全球輪胎邊緣鋼絲（輪胎輪胎邊緣鋼絲）市場規模（依產品類型、應用、區域範圍、預測）

輪胎邊緣鋼絲（輪胎輪胎邊緣鋼絲）市場規模及預測

2024 年胎圈鋼絲（輪胎輪胎邊緣鋼絲）市場規模為 12.5696 億美元，預計到 2032 年將達到 21.1805 億美元，2026 年至 2032 年的複合年成長率為 6.74%。

穩定的政府框架、強勁的購買力、龐大的國內市場以及持續的基礎設施推動了市場需求。全球輪胎輪胎邊緣鋼絲（ 輪胎邊緣 Wire）市場報告對市場進行了全面的評估，包括關鍵細分市場、趨勢、市場促進因素、限制因素、競爭格局以及影響市場的關鍵因素。

全球輪胎邊緣圈輪胎邊緣市場定義

胎輪胎邊緣鋼絲是一種表面鍍黃銅或青銅的碳鋼鋼絲。它強度高、柔韌性好、疲勞性能好、平直度好，且易於與橡膠黏合。它主要用作輪胎輪胎邊緣的增強材料。該產品可防止輪胎形狀因氣壓和其他外部因素而改變。輪胎邊緣與車輪接觸的部分稱為胎輪胎邊緣。越野車駕駛員經常會降低輪胎氣壓。

這會導致輪胎胎面加寬，從而增加胎面抓地力。如果胎壓過低，輪胎邊緣無法牢牢固定在車輪上，可能會輪胎邊緣。在這種情況下，通常會使用輪胎邊緣鎖將輪胎邊緣固定在車輪上。生鏽會導致輪胎邊緣在輪圈上，需要使用拆輪胎邊緣器。普通輪胎由許多不同的部件組成。胎輪胎邊緣被認為是輪胎最重要的部件之一。

車輛可以使用沒有胎面的充氣輪胎行駛，但如果沒有功能正常的胎輪胎邊緣，輪胎就無法正確固定在輪圈上，最終變得毫無用處。胎輪胎邊緣緊密貼合輪圈的內槽，形成密封，即使車輪或輪圈出現輕微刮痕，輪胎也能保持氣壓。所有輪胎，無論是無內胎輪胎或有內胎，都是如此。胎輪胎邊緣是輪胎的內圈，連接輪胎和輪輞，並支撐整個車輪。

胎輪胎邊緣由橡膠帶製成，並用鋼絲等耐用材料加固。輪胎輪胎邊緣使用的橡膠非常堅硬。因此，需要專用設備才能將輪胎正確地安裝在車輪或輪圈上。輪胎邊緣橡膠具有高摩擦力，能夠牢牢抓住輪圈的內外，防止輪胎在車輪旋轉時打滑。輪胎邊緣以充氣固定。輪胎有兩種類型：子午線輪胎和斜交輪胎。輪胎的分類是基於輪胎的結構和特性。

全球輪胎邊緣鋼絲（輪胎輪胎邊緣鋼絲）市場概況

穩定的政府框架、不斷成長的購買力、龐大的國內市場以及持續的基礎設施正在催生市場需求。輪胎平衡輪胎邊緣能夠經濟地平衡卡車和拖車所有車輪位置的整個車輪組件。輪胎輪胎邊緣能夠防止道路危險和輪胎內部堵塞，並保護環境免受鉛危害，因為它們不會像鉛塊那樣脫落。輪胎邊緣內的橡膠具有較高的摩擦點，並在內外輪圈上形成強大的抓地力，防止輪胎在車輪旋轉時打滑。空氣將輪胎邊緣固定指定。輪胎有兩種類型：子午線輪胎和斜交輪胎。

輪胎的分類是基於其結構和特性。大多數乘用車很少出現胎輪胎邊緣問題，除非安裝或拆卸輪胎。對於安裝在輪圈上的輪胎，水可能會滲入輪胎邊緣圈內的鋼絲繩，從而導致問題。有時，輪胎邊緣會黏在輪圈上，需要使用輪胎邊緣切割器才能正確拆卸輪胎。越野和攀岩是胎輪胎邊緣問題常見的運動。眾所周知，駕駛這些運動的車輛的駕駛員會降低胎壓以增加輪胎的接地面積。如果胎壓不足，輪胎邊緣可能會滑落並從輪圈凹槽中脫出。這被稱為「胎圈脫落」。

目錄

第1章 全球輪胎邊緣鋼絲（輪胎輪胎邊緣鋼絲）市場介紹

• 市場概覽
• 研究範圍
• 先決條件

第2章執行摘要

第3章：已驗證的市場研究調查方法

• 資料探勘
• 驗證
• 第一手資料
• 資料來源列表

第4章 全球輪胎邊緣鋼絲（輪胎輪胎邊緣鋼絲）市場展望

• 概述
• 市場動態
  • 驅動程式
  • 限制因素
  • 機會
• 波特五力模型
• 價值鏈分析

第5章 全球輪胎邊緣鋼絲（輪胎輪胎邊緣鋼絲）市場依產品類型

• 概述
• 0.78～1.60mm
• 1.60～1.83mm
• 1.83毫米或以上

第6章 全球輪胎邊緣鋼絲（輪胎輪胎邊緣鋼絲）市場應用

• 概述
• 子午線輪胎
• 斜交輪胎

第7章 全球輪胎邊緣鋼絲（輪胎輪胎邊緣鋼絲）市場（按地區）

• 概述
• 北美洲
  • 美國
  • 加拿大
  • 墨西哥
• 歐洲
  • 德國
  • 英國
  • 法國
  • 其他歐洲國家
• 亞太地區
  • 中國
  • 日本
  • 印度
  • 其他亞太地區
• 其他
  • 拉丁美洲
  • 中東和非洲

第8章全球輪胎邊緣圈鋼絲（輪胎輪胎邊緣鋼絲）市場競爭格局

• 概述
• 各公司市場排名
• 重點發展策略

第9章 公司簡介

• Bekaert
• Kiswire
• Rajratan
• Heico Wire Group
• TATA Steel
• WireCo WorldGroup
• Shandong Daye
• Xingda
• Snton
• Xinglun

第10章 附錄

• 相關調查

Bead Wire (Tyre Bead Wire) Market Size And Forecast

+Bead Wire (Tyre Bead Wire) Market size was valued at USD 1256.96 Million in 2024 and is projected to reach USD 2118.05 Million by 2032, growing at a CAGR of 6.74% from 2026 to 2032.

The market demand has been created by a stable government framework, greater purchasing power, a big domestic market, and ongoing infrastructural development. The Global Bead Wire (Tyre Bead Wire) Market report provides a holistic evaluation of the market. The report offers a comprehensive analysis of key segments, trends, drivers, restraints, competitive landscape, and factors that are playing a substantial role in the market.

Global Bead Wire (Tyre Bead Wire) Market Definition

Tyre bead wire is a high-carbon steel wire with brass or bronze plating on the surface. It has high strength, outstanding flexibility, superior fatigue properties, and great linearity, and can be easily adhered to rubber. It is mostly utilized as reinforcing materials in the tyre bead. This product keeps tyres from altering shape as a result of air pressure or other external influences. The edge of a tyre that sits on the wheel is referred to as a Tyre bead. It is usual for off-road vehicle drivers to lower the air pressure in their tyres.

As a result, the tire's tread spreads out, providing more surface area for the tread to grasp the terrain. If the pressure is too low, the bead may not be able to stay on the wheel, causing it to pop off; this is known as "losing a bead." In this situation, bead locks, which clamp the bead on the wheel, are frequently utilized. After rusting, the bead can become frozen to the rim, necessitating the employment of a bead breaker. The average tyre consists of a number of different components. The tyre bead is easily considered to be one of the most crucial components.

A vehicle can still travel on an inflated tyre without tread, but without a working tyre bead, the tyre would simply not stay tight on the rim, leaving it unusable. A tyre bead can stick firm to the inner groove of the rim and create a seal that allows a tyre to stay inflated even if the wheel or rim has minor damage. This is true for all tyres, whether they are tubeless or have inner tubes. The tyre bead is the tire's inner circle, the component that joins the tyre to the rim and holds the entire wheel together.

This bead is made up of a rubber band that has been strengthened with a durable substance like steel cable. The rubber compound utilized in tyre bead construction is extremely hard and rigid. As a result, special equipment is required to properly mount tyres onto a set of wheels or rims. The bead's rubber provides a high friction point and strong grip on the inner and outer rims, keeping the tyre from slipping when the wheel rolls. Inflation holds the bead in place. Radial tyres and bias-ply tyres are the two types of tyres available. The classifications are based on the construction and characteristics of the tyre.

Global Bead Wire (Tyre Bead Wire) Market Overview

The market demand has been created by a stable government framework, greater purchasing power, a big domestic market, and ongoing infrastructural development. Balancing the Tires Beads economically balance the entire wheel assembly in all-wheel positions on both the truck and the trailer. Tire beads are protected from road dangers and blockages inside the tyre, and they will not fall off like lead weights, preserving the environment from the hazards of lead. The bead's rubber provides a high friction point and strong grip on the inner and outer rims, keeping the tyre from slipping when the wheel rolls. Inflation holds the bead in place. Radial tyres and bias-ply tyres are the two types of tyres available.

The classifications are based on the construction and characteristics of the tyre. Except when mounting or removing a tyre, most passenger automobiles will rarely have problems with a tyre bead. Water can sometimes get into the steel cable within the bead, causing an issue with a tyre mounted on a rim. The bead can become attached to the rim, necessitating the use of a bead cutter to remove the tyre properly. Off-roading and rock crawling are the sports where most tyre bead troubles arise. The air pressure in tyres is known to be reduced by drivers of cars used for these sports in order to extend the footprint or contact area of the tyre. A bead might slip and detach from the groove in the rim if there isn't enough filled pressure. This is referred to as a "lost bead."

Global Bead Wire (Tyre Bead Wire) Market: Segmentation Analysis

The Global Bead Wire (Tyre Bead Wire) Market is Segmented on the basis of Product Type, Application And Geography.

Bead Wire (Tyre Bead Wire) Market, By Product Type

• 0.78~1.60 mm
• 1.65~1.83 mm
• Above 1.83 mm

Based on Product Type, The Market is bifurcated into 0.78~1.60 mm, 1.65~1.83 mm and Above 1.83 mm. During the forecast period, the 0.781.60 mm wire diameter Tyre Bead Wire segment is expected to account for the biggest sales volume share in 2017, this segment was forecasted to account for 83.88 percent volume share.

Bead Wire (Tyre Bead Wire) Market, By Application

• Radial Tire
• Bias Tire

Based on Application, The Market is bifurcated into Radial Tire and Bias Tire. In 2017, the Radial Tire segment was anticipated to have the biggest sales volume share of 86.70 percent, and by the end of 2025, it is expected to have a considerable market share.

Bead Wire (Tyre Bead Wire) Market, By Geography

• North America
• Europe
• Asia Pacific
• Rest of the world
• On the basis of Geography, The Global Bead Wire (Tyre Bead Wire) Market is classified into North America, Europe, Asia Pacific, and the Rest of the world. with a market share of almost 31.23 percent in 2016, China was the leading consumer of Tyre Bead Wire. In 2016, Europe was the second-largest consumer of Tyre Bead Wire.

Key Players

The "Global Bead Wire (Tyre Bead Wire) Market" study report will provide valuable insight with an emphasis on the global market. The major players in the market are Bekaert, Kiswire, Rajratan, Heico Wire Group, TATA Steel, WireCo WorldGroup, Shandong Daye, Xingda, Snton and Xinglun.

• The competitive landscape section also includes key development strategies, market share and market ranking analysis of the above-mentioned players globally.

TABLE OF CONTENTS

1 INTRODUCTION OF GLOBAL BEAD WIRE (TYRE BEAD WIRE) MARKET

• 1.1 Overview of the Market
• 1.2 Scope of Report
• 1.3 Assumptions

2 EXECUTIVE SUMMARY

3 RESEARCH METHODOLOGY OF VERIFIED MARKET RESEARCH

• 3.1 Data Mining
• 3.2 Validation
• 3.3 Primary Interviews
• 3.4 List of Data Sources

4 GLOBAL BEAD WIRE (TYRE BEAD WIRE) MARKET OUTLOOK

• 4.1 Overview
• 4.2 Market Dynamics
  • 4.2.1 Drivers
  • 4.2.2 Restraints
  • 4.2.3 Opportunities
• 4.3 Porters Five Force Model
• 4.4 Value Chain Analysis

5 GLOBAL BEAD WIRE (TYRE BEAD WIRE) MARKET, BY PRODUCT TYPE

• 5.1 Overview
• 5.2 0.78~1.60 mm
  • 5.31.65~1.83 mm
• 5.4 Above1.83 mm

6 GLOBAL BEAD WIRE (TYRE BEAD WIRE) MARKET, BY APPLICATION

• 6.1 Overview
• 6.2 Radial Tire
• 6.3 Bias Tire

7 GLOBAL BEAD WIRE (TYRE BEAD WIRE) MARKET, BY GEOGRAPHY

• 7.1 Overview
• 7.2 North America
  • 7.2.1 U.S.
  • 7.2.2 Canada
  • 7.2.3 Mexico
• 7.3 Europe
  • 7.3.1 Germany
  • 7.3.2 U.K.
  • 7.3.3 France
  • 7.3.4 Rest of Europe
• 7.4 Asia Pacific
  • 7.4.1 China
  • 7.4.2 Japan
  • 7.4.3 India
  • 7.4.4 Rest of Asia Pacific
• 7.5 Rest of the World
  • 7.5.1 Latin America
  • 7.5.2 Middle East and Africa

8 GLOBAL BEAD WIRE (TYRE BEAD WIRE) MARKET COMPETITIVE LANDSCAPE

• 8.1 Overview
• 8.2 Company Market Ranking
• 8.3 Key Development Strategies

9 COMPANY PROFILES

• 9.1 Bekaert
  • 9.1.1 Overview
  • 9.1.2 Financial Performance
  • 9.1.3 Product Outlook
  • 9.1.4 Key Developments
• 9.2 Kiswire
  • 9.2.1 Overview
  • 9.2.2 Financial Performance
  • 9.2.3 Product Outlook
  • 9.2.4 Key Developments
• 9.3 Rajratan
  • 9.3.1 Overview
  • 9.3.2 Financial Performance
  • 9.3.3 Product Outlook
  • 9.3.4 Key Developments
• 9.4 Heico Wire Group
  • 9.4.1 Overview
  • 9.4.2 Financial Performance
  • 9.4.3 Product Outlook
  • 9.4.4 Key Developments
• 9.5 TATA Steel
  • 9.5.1 Overview
  • 9.5.2 Financial Performance
  • 9.5.3 Product Outlook
  • 9.5.4 Key Developments
• 9.6 WireCo WorldGroup
  • 9.6.1 Overview
  • 9.6.2 Financial Performance
  • 9.6.3 Product Outlook
  • 9.6.4 Key Developments
• 9.7 Shandong Daye
  • 9.7.1 Overview
  • 9.7.2 Financial Performance
  • 9.7.3 Product Outlook
  • 9.7.4 Key Development
• 9.8 Xingda
  • 9.8.1 Overview
  • 9.8.2 Financial Performance
  • 9.8.3 Product Outlook
  • 9.8.4 Key Developments
• 9.9 Snton
  • 9.9.1 Overview
  • 9.9.2 Financial Performance
  • 9.9.3 Product Outlook
  • 9.9.4 Key Developments
• 9.10 Xinglun
  • 9.10.1 Overview
  • 9.10.2 Financial Performance
  • 9.10.3 Product Outlook
  • 9.10.4 Key Development

10 Appendix

• 10.1 Related Research