市場調查報告書
商品編碼
1134397
增材製造 (AM) 後處理:市場分析和預測Post-Processing for Additive Manufacturing: Market Analysis and Forecast |
隨著材料和打印技術的改進,即使採用增材製造 (AM) 的當前成本和技術,新應用也觸手可及。推動這一過程的因素之一是支持各種打印方法的後處理技術的成熟度。到目前為止,AM 僅佔整個終端產品製造市場的一小部分,但其份額仍在繼續增長。
幾乎所有 3D 打印作業都需要一定程度的後處理來去除支撐物、多餘的粉末或底層硬化。然而,該行業正在發展針對 AM 零件已知缺點的特定打印操作,例如表面粗糙度和材料性能。
本報告分析了全球增材製造 (AM) 後處理市場(清潔、著色、表面處理、固化、熱處理等),發現 3D 打印是一個重要但被忽視的後處理市場。我們調查如何強調,市場的主要機遇和挑戰,行業的基本結構,整體市場規模和增長率的趨勢展望,以及主要公司的概況。
This report provides the reader with a detailed understanding of the changing market dynamics that are causing additional emphasis of these operational steps, a review of the top suppliers of post-processing equipment and services, and a series of market forecasts examining year over year trends and industry breakdowns. The report is authored by Mike Vasquez, PhD, founder of noted industry consultancy 3Degrees.
The report also details the roles and requirements for 3D printing post-processing, a critical yet often overlooked part of the overall additive manufacturing workflow. The term encompasses a broad set of operations after any part comes out of the printer. This can include cleaning, coloring, surface finishing, curing, heat treating, and other manufacturing operations.
As materials and printing technologies have improved, new applications are within reach of the current cost and technical capabilities of additive manufacturing. One element that has helped to move this process along is the maturation of post-processing technologies for a variety of Additive Manufacturing printing modalities. For now, AM represents a small portion of the overall end-product manufacturing market, but that portion is growing.
In nearly all 3D-printing operations some amount of post processing is required to remove supports, excess powder, or basic curing. However, the industry has seen the evolution of printing-specific operations that target known shortcomings of AM parts, like surface roughness or material performance.
This report surveys the major companies providing services and products to directly target the post-processing operations involved in additive manufacturing, including but not limited to: AM-FLOW, AMT, DyeMansion, PostProcess, Solukon, Bel Air Finishing, Gasbarre, Hiperbaric, and MicroTek Finishing.