工業靜態設備：市場佔有率分析、產業趨勢與統計、成長預測（2026-2031）

據 Mordor Intelligence 稱，2025 年工業靜態設備市場價值為 1,796 億美元，預計到 2031 年將達到 2,323 億美元，而 2026 年為 1,874.7 億美元，預測期（2026-2031 年）複合年成長率為 4.38%。

本報告按設備類型（閥門、爐/鍋爐、熱交換器及其他）、結構材料（碳鋼、不銹鋼、合金鋼、非鐵金屬/複合材料）、額定壓力（低壓、中壓、高壓）、終端用戶行業（石油天然氣、發電、水處理及污水處理及其他）和地區進行細分。市場預測以美元計價。

全球工業靜態設備市場趨勢與洞察

新興經濟體的快速工業化

2024年，中國製造業產值年增6.2%，印度工業產值也較去年同期成長5.8%。這分別加速了石化聯合企業、鋼鐵廠和可再生氫能中心的建設，而這些項目都需要閥門、壓力容器和熱交換器。一些海灣國家也在氫能大型企劃上投資超過200億美元，推動了高壓靜態設備的初期需求。在這些經濟體中，新建項目的需求遠高於分階段升級改造，因此訂單大規模，涵蓋多種類型的設備，從而提振了工業靜態設備市場。在政府主導的產業待開發區和外商直接投資（FDI）計畫的推動下，產能將在預測期內持續擴張，預計市場需求將保持強勁。

上游油氣產業和液化天然氣基礎設施的擴張

受卡達、美國和澳洲計畫的推動，全球液化天然氣產能將在2024年增至每年4,200萬噸。這些項目需要低溫閥門和客製化熱交換器。上游資本投資已恢復至5,250億美元，為與長前置作業時間海上平台、天然氣收集系統和天然氣處理廠相關的設備訂單奠定了持續的基礎。在酸性氣體、高溫和海底設備領域經驗豐富的供應商已獲得優先供應商地位，從而在長達數十年的專案生命週期內確保了其持續的收入。

高昂的資本成本以及向可再生能源發電的轉變

到2024年，可再生能源將佔全球新增發電裝置容量的85%，這將抑制與石化燃料資產相關的鍋爐和爐膛的訂單。同時，利率上升提高了高資本投入型固定設備組的損益平衡點，這類設備的單價通常超過5,000萬美元。由於投資人更青睞低碳或高柔軟性資產，傳統火力發電發電工程正在被推遲，大直徑容器和高容量餘熱回收系統的短期累積訂單也在減少。

細分市場分析

閥門在工業靜態設備市場中佔據最大佔有率，預計到2025年將佔銷售額的32.86%，這主要歸功於其在所有製程中廣泛用於切斷、調節和安全功能。由於閥門更換週期相對較短（5-7年）且單一工廠內安裝的閥門數量眾多，預計其銷量將保持高位。熱交換器雖然目前市場佔有率仍然較小，但其在工業靜態設備市場中的佔有率正在迅速成長。強制性的效率維修正推動熱交換器銷售在2031年之前以5.65%的複合年成長率成長。製造商正在透過整合感測器和防污塗層來提高運轉率和能源回收。

即使燃煤發電廠逐步淘汰，來自垃圾焚化發電和區域供熱項目的爐窯和鍋爐訂單仍保持穩定。壓力容器的產量雖然較小，但由於其客製化設計、嚴格遵守標準以及長達18個月的生產週期，價格卻更高。數位化整合如今已無所不在。智慧閥門可以即時傳輸閥桿摩擦和閥座完整性數據，熱交換器陣列可以即時傳輸結垢係數，從而實現預測性維護策略，降低營運成本。

碳鋼仍將是一種經濟實惠的主力材料，預計到2025年將佔銷售額的37.40%，滿足供水、暖通空調和中溫加工生產線等常見應用的需求。然而，隨著煉油廠、石化裂解裝置和聯合循環發電廠的溫度和壓力不斷升高，對合金鋼的需求也不斷成長，該細分市場的複合年成長率（CAGR）達到5.78%。營運商越來越關注整個生命週期的成本，他們認知到使用性能更優的合金可以減少非計劃性停機時間和腐蝕相關故障。因此，他們可以減少與關鍵路徑停機相關的保固索賠和保險費用。

不銹鋼佔據著平衡的中間位置，在食品、飲料和製藥等對產品純度要求極高的行業中備受青睞。非鐵金屬和複合材料則佔據著小眾但不斷成長的市場。例如，儘管鈦製熱交換器的價格比不銹鋼熱交換器高出八倍，但它仍然是沿海地區冷卻水應用的首選。用於大氣儲槽的複合材料外殼在腐蝕性化學品儲存領域也越來越受歡迎，凸顯了材料創新對於拓展供應商產品系列的重要性。

區域分析

亞太地區受惠於煉油廠擴建、煤製化工項目以及政府主導的基礎設施走廊等一系列幾乎不間斷的項目，預計到2025年將佔全球銷售額的42.10%。隨著石化生產、鋼鐵生產和電網級倉儲設施的運作，中國和印度的工業靜態設備市場持續成長。日本和韓國對符合嚴格品質標準的精密合金熱交換器和特殊閥門的訂單龐大，利潤豐厚；而隨著製造地南移，東南亞國家對主流碳鋼設備的需求也不斷增加。

北美是第二大市場，頁岩氣開發有顯著進展以及石化原料整合得到有效支撐。美國液化天然氣出口能力位居世界第一，由此催生了對低溫壓力容器和三偏心閥的需求。同時，加拿大油砂業者正在維修高溫熱交換器以降低排放強度。受近岸外包的推動，墨西哥加工出口工廠的擴張帶動了對中碳鋼容器的需求。區域脫碳法規進一步刺激了先進餘熱回收蒸汽產生器和低氮氧化物製程加熱器的銷售。

在歐洲，旨在提高效率和更換報廢設備的訂單成熟且穩定。儘管由於新建石化燃料發電廠持續短缺，工業靜態設備的市場佔有率成長緩慢，但資金卻流入了氫能先導計畫、電池製造設施和區域供熱的擴建領域。在德國的工業叢集中，用於溶劑回收系統的合金熱交換器正被優先考慮；而在斯堪地那維亞的紙漿和造紙廠，複合材料蒸煮器正被採用以減少腐蝕。東歐受益於歐盟支持的現代化資金，刺激了新興化工中心對認證壓力容器和不銹鋼衛生級閥門的需求。

其他好處

• Excel格式的市場預測（ME）表
• 3個月的分析師支持

目錄

第1章：引言

• 研究假設和市場定義
• 調查範圍

第2章：調查方法

第3章執行摘要

第4章 市場狀況

• 市場概覽
• 市場促進因素
  • 新興經濟體的快速工業化
  • 上游油氣產業和液化天然氣基礎設施的擴張
  • 化工和石化領域的產能提升
  • 透過更嚴格的排放氣體法規，促進熱交換系統的維修。
  • 高壓設備的氫基經濟維修
  • 透過引入數位孿生技術實現預測性維護
• 市場限制因素
  • 高昂的資本成本以及向可再生能源發電的轉變
  • 特殊鋼和合金的價格波動
  • 稀有材料供應鏈中斷
  • 缺乏ASME認證的熟練製造技術人員
• 工業生態系分析
• 監管情勢和標準
• 技術趨勢（邊緣運算和人工智慧分析）
• 波特五力分析

第5章 市場規模與成長預測

• 依設備類型
  • 閥門
    • 閘閥、截止閥、止回閥
    • 球閥
    • 蝶閥
    • 塞閥
    • 洩壓閥
  • 熔爐和鍋爐
  • 熱交換器
  • 壓力容器
• 透過結構材料
  • 碳鋼
  • 防鏽的
  • 合金鋼
  • 非鐵金屬/複合材料
• 額定壓力
  • 低壓（低於 300 psi）
  • 中等壓力（300-900 psi）
  • 高壓（超過 900 psi）
• 按最終用戶行業分類
  • 石油和天然氣
  • 發電
  • 化工/石油化工
  • 水和污水處理
  • 採礦和金屬
  • 飲食
  • 其他
• 按地區
  • 北美洲
    • 美國
    • 加拿大
    • 墨西哥
  • 歐洲
    • 德國
    • 英國
    • 法國
    • 俄羅斯
    • 其他歐洲國家
  • 亞太地區
    • 中國
    • 日本
    • 印度
    • 韓國
    • 澳洲
    • 其他亞太國家
  • 中東和非洲
    • 中東
      • 沙烏地阿拉伯
      • 阿拉伯聯合大公國
      • 其他中東國家
    • 非洲
      • 南非
      • 埃及
      • 其他非洲國家
  • 南美洲
    • 巴西
    • 阿根廷
    • 南美洲其他地區

第6章 競爭情勢

• 市場集中度
• 策略趨勢
• 市佔率分析
• 公司簡介
  • Flowserve Corporation
  • Emerson Electric Co.
  • Alfa Laval AB
  • Danfoss A/S
  • Mitsubishi Heavy Industries, Ltd.
  • KSB SE & Co. KGaA
  • Velan Inc.
  • Wartsila Oyj Abp
  • Johnson Controls International plc
  • Xylem Inc.
  • SPX FLOW, Inc.
  • L&T Valves Limited
  • Paul Mueller Company
  • Kelvion Holding GmbH
  • Hamon & Cie（International）SA
  • Nippon Steel Engineering Co., Ltd.
  • Doosan Mecatec Co., Ltd.
  • IHI Power Systems Co., Ltd.
  • Hitachi Zosen Corporation
  • CIMC Enric Holdings Ltd.

第7章 市場機會與未來展望

According to Mordor Intelligence, the industrial static equipment market size was valued at USD 179.6 billion in 2025 and estimated to grow from USD 187.47 billion in 2026 to reach USD 232.3 billion by 2031, at a CAGR of 4.38% during the forecast period (2026-2031).

This report is Segmented by Equipment Type (Valves, Furnaces/Boilers, Heat Exchangers, and More), Material of Construction (Carbon Steel, Stainless Steel, Alloy Steel, and Non-Ferrous and Composites), Pressure Rating (Low, Medium, and High), End-User Industry (Oil and Gas, Power Generation, Water and Wastewater, and More), and Geography. The Market Forecasts are Provided in Terms of Value (USD).

Global Industrial Static Equipment Market Trends and Insights

Rapid Industrialization Across Emerging Economies

Manufacturing output in China climbed 6.2% during 2024 while India's industrial production grew 5.8% year-over-year, accelerating build-outs of petrochemical complexes, steel plants, and renewable hydrogen hubs that each need valves, pressure vessels, and heat exchangers. Several Gulf nations also committed more than USD 20 billion to hydrogen megaprojects, driving initial demand for high-pressure static assets. These economies frequently require entire greenfield installations rather than incremental replacements, resulting in large multi-equipment orders that lift the industrial static equipment market. Government-backed industrial corridors and foreign direct investment programs ensure capacity additions extend well into the forecast window, maintaining a positive demand trajectory.

Expansion of Upstream Oil and Gas and LNG Infrastructure

Global LNG liquefaction capacity additions totaled 42 million tpa in 2024, supported by projects in Qatar, the United States, and Australia that mandate cryogenic valves and custom heat exchangers. Upstream capital expenditure rebounded to USD 525 billion, setting the stage for sustained equipment orders tied to long-lead offshore platforms, gathering systems, and gas-processing plants. Suppliers with proven sour-gas, high-temperature, and subsea qualifications gain preferred-vendor status, reinforcing recurring revenue across multi-decade project lifecycles.

High Capital Cost and Shift Toward Renewable Generation

Renewables accounted for 85% of global new-build power capacity in 2024, suppressing boiler and furnace orders tied to fossil assets. Simultaneously, elevated interest rates raise hurdle rates for cap-ex-heavy static equipment packages that routinely eclipse USD 50 million per installation. Investors prefer low-carbon or flexible assets, delaying traditional thermal projects and trimming near-term order books for large-diameter vessels and high-capacity heat-recovery systems.

Other drivers and restraints analyzed in the detailed report include:

1. Capacity Additions in Chemicals and Petrochemicals
2. Stricter Emission Norms Driving Heat-Transfer Retrofits
3. Volatile Prices of Special-Grade Steel and Alloys

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Valves generated the largest portion of the industrial static equipment market size, contributing 32.86% of 2025 revenue as their omnipresence spans isolation, regulation, and safety functions across every process. Their relatively short five-to-seven-year replacement cycles and multiplicity within a single plant drive high unit volumes. The industrial static equipment market share for heat exchangers, though smaller, is rising swiftly; mandated efficiency retrofits lift exchanger sales at a 5.65% CAGR through 2031. Manufacturers are embedding sensors and antifouling coatings to boost uptime and energy recovery.

Furnaces and boilers continue to register dependable orders from waste-to-energy and district-heating projects, even as coal retirements continue. Pressure vessels, while low in volume, command premium prices owing to custom engineering, stringent code compliance, and extended fabrication schedules that stretch up to 18 months. Digital integration is now ubiquitous: smart valves relay stem friction and seating integrity, while exchanger arrays transmit fouling coefficients in real time, enabling predictive maintenance strategies that shrink operating expenditure.

Carbon steel remained the cost-effective workhorse with 37.40% revenue share in 2025, meeting general service needs in water, HVAC, and moderate-temperature processing lines. Alloy steel, however, is gaining traction as refineries, petrochemical crackers, and combined-cycle plants push temperatures and pressures higher, giving the segment a 5.78% CAGR. Operators increasingly weigh total lifecycle expense, recognizing that superior alloys can cut unscheduled downtime and reduce corrosion-related failures, thereby trimming warranty claims and insurance premiums linked to critical-path outages.

Stainless steel occupies a balanced middle ground, prized in food, beverage, and pharmaceuticals, where product purity is paramount. Non-ferrous and composite materials claim a niche yet expanding foothold; titanium heat exchangers, for example, are preferred in coastal cooling-water service despite prices up to eight times higher than stainless alternatives. Composite shells for atmospheric tanks are also seeing uptake in corrosive chemical storage, underscoring material innovation's role in broadening supplier portfolios.

Complete Report Scope:

• By Equipment Type
  • Valves
    • Gate, Globe and Check
    • Ball Valves
    • Butterfly Valves
    • Plug Valves
    • Pressure-relief Valves
  • Furnaces / Boilers
  • Heat Exchangers
  • Pressure Vessels
• By Material of Construction
  • Carbon Steel
  • Stainless Steel
  • Alloy Steel
  • Non-ferrous and Composites
• By Pressure Rating
  • Low (< 300 psi)
  • Medium (300-900 psi)
  • High (> 900 psi)
• By End-user Industry
  • Oil and Gas
  • Power Generation
  • Chemicals and Petrochemicals
  • Water and Wastewater
  • Mining and Metals
  • Food and Beverages
  • Other End-user Industry
• By Geography
  • North America
    • United States
    • Canada
    • Mexico
  • Europe
    • Germany
    • United Kingdom
    • France
    • Russia
    • Rest of Europe
  • Asia-Pacific
    • China
    • Japan
    • India
    • South Korea
    • Australia
    • Rest of Asia-Pacific
  • Middle East and Africa
    • Middle East
      • Saudi Arabia
      • United Arab Emirates
      • Rest of Middle East
    • Africa
      • South Africa
      • Egypt
      • Rest of Africa
  • South America
    • Brazil
    • Argentina
    • Rest of South America

Geography Analysis

Asia-Pacific retained 42.10% of global revenue in 2025, underpinned by a near-constant pipeline of refinery expansions, coal-to-chemicals plants, and state-backed infrastructure corridors. The industrial static equipment market size across China and India continues its upward trajectory as petrochemical output, steel production, and grid-scale storage facilities come online. Japan and South Korea contribute high-margin orders for precision alloy exchangers and specialty valves that meet stringent quality norms, while Southeast Asian nations absorb mainstream carbon-steel equipment as manufacturing shifts southward.

North America ranks next, anchored by shale gas development and a pronounced push toward petrochemical feedstock integration. The United States leads in LNG export capacity, necessitating cryogenic pressure vessels and triple-offset valves, whereas Canada's oil-sands operators retrofit high-temperature exchangers to lower emissions intensity. Mexican maquiladora plants, expanding under nearshoring moves, bolster medium-pressure carbon-steel vessel demand. Regional decarbonization rules further stimulate sales of advanced heat-recovery steam generators and low-NOx process heaters.

Europe exhibits mature yet stable orders geared toward efficiency upgrades and end-of-life replacements. Industrial static equipment market share growth is modest as new fossil plants remain scarce; instead, capital flows into hydrogen pilot projects, battery manufacturing facilities, and district heating expansions. German industrial clusters prioritize alloy exchangers for solvent recovery systems, while Scandinavian pulp and paper mills adopt composite digesters to mitigate corrosion. Eastern Europe benefits from EU-supported modernization funds, stimulating demand for code-stamped pressure vessels and stainless-steel sanitary valves in emerging chemical hubs.

1. Flowserve Corporation
2. Emerson Electric Co.
3. Alfa Laval A B
4. Danfoss A/S
5. Mitsubishi Heavy Industries, Ltd.
6. KSB SE & Co. KGaA
7. Velan Inc.
8. Wartsila Oyj Abp
9. Johnson Controls International plc
10. Xylem Inc.
11. SPX FLOW, Inc.
12. L&T Valves Limited
13. Paul Mueller Company
14. Kelvion Holding GmbH
15. Hamon & Cie (International) S.A.
16. Nippon Steel Engineering Co., Ltd.
17. Doosan Mecatec Co., Ltd.
18. IHI Power Systems Co., Ltd.
19. Hitachi Zosen Corporation
20. CIMC Enric Holdings Ltd.

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 INTRODUCTION

• 1.1 Study Assumptions and Market Definition
• 1.2 Scope of the Study

2 RESEARCH METHODOLOGY

3 EXECUTIVE SUMMARY

4 MARKET LANDSCAPE

• 4.1 Market Overview
• 4.2 Market Drivers
  • 4.2.1 Rapid industrialization across emerging economies
  • 4.2.2 Expansion of upstream oil and gas and LNG infrastructure
  • 4.2.3 Capacity additions in chemicals and petrochemicals
  • 4.2.4 Stricter emission norms driving heat-transfer retrofits
  • 4.2.5 Hydrogen economy retrofits for high-pressure equipment
  • 4.2.6 Digital-twin adoption enabling predictive maintenance
• 4.3 Market Restraints
  • 4.3.1 High capital cost and shift toward renewable generation
  • 4.3.2 Volatile prices of special-grade steel and alloys
  • 4.3.3 Supply-chain disruptions for exotic materials
  • 4.3.4 Shortage of ASME-certified skilled fabricators
• 4.4 Industry Ecosystem Analysis
• 4.5 Regulatory Landscape and Standards
• 4.6 Technological Outlook (Edge and AI analytics)
• 4.7 Porter's Five Forces Analysis
  • 4.7.1 Bargaining Power of Suppliers
  • 4.7.2 Bargaining Power of Buyers
  • 4.7.3 Threat of New Entrants
  • 4.7.4 Threat of Substitutes
  • 4.7.5 Competitive Rivalry

5 MARKET SIZE AND GROWTH FORECASTS (VALUE)

• 5.1 By Equipment Type
  • 5.1.1 Valves
    • 5.1.1.1 Gate, Globe and Check
    • 5.1.1.2 Ball Valves
    • 5.1.1.3 Butterfly Valves
    • 5.1.1.4 Plug Valves
    • 5.1.1.5 Pressure-relief Valves
  • 5.1.2 Furnaces / Boilers
  • 5.1.3 Heat Exchangers
  • 5.1.4 Pressure Vessels
• 5.2 By Material of Construction
  • 5.2.1 Carbon Steel
  • 5.2.2 Stainless Steel
  • 5.2.3 Alloy Steel
  • 5.2.4 Non-ferrous and Composites
• 5.3 By Pressure Rating
  • 5.3.1 Low (< 300 psi)
  • 5.3.2 Medium (300-900 psi)
  • 5.3.3 High (> 900 psi)
• 5.4 By End-user Industry
  • 5.4.1 Oil and Gas
  • 5.4.2 Power Generation
  • 5.4.3 Chemicals and Petrochemicals
  • 5.4.4 Water and Wastewater
  • 5.4.5 Mining and Metals
  • 5.4.6 Food and Beverages
  • 5.4.7 Other End-user Industry
• 5.5 By Geography
  • 5.5.1 North America
    • 5.5.1.1 United States
    • 5.5.1.2 Canada
    • 5.5.1.3 Mexico
  • 5.5.2 Europe
    • 5.5.2.1 Germany
    • 5.5.2.2 United Kingdom
    • 5.5.2.3 France
    • 5.5.2.4 Russia
    • 5.5.2.5 Rest of Europe
  • 5.5.3 Asia-Pacific
    • 5.5.3.1 China
    • 5.5.3.2 Japan
    • 5.5.3.3 India
    • 5.5.3.4 South Korea
    • 5.5.3.5 Australia
    • 5.5.3.6 Rest of Asia-Pacific
  • 5.5.4 Middle East and Africa
    • 5.5.4.1 Middle East
      • 5.5.4.1.1 Saudi Arabia
      • 5.5.4.1.2 United Arab Emirates
      • 5.5.4.1.3 Rest of Middle East
    • 5.5.4.2 Africa
      • 5.5.4.2.1 South Africa
      • 5.5.4.2.2 Egypt
      • 5.5.4.2.3 Rest of Africa
  • 5.5.5 South America
    • 5.5.5.1 Brazil
    • 5.5.5.2 Argentina
    • 5.5.5.3 Rest of South America

6 COMPETITIVE LANDSCAPE

• 6.1 Market Concentration
• 6.2 Strategic Moves
• 6.3 Market Share Analysis
• 6.4 Company Profiles {(includes Global level Overview, Market level overview, Core Segments, Financials as available, Strategic Information, Market Rank/Share for key companies, Products and Services, and Recent Developments)}
  • 6.4.1 Flowserve Corporation
  • 6.4.2 Emerson Electric Co.
  • 6.4.3 Alfa Laval A B
  • 6.4.4 Danfoss A/S
  • 6.4.5 Mitsubishi Heavy Industries, Ltd.
  • 6.4.6 KSB SE & Co. KGaA
  • 6.4.7 Velan Inc.
  • 6.4.8 Wartsila Oyj Abp
  • 6.4.9 Johnson Controls International plc
  • 6.4.10 Xylem Inc.
  • 6.4.11 SPX FLOW, Inc.
  • 6.4.12 L&T Valves Limited
  • 6.4.13 Paul Mueller Company
  • 6.4.14 Kelvion Holding GmbH
  • 6.4.15 Hamon & Cie (International) S.A.
  • 6.4.16 Nippon Steel Engineering Co., Ltd.
  • 6.4.17 Doosan Mecatec Co., Ltd.
  • 6.4.18 IHI Power Systems Co., Ltd.
  • 6.4.19 Hitachi Zosen Corporation
  • 6.4.20 CIMC Enric Holdings Ltd.

7 MARKET OPPORTUNITIES AND FUTURE OUTLOOK

• 7.1 White-space and Unmet-need Assessment