市場調查報告書
商品編碼
1390484
熱流道市場:2023-2028 年全球產業趨勢、佔有率、規模、成長、機會與預測Hot Runner Market: Global Industry Trends, Share, Size, Growth, Opportunity and Forecast 2023-2028 |
2022年全球熱流道市場規模達36億美元。展望未來, IMARC Group預計到2028年市場規模將達到55億美元,2022-2028年複合年成長率(CAGR)為7.32%。
熱流道是一種工業進料裝置,用於將熔融塑膠輸送到模具型腔中,以製造各種塑膠製品。它由噴嘴、歧管板、流量控制系統和熱閥組成。使用歧管系統對板進行加熱,使材料保持熔融狀態,直到流入模具型腔。熱流道通常有閥式澆口和開放式澆口兩種形式。與傳統使用的冷流道系統相比,熱流道可防止材料凝固,從而減少循環時間、塑膠廢物的產生,並顯著減少最終產品光滑所需的修整。因此,它們在各行業中得到了廣泛的應用,包括汽車、建築、電子、醫療和包裝。
全球快速工業化是推動市場成長的關鍵因素之一。此外,汽車和醫療保健產業對注塑塑膠產品的需求不斷成長,也推動了市場的成長。例如,汽車製造商廣泛使用射出成型的外部、內部、照明和引擎蓋下部件來組裝輕型車輛,以最小化碳排放並提高能源效率。此外,各種技術進步,例如連接設備與物聯網(IoT)和智慧感測器的整合,也是其他成長誘導因素。這些創新技術有助於即時收集和分析有關塑膠成型過程的資料,這也有助於減少製造缺陷和錯誤的機會。其他因素,包括工業 4.0 的出現,以及促進使用輕質塑膠成型系統的有利政府政策的實施,預計將推動市場成長。
The global hot runner market size reached US$ 3.6 Billion in 2022. Looking forward, IMARC Group expects the market to reach US$ 5.5 Billion by 2028, exhibiting a growth rate (CAGR) of 7.32% during 2022-2028.
Hot runner is an industrial feed device used for transferring molten plastic into the mold tool cavities for the manufacturing of various plastic products. It consists of nozzles, manifold plates, flow control systems and hot valves. The plates are heated using the manifold system to keep the material in a molten state until it flows into the mold cavity. Hot runners are commonly available in valve gate and open gate variants. In comparison to the traditionally used cold runner systems, hot runners prevent the material from solidifying, thereby reducing the cycle time, generation of plastic waste and significantly minimizing the trimming required to smoothen the final product. As a result, they find extensive applications across various industries, including automotive, construction, electronics, medical and packaging.
Rapid industrialization across the globe is one of the key factors driving the growth of the market. Moreover, the increasing requirement for injection-molded plastic products in the automotive and healthcare industries is providing a thrust to the market growth. For instance, automotive manufactures are widely using injection-molded exterior, interior, lighting and under hood components for the assembly of lightweight vehicles with minimal carbon emissions and enhanced energy efficiency. Additionally, various technological advancements, such as the integration of connected devices with the Internet of Things (IoT) and smart sensors, are acting as other growth-inducing factors. These innovative technologies aid in real-time collection and analysis of data regarding the plastic molding process, which also aids in reducing the chances of manufacturing defects and errors. Other factors, including the advent of Industry 4.0, along with the implementation of favorable government policies promoting the use of lightweight plastic molding systems, are anticipated to drive the market toward growth.
IMARC Group provides an analysis of the key trends in each sub-segment of the global hot runner market report, along with forecasts at the global, regional and country level from 2023-2028. Our report has categorized the market based on gate type, product type and end use industry.
Valve Gate Hot Runner
Open Gate Hot Runner
Insulated Runner
Heated Runner
Automotive
Electronic
Medical
Packaging
Others
North America
United States
Canada
Asia-Pacific
China
Japan
India
South Korea
Australia
Indonesia
Others
Europe
Germany
France
United Kingdom
Italy
Spain
Russia
Others
Latin America
Brazil
Mexico
Others
Middle East and Africa
The competitive landscape of the industry has also been examined along with the profiles of the key players being Barnes Group Inc., CACO PACIFIC Corporation, EWIKON HeiBkanalsysteme GmbH, Fast Heat UK Limited, FISA Corporation, GUNTHER Heisskanaltechnik GmbH, Husky Injection Molding Systems Ltd., INCOE Corporation, Inglass S.p.A (OC Oerlikon Management AG), Milacron Holdings Corp. (Hillenbrand Inc.), Seiki Corporation and Yudo Co. Ltd.