipak Oy
    • SUDPACK Holding GmbH & Co. KG
    • Schur Flexibles Holding Ges.mbH
    • ePac Holdings LLC
    • Treofan Germany GmbH & Co. KG
    • Cellografica Gerosa SpA
    • Flextrus AB

第7章 市場機會與未來展望

簡介目錄
Product Code: 72198

According to Mordor Intelligence, the Europe, Middle East and Africa (EMEA) flexible packaging market size in 2026 is estimated at USD 101.34 billion, growing from 2025 value of USD 97.77 billion with 2031 projections showing USD 121.22 billion, growing at 3.65% CAGR over 2026-2031.

Europe, Middle East And Africa (EMEA) Flexible Packaging - Market - IMG1

This report is Segmented by Material (Plastics, Paper, and More), Product Type (Bags and Pouches, Films and Wraps, and More), End-User Industry (Food, Beverage, and More), Printing Technology (Flexography, Rotogravure, and More), and Geography (Europe, Middle East and Africa). The Market Forecasts are Provided in Terms of Value (USD).

Europe, Middle East And Africa (EMEA) Flexible Packaging Market Trends and Insights

Steady Rise in Demand for Processed and Convenience Foods

Urban migration is reshaping meal habits, prompting retailers and foodservice operators to favor lightweight, shelf-stable packs that protect freshness during extended distribution cycles. Cost-effective bags and pouches displace rigid alternatives, lowering freight bills and CO2 footprints. Converters introduce grab-and-go designs such as ProAmpac's RotiBag, a leak-resistant format able to carry hot foods without outer cartons. Combined with HACCP and ISO 22000 compliance, these performance upgrades increase baseline volume for film substrates and zipper closures across the EMEA flexible packaging market.

Regulatory Push for Recyclable and Sustainable Packaging

The EU Packaging and Packaging Waste Regulation 2025/40 enforces 65% recyclable content by 2030 and bans PFAS barrier chemistries, triggering broad redesign of legacy multi-layer laminates. R&D centers now prioritize mono-PE or mono-PP structures with compatibilizers that preserve oxygen and moisture barrier while allowing mechanical recovery. BASF's compostable coatings and Sudpack's chemically recycled polyamide layers show how innovation is aligning with PPWR milestones. Brand owners standardize global SKUs around EU-level compliance, giving bioplastic suppliers and fiber-based converters new share-gain avenues in the EMEA flexible packaging market.

Volatility in Polymer Resin Prices

Crude-oil swings and Europe's higher energy tariff structure distort input costs for PE and PP grades, forcing converters to renegotiate customer contracts every quarter. Integrated players hedge exposure through multi-year feedstock deals, but small and mid-scale firms face margin erosion that curtails CapEx on new presses and rewinders. The net effect tempers replacement cycles and slows innovation adoption in price-sensitive portions of the EMEA flexible packaging market.

Other drivers and restraints analyzed in the detailed report include:

  1. Lightweighting for Logistics-Cost Reduction
  2. Rapid E-commerce Growth Across EMEA
  3. Intensifying Competitive Landscape Squeezing Margins

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Plastics retained 67.35% of the EMEA flexible packaging market share in 2025, anchored by cost advantages, high mechanical strength and well-established supply chains. Yet bioplastics and compostables are gaining ground-advancing at 4.88% CAGR-because regulatory stringency and brand commitments lean toward renewable content. EU-funded pilots, such as AIMPLAS' PHA-from-waste initiative, illustrate institutional support that de-risks scale-up. Converters now run parallel extrusion lines for seaweed, PHA or PLA films alongside traditional LDPE, a dual-track approach that hedges compliance risks while servicing early-adopter brands. The EMEA flexible packaging market size for bio-based substrates is set to breach the USD 5.28 billion mark by 2031, a material share jump underpinned by supply-chain co-location and rising consumer visibility of compostability logos.

To prevent performance compromises, hybrid laminates blend chemically recycled PP with virgin-free PET tie layers, hitting both recycled-content quotas and downgauge objectives. Such innovations are timely because the PPWR places the onus on converters to prove recyclability through EU-accepted protocols-a compliance ceiling that plastics incumbents must clear or surrender share to emerging cellulosic webs.

Bags and pouches still dominated 47.05% of the EMEA flexible packaging market size in 2025, a position grounded in versatility from cereals to detergents. Yet sachets and stick packs are enjoying headline-grabbing momentum with a 4.43% CAGR through 2031, driven by single-serve coffee, electrolyte powders and dermatology creams. Personal-care multinationals deploy digitally printed sachets to trial scents or SPF formulas in subscription boxes, harnessing variable graphics to spark social media engagement. The format's low-material footprint slots neatly into convenience stores where shelf space commands a premium. Edible alginate sachets displayed at IFFA 2025 push the envelope further by erasing secondary waste streams altogether.

Consumer demand for precise dosing and on-the-go use aligns with national nutrition labeling schemes that discourage oversized servings. Consequently, the EMEA flexible packaging market is retooling form-fill-seal lines for faster lane counters, micro-perforation systems and hermetic edge seals that withstand courier networks. Sachet adoption also dovetails with cold-chain pharmaceutical requirements, where foil-barrier four-side seals protect hygroscopic APIs during regional transport.

Complete Report Scope:

  • By Material
    • Plastics
      • Polyethylene (PE)
      • Biaxially Oriented Polypropylene (BOPP)
      • Cast Polypropylene (CPP)
      • Other Plastics
    • Paper
    • Metal Foil
    • Bioplastics and Compostable Materials
  • By Product Type
    • Bags and Pouches
    • Films and Wraps
    • Sachets and Stick Packs
    • Other Product Types
  • BY End-user Industry
    • Food
      • Baked Goods
      • Snacks
      • Meat, Poultry and Seafood
      • Confectionery
      • Pet Food
      • Other Food Products
    • Beverage
    • Healthcare and Pharmaceutical
    • Personal Care and Cosmetics
    • Agriculture and Horticulture
    • Other End-Use Industries
  • By Printing Technology
    • Flexography
    • Rotogravure
    • Digital Printing
    • Other Printing Technologies
  • By Geography
    • Europe
      • United Kingdom
      • Germany
      • France
      • Italy
      • Spain
      • Rest of Europe
    • Middle East and Africa
      • Middle East
        • Saudi Arabia
        • United Arab Emirates
        • Turkey
        • Rest of Middle East
      • Africa
        • South Africa
        • Nigeria
        • Kenya
        • Rest of Africa

List of Companies Covered in this Report:

  1. Amcor plc
  2. Constantia Flexibles Group GmbH
  3. Mondi plc
  4. Huhtamaki Oyj
  5. ProAmpac Holdings Inc.
  6. Bischof + Klein SE & Co. KG
  7. Aluflexpack AG
  8. Bak Ambalaj Sanayi ve Ticaret A.S.
  9. Coveris Management GmbH
  10. Danaflex OOO
  11. Gualapack S.p.A.
  12. Wipak Oy
  13. SUDPACK Holding GmbH & Co. KG
  14. Schur Flexibles Holding Ges.m.b.H.
  15. ePac Holdings LLC
  16. Treofan Germany GmbH & Co. KG
  17. Cellografica Gerosa S.p.A.
  18. Flextrus AB

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

  • 1.1 Study Assumptions and Market Definition
  • 1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET LANDSCAPE

  • 4.1 Market Overview
  • 4.2 Market Drivers
    • 4.2.1 Steady rise in demand for processed and convenience foods
    • 4.2.2 Regulatory push for recyclable and sustainable packaging
    • 4.2.3 Lightweighting for logistics cost reduction
    • 4.2.4 Rapid e-commerce growth across EMEA
    • 4.2.5 Expansion of pharma cold-chain requiring high-barrier laminates
    • 4.2.6 Digital printing enabling low-MOQ, localized SKUs
  • 4.3 Market Restraints
    • 4.3.1 Volatility in polymer resin prices
    • 4.3.2 Intensifying competitive landscape squeezing margins
    • 4.3.3 Inadequate film-recycling infrastructure in MEA
    • 4.3.4 Emerging PFAS and mineral-oil migration regulations
  • 4.4 Industry Value Chain Analysis
  • 4.5 Regulatory Landscape
  • 4.6 Technological Outlook
  • 4.7 Porter's Five Forces Analysis
    • 4.7.1 Threat of New Entrants
    • 4.7.2 Bargaining Power of Suppliers
    • 4.7.3 Bargaining Power of Buyers
    • 4.7.4 Threat of Substitutes
    • 4.7.5 Competitive Rivalry
  • 4.8 Impact of Macroeconomic Factors on the Market

5 MARKET SIZE AND GROWTH FORECASTS (VALUE)

  • 5.1 By Material
    • 5.1.1 Plastics
      • 5.1.1.1 Polyethylene (PE)
      • 5.1.1.2 Biaxially Oriented Polypropylene (BOPP)
      • 5.1.1.3 Cast Polypropylene (CPP)
      • 5.1.1.4 Other Plastics
    • 5.1.2 Paper
    • 5.1.3 Metal Foil
    • 5.1.4 Bioplastics and Compostable Materials
  • 5.2 By Product Type
    • 5.2.1 Bags and Pouches
    • 5.2.2 Films and Wraps
    • 5.2.3 Sachets and Stick Packs
    • 5.2.4 Other Product Types
  • 5.3 BY End-user Industry
    • 5.3.1 Food
      • 5.3.1.1 Baked Goods
      • 5.3.1.2 Snacks
      • 5.3.1.3 Meat, Poultry and Seafood
      • 5.3.1.4 Confectionery
      • 5.3.1.5 Pet Food
      • 5.3.1.6 Other Food Products
    • 5.3.2 Beverage
    • 5.3.3 Healthcare and Pharmaceutical
    • 5.3.4 Personal Care and Cosmetics
    • 5.3.5 Agriculture and Horticulture
    • 5.3.6 Other End-Use Industries
  • 5.4 By Printing Technology
    • 5.4.1 Flexography
    • 5.4.2 Rotogravure
    • 5.4.3 Digital Printing
    • 5.4.4 Other Printing Technologies
  • 5.5 By Geography
    • 5.5.1 Europe
      • 5.5.1.1 United Kingdom
      • 5.5.1.2 Germany
      • 5.5.1.3 France
      • 5.5.1.4 Italy
      • 5.5.1.5 Spain
      • 5.5.1.6 Rest of Europe
    • 5.5.2 Middle East and Africa
      • 5.5.2.1 Middle East
        • 5.5.2.1.1 Saudi Arabia
        • 5.5.2.1.2 United Arab Emirates
        • 5.5.2.1.3 Turkey
        • 5.5.2.1.4 Rest of Middle East
      • 5.5.2.2 Africa
        • 5.5.2.2.1 South Africa
        • 5.5.2.2.2 Nigeria
        • 5.5.2.2.3 Kenya
        • 5.5.2.2.4 Rest of Africa

6 COMPETITIVE LANDSCAPE

  • 6.1 Market Concentration
  • 6.2 Strategic Moves
  • 6.3 Market Share Analysis
  • 6.4 Company Profiles {(includes Global level Overview, Market level overview, Core Segments, Financials as available, Strategic Information, Market Rank/Share for key companies, Products and Services, and Recent Developments)}
    • 6.4.1 Amcor plc
    • 6.4.2 Constantia Flexibles Group GmbH
    • 6.4.3 Mondi plc
    • 6.4.4 Huhtamaki Oyj
    • 6.4.5 ProAmpac Holdings Inc.
    • 6.4.6 Bischof + Klein SE & Co. KG
    • 6.4.7 Aluflexpack AG
    • 6.4.8 Bak Ambalaj Sanayi ve Ticaret A.S.
    • 6.4.9 Coveris Management GmbH
    • 6.4.10 Danaflex OOO
    • 6.4.11 Gualapack S.p.A.
    • 6.4.12 Wipak Oy
    • 6.4.13 SUDPACK Holding GmbH & Co. KG
    • 6.4.14 Schur Flexibles Holding Ges.m.b.H.
    • 6.4.15 ePac Holdings LLC
    • 6.4.16 Treofan Germany GmbH & Co. KG
    • 6.4.17 Cellografica Gerosa S.p.A.
    • 6.4.18 Flextrus AB

7 MARKET OPPORTUNITIES AND FUTURE OUTLOOK

  • 7.1 White-space and Unmet-Need Assessment