封面
市場調查報告書
商品編碼
2119644

印度炭黑:市場佔有率分析、產業趨勢與統計及成長預測(2026-2031)

India Carbon Black - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2026 - 2031)

出版日期: | 出版商: Mordor Intelligence | 英文 80 Pages | 商品交期: 2-3個工作天內

價格

本網頁內容可能與最新版本有所差異。詳細情況請與我們聯繫。

簡介目錄

據 Mordor Intelligence 稱,印度炭黑市場預計到 2026 年價值 21.1 億美元,高於 2025 年的 19.8 億美元,預計到 2031 年將達到 29.4 億美元。

預計從 2026 年到 2031 年,其複合年成長率將達到 6.79%。

印度炭黑市場-IMG1

本報告依製造程序(爐法製黑、氣法制黑、燈法製黑、熱法制黑)及應用領域(輪胎及工業橡膠製品、塑膠、墨粉及印刷油墨、塗料、紡織品等)進行細分。市場預測以美元計價。

印度炭黑市場趨勢及洞察。

乘用車和商用車用子午線輪胎的產量正在激增。

汽車製造商持續推進卡車和客車平台從斜交胎結構向子午線胎結構的轉變,這增加了每條輪胎所需的增強填料用量。由於貨運利用率的提高以及「印度公路網計畫」(Bharatmala Project)下高速公路建設帶來的交貨時間縮短,輪胎更換週期保持穩定。泰米爾納德邦和古吉拉突邦的輪胎工廠正以高產運轉率輪班運轉,並與國內炭黑供應商維持採購協議。胎體增強材料需求的成長導致平均炭黑填料用量比以往設計高出20%。因此,炭黑需求成長速度超過了輪胎產量成長速度,無論新車銷售量如何波動,需求前景依然穩定。

特種炭黑和導電炭黑的廣泛應用

高品質導電且耐紫外線的炭黑價格是普通爐燒炭黑的兩到三倍。 Birla Carbon 的「Continua」材料和 PCBL 的表面改質產品線清晰地表明,電池電極和高光澤聚合物領域正朝著低灰分、細顆粒產品的方向發展。印度生產商透過投資研發和應用實驗室,確保了長期供應合約的簽訂,以滿足下游用戶對複合材料的需求。這些高等級炭黑提高了利潤率,並使其利潤免受原料價格波動的影響。這一趨勢正在推動專門用於電池、電纜和高性能塑膠的生產能力,從而使收入來源擺脫對輪胎的依賴。

石油焦和煤焦油瀝青的價格波動很大。

由於原物料成本約佔現金成本的三分之二,煉油廠停產和運費上漲會迅速擠壓利潤空間。東方碳素化工2024會計年度的運轉率徘徊在70%左右,因為價格上漲無法跟上成本上漲的腳步。由於避險選擇有限,生產商被迫尋求與印度石油天然氣公司(ONGC)等煉油廠簽訂長期供應合約。雖然綜合餘熱回收在一定程度上緩解了能源價格波動的影響,但小型工廠仍然容易受到影響。

細分市場分析

到2025年,爐法炭黑將佔據印度炭黑市場80.78%的佔有率。這主要歸功於其大規模生產的最低單位成本。儘管氣法炭黑目前仍屬於小眾市場,但由於其優異的導電性(電池電極和抗靜電聚合物所需的導電性),預計其複合年成長率將達到8.12%。隨著PCBL和Epsilon Carbon在古吉拉突邦和卡納塔克邦運作反應器,爐法炭黑在印度炭黑市場的絕對佔有率預計將進一步擴大。雖然環保措施的投資需要大量資金用於建設新的爐法生產設施,但規模經濟效應使其與燈法和熱法相比仍保持競爭力。

氣黑的成長並非源自於產量優勢,而是源自於對特殊應用的需求。生產商正致力於在下游混煉廠的同一廠址建立小規模生產設施,以抵消高昂的加工成本。熱黑仍主要應用於超高純度應用領域,而燈黑則供應傳統油墨市場。隨著原始設備製造商 (OEM) 對導電性和純度規格的要求日益嚴格,擁有先進製程控制技術的供應商正獲得更高的溢價,從而推高了印度炭黑市場的平均噸價。

其他好處:

  • Excel格式的市場預測(ME)表
  • 3個月的分析師支持

目錄

第1章:引言

  • 研究假設和市場定義
  • 調查範圍

第2章:調查方法

第3章執行摘要

第4章 市場狀況

  • 市場概覽
  • 市場促進因素
    • 乘用車和商用車用子午線輪胎的產量正在激增。
    • 特種炭黑和導電炭黑的廣泛應用
    • 印度鋰離子電池生產快速擴張
    • 國內基礎設施建設熱潮推高了對管道和電纜的需求。
    • OEM廠商擴大在高階應用中採用顏色較深、抗紫外線的塑膠。
  • 市場限制因素
    • 石油焦和煤焦油瀝青的價格波動
    • 炭黑反應器的嚴格監管標準
    • 豪華汽車製造商對二氧化矽環保輪胎的需求日益成長。
  • 價值鏈分析
  • 波特五力模型

第5章 市場規模與成長預測

  • 依工藝類型
    • 爐黑
    • 煤炭黑
    • 燈黑
    • 熱黑
  • 透過使用
    • 輪胎和工業橡膠製品
    • 塑膠
    • 碳粉和列印油墨
    • 塗層
    • 纖維
    • 其他

第6章 競爭情勢

  • 市場集中度
  • 策略趨勢
  • 市佔率和排名分析
  • 公司簡介
    • Birla Carbon(Aditya Birla Group)
    • BKT Carbon
    • Cabot Corporation(Cabot India Ltd)
    • Continental Carbon India Ltd(Continental Carbon Asia)
    • Epsilon Carbon Pvt Ltd
    • Himadri Speciality Chemical Ltd
    • Jiangxi Black Cat Carbon Black Co. Ltd
    • OCI Company Ltd
    • Orion Engineered Carbons SA
    • PCBL Limited
    • Tokai Carbon Co. Ltd

第7章 市場機會與未來展望

簡介目錄
Product Code: 50000809

According to Mordor Intelligence, India carbon black market size in 2026 is estimated at USD 2.11 billion, growing from 2025 value of USD 1.98 billion with 2031 projections showing USD 2.94 billion, growing at 6.79% CAGR over 2026-2031.

India Carbon Black - Market - IMG1

This report is Segmented by Process Type (Furnace Black, Gas Black, Lamp Black, and Thermal Black), and Application (Tire and Industrial Rubber Product, Plastic, Toner and Printing Ink, Coating, Textile Fiber, and Others). The Market Forecasts are Provided in Terms of Value (USD).

India Carbon Black Market Trends and Insights

Surging Radial-Tire Production for Passenger and Commercial Vehicles

Vehicle makers continue to convert truck and bus platforms from bias-ply to radial construction, which requires more reinforcing filler per unit. Replacement cycles remain steady because freight utilization is rising, and highways under Bharatmala have shortened delivery times. Tire plants in Tamil Nadu and Gujarat run high-utilization shifts, sustaining offtake commitments with domestic carbon black suppliers. Higher belt-reinforcement needs raise average carbon black loading by up to 20% over legacy designs. As a result, carbon black demand grows faster than tire unit output, providing volume visibility irrespective of new-vehicle sales variation.

Growing Penetration of Specialty and Conductive Carbon Blacks

Premium conductive and UV-stable grades command two-to-three-times the price of commodity furnace blacks. Birla Carbon's Continua material and PCBL's surface-modified lines illustrate the technical shift toward low-ash, narrow-distribution products for battery electrodes and high-gloss polymers. Indian producers investing in research and development and application labs secure long-term supply contracts because downstream users require formulation support. These grades raise margins and buffer earnings against feedstock swings. The trend encourages capacity earmarked specifically for batteries, cables, and high-performance plastics, diversifying revenue beyond tires.

Volatile Petroleum-Coke and Coal-Tar Pitch Prices

Feedstock accounts for roughly two-thirds of cash cost, so refinery shutdowns and freight spikes compress margins quickly. Oriental Carbon & Chemicals operated near 70% utilization in FY 2024 because price pass-through lagged cost inflation. Hedging is limited, pushing producers to seek long-term supply agreements with refiners such as ONGC. Integrated waste-heat recovery partly cushions energy swings, yet smaller plants lacking scale remain vulnerable.

Other drivers and restraints analyzed in the detailed report include:

  1. Rapid Ramp-up of Lithium-ion Battery Cell Manufacturing
  2. Domestic Infrastructure Boom Boosting Pipe and Cable Applications
  3. Stringent Regulatory Norms for Carbon-Black Furnaces

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Furnace black held 80.78% of the India carbon black market share in 2025 because it offers the lowest unit cost for large-run production. While niche, gas black posts the fastest 8.12% CAGR because of superior conductivity sought in battery electrodes and antistatic polymers. The India carbon black market size contribution from furnace lines is set to expand in absolute terms as PCBL and Epsilon Carbon commission additional reactors in Gujarat and Karnataka. Environmental investments make new furnace capacity capital-intensive, yet scale economies maintain competitiveness over lamp or thermal processes.

Gas black's growth is rooted in specialty demand rather than volume leadership. Producers target modest capacities co-located with downstream compounders to offset higher conversion costs. Thermal black remains a micro-segment for ultra-pure applications, while lamp black serves legacy ink markets. As OEMs tighten conductivity and purity specs, suppliers upgrading process control capture premium pricing, lifting average realization per ton across the India carbon black market.

Complete Report Scope:

  • By Process Type
    • Furnace Black
    • Gas Black
    • Lamp Black
    • Thermal Black
  • By Application
    • Tire and Industrial Rubber Product
    • Plastic
    • Toner and Printing Ink
    • Coating
    • Textile Fiber
    • Others

List of Companies Covered in this Report:

  1. Birla Carbon (Aditya Birla Group)
  2. BKT Carbon
  3. Cabot Corporation (Cabot India Ltd)
  4. Continental Carbon India Ltd (Continental Carbon Asia)
  5. Epsilon Carbon Pvt Ltd
  6. Himadri Speciality Chemical Ltd
  7. Jiangxi Black Cat Carbon Black Co. Ltd
  8. OCI Company Ltd
  9. Orion Engineered Carbons S.A.
  10. PCBL Limited
  11. Tokai Carbon Co. Ltd

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 Introduction

  • 1.1 Study Assumptions and Market Definition
  • 1.2 Scope of the Study

2 Research Methodology

3 Executive Summary

4 Market Landscape

  • 4.1 Market Overview
  • 4.2 Market Drivers
    • 4.2.1 Surging radial-tire production for the passenger and commercial vehicle segments
    • 4.2.2 Growing penetration of specialty and conductive carbon blacks
    • 4.2.3 Rapid ramp-up of lithium-ion battery cell manufacturing in India
    • 4.2.4 Domestic infrastructure boom boosting pipe and cable applications
    • 4.2.5 OEM pushes for darker, UV-stable plastics for high-end applications
  • 4.3 Market Restraints
    • 4.3.1 Volatile petroleum-coke and coal-tar pitch prices
    • 4.3.2 Stringent regulatory norms for carbon-black furnaces
    • 4.3.3 Rising traction of silica-based green tyres among premium OEMs
  • 4.4 Value Chain Analysis
  • 4.5 Porter's Five Forces
    • 4.5.1 Bargaining Power of Suppliers
    • 4.5.2 Bargaining Power of Buyers
    • 4.5.3 Threat of New Entrants
    • 4.5.4 Threat of Substitutes
    • 4.5.5 Degree of Competition

5 Market Size and Growth Forecasts (Value)

  • 5.1 By Process Type
    • 5.1.1 Furnace Black
    • 5.1.2 Gas Black
    • 5.1.3 Lamp Black
    • 5.1.4 Thermal Black
  • 5.2 By Application
    • 5.2.1 Tire and Industrial Rubber Product
    • 5.2.2 Plastic
    • 5.2.3 Toner and Printing Ink
    • 5.2.4 Coating
    • 5.2.5 Textile Fiber
    • 5.2.6 Others

6 Competitive Landscape

  • 6.1 Market Concentration
  • 6.2 Strategic Moves
  • 6.3 Market Share(%)/Ranking Analysis
  • 6.4 Company Profiles (includes Global level Overview, Market level overview, Core Segments, Financials as available, Strategic Information, Market Rank/Share for key companies, Products and Services, and Recent Developments)
    • 6.4.1 Birla Carbon (Aditya Birla Group)
    • 6.4.2 BKT Carbon
    • 6.4.3 Cabot Corporation (Cabot India Ltd)
    • 6.4.4 Continental Carbon India Ltd (Continental Carbon Asia)
    • 6.4.5 Epsilon Carbon Pvt Ltd
    • 6.4.6 Himadri Speciality Chemical Ltd
    • 6.4.7 Jiangxi Black Cat Carbon Black Co. Ltd
    • 6.4.8 OCI Company Ltd
    • 6.4.9 Orion Engineered Carbons S.A.
    • 6.4.10 PCBL Limited
    • 6.4.11 Tokai Carbon Co. Ltd

7 Market Opportunities and Future Outlook

  • 7.1 White-space and unmet-need assessment