![]() |
市場調查報告書
商品編碼
2127921
飛機支柱市場規模、佔有率、成長、全球產業分析、區域趨勢及2026年至2034年預測。Aircraft Strut Market Size, Share, Growth, Global Industry Analysis, Regional Insights and Forecast to 2026-2034 |
||||||
全球飛機支柱市場預計到2025年將達到51.2億美元,並從2026年的54.7億美元成長到2034年的92.6億美元,預測期內複合年成長率(CAGR)為6.80%。北美將在2025年佔飛機支柱市場最大的佔有率,達到38.30%,這主要得益於其強勁的民航機生產、國防現代化項目以及成熟的航太製造生態系統。
飛機支柱是至關重要的結構部件,其設計目的是承受壓縮和拉伸載荷,同時支撐機翼、機身結構和起落架組件。這些部件能夠提高結構完整性,降低彎曲應力,並增強飛機的耐久性。現代飛機擴大採用鈦合金和先進複合材料等輕量材料,以提高燃油效率並降低維護成本。飛機產量的不斷成長、機隊的現代化以及對先進航太技術日益成長的投資,持續推動民用、軍用和通用航空領域對高性能飛機支柱的強勁需求。
市場促進因素
民用和軍用飛機產量的擴張是飛機支柱市場的主要驅動力之一。飛機製造商正在加快生產以滿足不斷成長的客運量和大量積壓訂單的需求,這直接推動了對起落架和結構支柱系統的需求。
此外,老舊機隊需要定期檢查、大修和更換起落架支柱、密封件和液壓系統,這為售後市場創造了巨大的商機。全球國防費用的成長和軍用飛機機隊的現代化也推動了市場的持續成長。
市場限制因素
高昂的製造成本和維護成本仍然是市場擴張面臨的主要挑戰。飛機支柱需要精密鍛造、高強度航太級材料、特殊塗層和嚴格的認證流程,這些都會顯著增加生產成本。
此外,飛機在其整個生命週期內的定期維護,包括液壓系統的檢查和維修以及關鍵部件的更換,增加了航空公司和飛機運營商的運營成本,阻礙了先進技術的快速採用。
市場機遇
輕量化材料和智慧飛機技術的日益普及創造了巨大的成長機會。製造商正擴大整合嵌入式感測器,以即時監控壓力、負載和溫度,從而實現預測性維護並減少意外設備故障。
鈦合金、碳複合材料和先進鋁材料的廣泛應用也有助於減輕飛機重量、提高耐腐蝕性和燃油效率,使這些技術對未來的飛機平台極具吸引力。
市場趨勢
影響飛機支柱市場的最重要趨勢之一是積層製造和近淨成形鍛造技術的應用。這些製造技術減少了原料浪費,提高了生產效率,並能夠設計出結構性能更優的複雜零件。
此外,製造商正在大力投資輕質複合複合材料結構和數位化製造技術,以提高產品質量,同時縮短生產前置作業時間並降低生命週期成本。
按類型分類,起落架支柱預計將成為市場成長的主要驅動力,到2026年將佔46.77%的市場佔有率,這主要歸功於其在起飛和著陸過程中吸收衝擊的關鍵作用。支撐支柱和輔助支柱預計將實現最快成長,這主要得益於其在輕型飛機、無人機和新興電動垂直起降(eVTOL)平台上的應用日益廣泛。
按作業系統分類,液壓支柱預計到2026年將佔最大的市場佔有率,達到32.95%,這得益於其卓越的阻尼性能、可靠性以及在民用和軍用飛機上的廣泛應用。同時,氣動支柱由於其結構簡單、維護需求低,預計將實現最快的成長。
按平台分類,預計2026年,固定翼飛機將佔全球市場的74.70%,主要得益於商用客機、支線飛機和公務機產量的成長。旋翼飛機預計將實現快速成長,這主要歸功於國防直升機採購量的增加和民用業務的擴展。
按材料分類,鈦合金因其優異的強度重量比、耐腐蝕性和抗疲勞性能,預計到2026年將佔41.26%的市場佔有率。隨著製造商日益關注輕型飛機設計,複合材料和混合結構也預計將保持最高的成長率。
按銷售管道,由於飛機產量增加和長期製造契約,OEM 部門繼續保持主導地位,而由於飛機機身老化和強制性維護要求,售後市場部門正在迅速擴張。
區域分析
預計北美將引領全球飛機支柱市場,2025年市場規模將達19.6億美元,並預計在2026年達到21億美元。該地區受益位置、大規模的國防項目以及成熟的維護、修理和大修(MRO)網路。預計美國市場在2026年將達到17億美元。
預計到 2025 年,歐洲將佔全球市場的 27.80%,到 2026 年將達到 15.2 億美元,主要得益於對航太製造地、永續航空舉措和輕型飛機技術的投資。
預計到 2025 年,亞太地區將佔全球銷售額的 26.30%,達到 13.5 億美元,並在 2026 年成長至 14.5 億美元。民用航空的擴張、國內飛機製造計劃、國防預算的增加以及 MRO 基礎設施的發展正在推動該地區的成長。
拉丁美洲、中東和非洲地區也持續穩定擴張,這得益於該地區空軍的現代化、國防採購支出的增加以及對民用航空投資的擴大。
近期產業趨勢
The global aircraft strut market was valued at USD 5.12 billion in 2025 and is projected to grow from USD 5.47 billion in 2026 to USD 9.26 billion by 2034, registering a CAGR of 6.80% during the forecast period. North America held the largest aircraft strut market share of 38.30% in 2025, supported by strong commercial aircraft production, defense modernization programs, and a well-established aerospace manufacturing ecosystem.
Aircraft struts are critical structural components designed to withstand compressive and tensile loads while supporting wings, fuselage structures, and landing gear assemblies. These components improve structural integrity, reduce bending stresses, and enhance aircraft durability. Modern aircraft increasingly utilize lightweight materials such as titanium alloys and advanced composites to improve fuel efficiency and reduce maintenance costs. Rising aircraft production, fleet modernization, and growing investments in advanced aerospace technologies continue to create strong demand for high-performance aircraft struts across commercial, military, and general aviation sectors.
Market Drivers
The growing production of commercial and military aircraft is one of the primary factors driving the aircraft strut market. Aircraft manufacturers are increasing production rates to address rising passenger traffic and significant order backlogs, directly boosting demand for landing gear and structural strut systems.
In addition, aging aircraft fleets require regular inspection, overhaul, and replacement of landing gear struts, seals, and hydraulic systems, creating strong aftermarket opportunities. Increasing defense spending worldwide and modernization of military aircraft fleets are also contributing to sustained market growth.
Market Restraints
High manufacturing and maintenance costs remain major challenges for market expansion. Aircraft struts require precision forging, high-strength aerospace-grade materials, specialized coatings, and strict certification processes, significantly increasing production costs.
Furthermore, routine maintenance, hydraulic servicing, and replacement of critical components throughout the aircraft lifecycle increase operational expenses for airlines and fleet operators, limiting faster adoption of advanced technologies.
Market Opportunities
Growing adoption of lightweight materials and smart aircraft technologies is creating significant growth opportunities. Manufacturers are increasingly integrating embedded sensors capable of monitoring pressure, load, and temperature in real time, enabling predictive maintenance and reducing unexpected equipment failures.
The increasing use of titanium alloys, carbon composites, and advanced aluminum materials also supports aircraft weight reduction, improved corrosion resistance, and enhanced fuel efficiency, making these technologies highly attractive for future aircraft platforms.
Market Trends
One of the most significant trends shaping the aircraft strut market is the adoption of additive manufacturing and near-net-shape forging technologies. These manufacturing techniques reduce raw material waste, improve production efficiency, and enable complex component designs with enhanced structural performance.
Manufacturers are also investing heavily in lightweight composite structures and digital manufacturing technologies to improve product quality while reducing production lead times and lifecycle costs.
Based on type, the landing gear struts segment is expected to dominate the market with a 46.77% share in 2026 due to its critical role in shock absorption during takeoff and landing. Support and utility struts are projected to witness the fastest growth owing to increasing adoption in lightweight aircraft, UAVs, and emerging eVTOL platforms.
By operation, hydraulic struts are anticipated to account for the largest 32.95% market share in 2026, driven by superior damping performance, reliability, and widespread use across commercial and military aircraft. Pneumatic struts are expected to register the fastest growth due to their simple design and lower maintenance requirements.
Based on platform, fixed-wing aircraft are projected to hold 74.70% of the global market in 2026, supported by rising production of commercial airliners, regional aircraft, and business jets. Rotary-wing aircraft are expected to experience rapid growth due to expanding defense helicopter procurement and civil utility operations.
By material, titanium alloys are forecast to capture 41.26% of the market in 2026, owing to their excellent strength-to-weight ratio, corrosion resistance, and fatigue performance. Composite and hybrid structures are anticipated to record the highest growth as manufacturers increasingly focus on lightweight aircraft designs.
Based on sales channel, the OEM segment continues to dominate due to increasing aircraft production and long-term manufacturing contracts, while the aftermarket segment is expanding rapidly because of aging aircraft fleets and mandatory maintenance requirements.
Regional Analysis
North America dominated the global aircraft strut market with a value of USD 1.96 billion in 2025 and is projected to reach USD 2.10 billion in 2026. The region benefits from the presence of major aircraft manufacturers, extensive defense programs, and a mature maintenance, repair, and overhaul (MRO) network. The U.S. market is expected to reach USD 1.70 billion in 2026.
Europe accounted for 27.80% of the global market in 2025 and is forecast to reach USD 1.52 billion in 2026, driven by aerospace manufacturing hubs, sustainable aviation initiatives, and investments in lightweight aircraft technologies.
Asia Pacific represented 26.30% of global revenue in 2025, reaching USD 1.35 billion, and is expected to grow to USD 1.45 billion in 2026. Expanding commercial aviation, indigenous aircraft manufacturing programs, rising defense budgets, and growing MRO infrastructure are fueling regional growth.
Latin America and the Middle East & Africa are also experiencing steady expansion, supported by regional fleet modernization, increasing defense procurement, and growing civil aviation investments.
Competitive Landscape
The aircraft strut market is moderately consolidated, with leading companies focusing on technological innovation, lightweight materials, digital maintenance solutions, and strategic partnerships with aircraft manufacturers. Continuous investments in research and development, smart monitoring technologies, and advanced manufacturing techniques are strengthening competitive positioning across global markets.
Major companies operating in the market include Safran S.A., Collins Aerospace (RTX Corporation), Liebherr-Aerospace Lindenberg GmbH, Heroux-Devtek Inc., Triumph Group, Inc., LISI Aerospace, Parker Hannifin Corporation, Woodward, Inc., Spirit AeroSystems, and Moog Inc.
Recent Industry Developments
Conclusion
The global aircraft strut market is expected to witness steady growth through 2034, driven by rising commercial aircraft production, defense fleet modernization, expanding aftermarket maintenance activities, and increasing adoption of lightweight aerospace materials. Advances in smart monitoring systems, additive manufacturing, and composite technologies are further improving product performance and operational efficiency. As aircraft manufacturers continue focusing on fuel efficiency, structural durability, and predictive maintenance capabilities, the demand for advanced aircraft strut systems is expected to remain strong across commercial, military, and emerging aviation platforms.
Segmentation By Type, Operation, Platform, Material, Sales Channel, and Region
By Type * Landing Gear Struts
By Operation * Hydraulic
By Platform * Fixed Wing Aircraft
By Material * Titanium Alloys
By Sales Channel * OEM
By Geography * North America (By Type, Operation, Platform, Material, Sales Channel, and Country)