封面
市場調查報告書
商品編碼
1560859

全球蒸發冷卻市場 - 2024 - 2031

Global Evaporative Cooling Market - 2024 - 2031

出版日期: | 出版商: DataM Intelligence | 英文 224 Pages | 商品交期: 最快1-2個工作天內

價格

本網頁內容可能與最新版本有所差異。詳細情況請與我們聯繫。

簡介目錄

市場概況

2023年全球蒸發冷卻市場規模達65.1億美元,預計2031年將達到102.4億美元,2024-2031年預測期間複合年成長率為5.83%。

蒸發冷卻因其利用自然現象,特別是透過熱水蒸發而降低空氣溫度而被青睞作為傳統冷卻方法的替代品。儘管歷史悠久,但在不需要極低溫的地區,這種方法已成為傳統空調系統的可行替代品。全球對永續能源的有利規則,加上技術突破及其相對於傳統冷卻方法的優勢,正在極大地推動市場。

鑑於氣候變遷引起的熱浪頻率不斷增加,數百萬人面臨暴露於潛在致命溫度的風險。全球人口受到氣溫升高的影響,凸顯了在不產生有害碳足跡的情況下滿足冷卻需求的重要性,這一直是推動該行業的主要因素。

由於與空調系統相比,蒸發冷卻器減少了風扇、泵浦和水等部件的數量,因此能夠以較低的成本和很少的運作費用來冷卻某些區域。這些蒸發冷卻系統的主要優點之一是擁有低成本。

此外,全球許多政府一直在實施節能舉措,鼓勵使用節能設備。例如,由於蒸發冷卻已確立的永續性,這些系統被認為符合荷蘭的能源投資扣除額 (EIA) 資格。此資格可能會帶來超過總投資 11% 的淨收益。

此外,由於這些系統中使用的組件數量減少以及隨之而來的更高的能源效率,蒸發冷卻已成為市場上最具成本效益的冷卻替代方案之一。據 Canstar Blue 稱,標準逆循環分離式空調的運作成本約為每小時 0.60 美元。然而,在額外增加 0.02 美元的水費後,蒸發冷卻系統的成本可能會降至每小時 0.10 美元以下。

市場動態

經濟且節能的冷卻:在氣候相關挑戰中對蒸發冷卻解決方案的需求不斷成長:

對經濟型冷卻解決方案的需求不斷成長是全球蒸發冷卻行業的主要推動力。蒸發冷卻器的成本比類似的冷凍空調低 50%,運作成本低 75%。蒸發冷卻在能源利用方面既環保又有效率。該技術透過減少二氧化碳、氟氯化碳和其他溫室氣體污染物的排放來提供卓越的空氣品質。

蒸發冷卻器是非常高效且具有成本效益的冷卻系統,整體而言,其運作成本比空調更低。蒸發冷卻器適合安裝在狹小的房間和工作場所,但需要透過打開門窗或安裝機械送風機來確保足夠的通風。由於減少了組件數量並提高了能源效率,蒸發冷卻系統已成為最具成本效益的冷卻選擇之一。據 Canstar Blue 稱,標準逆循環分離式空調的運作成本約為每小時 0.60 美元。然而,如果再加上 0.02 美元的水費,運行蒸發冷卻系統的總成本可能會低於每小時 0.10 美元。這些因素預計將有助於未來全球蒸發冷卻市場的強勁成長。

然而,許多正在考慮採用蒸發冷卻系統的消費者正在認真考慮對外部氣候條件的依賴的重要因素。在高溫高濕的條件下,蒸發冷卻器無法提供與之相媲美的熱舒適度。由於它對空氣濕度的影響,有可能加劇不適。此外,有必要將該電氣設備與排氣管道或打開的窗戶結合使用,或在戶外環境中使用,以最佳化其有效性。

氣候依賴性和替代技術是全球蒸發冷卻市場的主要限制:

預計在預測期內阻礙全球蒸發冷卻市場成長的因素之一是蒸發冷卻對外部氣候的依賴。蒸發冷卻過程在很大程度上依賴外部氣候因素,因為它利用外部環境的空氣來冷卻周圍環境。然而,這種考慮會影響系統在乾旱和乾燥氣候和地區實現降溫的有效性。因此,這一特殊方面對蒸發冷卻系統的接受度產生深遠影響,從而阻礙了該行業的擴張。

預計在預測期內限制全球蒸發冷卻市場擴張的另一個因素是廉價替代產品的可用性。近年來,技術的快速進步導致整合技術的成本持續下降。替代冷卻技術的普及和價格更實惠,導致客戶不願投資蒸發式空氣冷卻器。因此,預計這一因素將在可預見的未來阻礙市場的擴張。

細分市場分析

全球蒸發冷卻市場根據冷卻類型、應用、配銷通路和地區進行細分。

根據冷卻類型,直接蒸發冷卻佔據市場主導地位:

直接蒸發冷卻可利用蒸發潛熱來降低溫度並增加空氣濕度,從而促進液態水轉化為水蒸氣。它代表了蒸發低溫冷卻的基本、傳統和廣泛使用的方法。預計這些蒸發冷卻劑在美國的專業市場將受到限制,主要集中在南部地區,那裡7月中午的相對濕​​度超過40%。

直接蒸發冷卻系統適用於需要大量熱負荷補償並願意為此目的使用外部空氣的應用。它們的應用廣泛用於建築物、倉庫、商業廚房和舒適度要求較不嚴格的住宅環境。因此,系統需求取決於最終使用者和預定的操作效能目標。大多數建築物中的蒸發冷卻器主要是自然系統,也使用一些間接系統。

許多企業都專注於直接蒸發冷卻 (DEC),這通常是冷卻資料中心最節能的方法。為了擴大其資料中心冷卻部門(包括自然蒸發冷卻),Munters 於2021 年4 月將員工從維吉尼亞州遷至新設施。研發銷售,投資目標為3600萬美元。

市場地域佔有率

亞太地區的蒸發冷卻市場預計將佔據最大佔有率:

預計,在氣溫和收入上升的推動下,東南亞地區的空調 (AC) 銷售需求將大幅增加。到 2040 年,這項需求預計將達到 3 億台。

此外,國際能源總署進行的一項研究顯示,中國、美國和日本是冷卻設備銷售的主要參與者,而印度和印尼的成長最為顯著。儘管過去十年中國的銷售量超過5億台,但印度和印尼的空調需求成長相對較快。在這兩個國家,空調系統的年平均安裝量以超過 15% 的速度成長。印度

南亞對空調的需求正在快速且顯著增加,因此需要開發具有成本效益且簡單的冷卻方法。在評估這些國家的減碳目標時,蒸發冷卻成為最佳方法之一。儘管該地區資料中心產業快速成長,但東南亞在確保這些設施的長期生存能力方面仍然面臨挑戰。

然而,在未來幾年,永續性預計將成為亞洲資料中心提供者的關鍵區別因素。隨著微軟、谷歌和蘋果等全球主要科技公司製定碳中和和零永續性目標標準,以及先進節能技術的不斷開發,這一點尤其如此。

俄烏戰爭影響分析

俄羅斯和烏克蘭之間的持續衝突增加了能源成本並加劇了能源貧困,對全球蒸發冷卻產業產生了重大影響。由於這場戰爭,能源價格急劇上漲,導致世界各地的人們在供暖、冷氣、照明和交通等重要服務方面面臨更高的成本。當前的能源危機顯著加劇了與生活費用相關的困難,特別是在依賴進口化石燃料的地區。

不斷增加的支出分配不均,對低收入家庭和居住在寒冷地區的家庭造成了不成比例的影響。不斷上升的能源支出直接影響蒸發冷卻系統的經濟性和吸引力,特別是因為家庭在寒冷季節優先考慮必要的供暖而不是冷卻。

按冷卻類型

直接蒸發冷卻

間接蒸發冷卻

兩級蒸發冷卻

按申請

住宅

商業的

工業的

封閉式農業

其他

按配銷通路

大型零售商

暖通空調承包商和分銷商

其他

按地區

北美洲

我們

加拿大

墨西哥

歐洲

德國

英國

法國

義大利

西班牙

歐洲其他地區

南美洲

巴西

阿根廷

南美洲其他地區

亞太

中國

印度

日本

澳洲

亞太其他地區

中東和非洲

主要進展

米家智慧蒸發冷風扇由小米有品於2023年5月推出,為消費者提供煥然一新、愉悅的室內環境。該公司推出的智慧風扇經過精心設計,可同時提供氣流、氣候控制和加濕三種功能。該系統將配備循環水冷卻機制,能夠引入水和冰晶來提供客製化的冷卻效果。新穎的無線水箱專利設計,可隨時將水箱從機身上拆下來清洗,既保證了清潔又方便。

2023 年 6 月,Celsius Design Limited 推出了 EcoCool,這是一系列新的蒸發冷卻裝置,專門為商業和工業用途提供節能且經濟的冷卻解決方案。與傳統空調系統相比,每個 EcoCool 裝置可降低高達 15°C 的溫度,且能耗可減少 80%。

2023 年 2 月,Condair Group AG 收購了專門從事加濕和蒸發冷卻設備的澳洲經銷商 Aireven。康迪最近的收購增強了其在亞太地區的市場地位和市場佔有率,該地區對蒸發冷卻系統的需求正在迅速成長。

美國農業部 (USDA) 自然資源保護局 (NRCS) 認證了一種新型保護技術,稱為節水系統,也稱為蒸發冷卻墊。該墊預計將減少水和能源消耗,從而提高佛羅裡達州苗圃和溫室的植物生產力。此外,它也適用於冷卻牛和家禽設施。

市場競爭格局

該市場的主要全球參與者包括巴爾的摩空氣盤管公司、康迪集團、柯爾特集團、凱爾特冷卻、Celcius Design Ltd、Delta Cooling Towers Inc.、Enexio Water Technologies GMBH、Eco Cooling、Evapcool、Munters、 SPX Cooling Technologies、Phoenix Manufacturing Inc 、博內爾島和 CFW Evapcool。

為什麼購買報告?

根據冷卻類型、應用、配銷通路和區域可視化全球蒸發冷卻市場細分,並了解關鍵商業資產和參與者。

透過分析趨勢和共同開發來識別商業機會。

Excel資料表包含蒸發冷卻市場所有細分市場的大量資料點。

PDF 報告由詳盡的質性訪談和深入研究後的綜合分析組成。

產品映射以 Excel 形式提供,包含所有主要參與者的關鍵產品。

全球蒸發冷卻市場報告將提供約 86 個表格、85 個圖表和 224 頁。

2024 年目標受眾

製造商/買家

產業投資者/投資銀行家

研究專業人員

新興公司

目錄

第 1 章:方法與範圍

第 2 章:定義與概述

第 3 章:執行摘要

第 4 章:動力學

  • 影響因素
    • 促進要素
      • 經濟且節能的冷卻:氣候相關挑戰中對蒸發冷卻解決方案的需求不斷成長
    • 限制
      • 氣候依賴和替代技術是全球蒸發冷卻市場的主要限制
    • 機會
    • 影響分析

第 5 章:產業分析

  • 波特五力分析
  • 供應鏈分析
  • 定價分析
  • 監管分析
  • 俄烏戰爭影響分析
  • DMI 意見

第 6 章:依冷卻類型分類

  • 直接蒸發冷卻
  • 間接蒸發冷卻
  • 兩級蒸發冷卻

第 7 章:按申請

  • 住宅
  • 商業的
  • 工業的
  • 封閉式農業
  • 其他

第 8 章:按配銷通路

  • 大型零售商
  • 暖通空調承包商和分銷商
  • 其他

第 9 章:按地區

  • 北美洲
    • 美國
    • 加拿大
    • 墨西哥
  • 歐洲
    • 德國
    • 英國
    • 法國
    • 俄羅斯
    • 西班牙
    • 歐洲其他地區
  • 南美洲
    • 巴西
    • 阿根廷
    • 南美洲其他地區
  • 亞太
    • 中國
    • 印度
    • 日本
    • 澳洲
    • 亞太其他地區
  • 中東和非洲

第 10 章:競爭格局

  • 競爭場景
  • 市場定位/佔有率分析
  • 併購分析

第 11 章:公司簡介

  • Baltimore Aircoil Company
    • 公司概況
    • 產品組合和描述
    • 財務概覽
    • 主要進展
  • Condair Group
  • Colt Group
  • Celtic Cooling
  • Celcius Design Ltd
  • Delta Cooling Towers Inc.
  • Enexio Water Technologies GMBH
  • Eco Cooling
  • Evapcool
  • Munters
  • SPX Cooling Technologies
  • Phoenix Manufacturing Inc
  • Bonaire
  • CFW Evapcool (*LIST NOT EXHAUSTIVE)

第 12 章:附錄

簡介目錄
Product Code: EP81

Market Overview

The Global Evaporative Cooling Market reached US$ 6.51 billion in 2023 and is expected to reach US$ 10.24 billion by 2031, growing with a CAGR of 5.83 % during the forecast period 2024-2031.

Evaporative cooling is favored as a substitute for conventional cooling methods due to its utilization of a natural phenomenon, specifically the decrease in air temperature through the evaporation of hot water. Despite its long history, this method has established itself as a feasible substitute for traditional air conditioning systems in regions where very low temperatures are unnecessary. The global favorable rules for sustainable energy, together with technological breakthroughs and their advantages over conventional cooling methods, are greatly propelling the market.

Given the increasing frequency of heat waves caused by climate change, millions of individuals are at risk of being exposed to potentially lethal temperatures. The global population has been affected by the increasing temperatures, underscoring the importance of addressing the requirement for cooling without generating a detrimental carbon footprint, which has been a major factor propelling the sector.

Due to their reduced number of components compared to air conditioning systems, such as a fan, pump, and water, evaporative coolers are able to cool some areas at a low cost and with little operational expenses. Among the primary advantages of these evaporative cooling systems is their low ownership costs.

Furthermore, numerous governments across the globe have been implementing conservation initiatives to encourage the use of energy-efficient devices. For instance, because to the established sustainability of evaporative cooling, these systems have been deemed qualified for the Energy Investment Deduction (EIA) in the Netherlands. This eligibility may lead to a net benefit of over 11% on the total investment.

Moreover, due to the reduce number of components used in these systems and their consequent higher energy efficiency, evaporative cooling has emerged as one of the most cost-effective cooling alternatives available on the market. According to Canstar Blue, the cost of operating a standard reverse cycle split system air conditioner is approximately USD 0.60 per hour. Nevertheless, after adding an extra USD 0.02 for water, the cost of an evaporative cooling system might be reduced to below USD 0.10 per hour.

Market Dynamics

Economical and Energy-Efficient Cooling: The Rising Demand for Evaporative Cooling Solutions Amidst Climate-Dependent Challenges:

Increasing demand for economical cooling solutions is a major driver of the worldwide evaporative cooling industry. The cost of the evaporative cooler is up to 50% lower than that of a similar refrigerated air conditioner and up to 75% lower to operate. Evaporative cooling is both ecologically benign and highly efficient in terms of energy use. This technology provides exceptional air quality by decreasing the release of CO2, CFC, and other greenhouse gas pollutants.

Evaporative coolers are very efficient and cost-effective cooling systems that, over all, will function at a lower cost than an air conditioner. Evaporative coolers are suitable for installations in small rooms and workplaces, but it is necessary to ensure sufficient ventilation by either opening doors and windows or installing mechanical supply fans. Due to their reduced number of components and consequent higher energy efficiency, evaporative cooling systems have become one of the most cost-effective cooling choices available. According to Canstar Blue, the cost of operating a standard reverse cycle split system air conditioner is approximately US$ 0.60 per hour. Nevertheless, by including an extra US$ 0.02 for water, the total cost of operating an evaporative cooling system might be less than US$ 0.10 per hour. These factors are expected to contribute to robust growth in the worldwide evaporative cooling market in the future.

Nevertheless, many consumers who are considering adopting evaporative cooling systems are seriously considering the significant element of dependence on external climatic conditions. Under conditions of high temperature and humidity, an evaporative cooler is unable to offer comparable thermal comfort. Due to its influence on air humidity, it has the potential to heighten discomfort. Additionally, it is necessary to utilize this electrical device in conjunction with exhaust ducts or open windows, or in outdoor environments, in order to optimize its effectiveness.

Climate Dependency And Alternative Technologies Are Key Restraints On The Global Evaporative Cooling Market:

One of the factors anticipated to impede the growth of the global evaporative cooling market during the forecast period is the dependent nature of evaporative cooling on external climate. The evaporative cooling process relies heavily on external climatic factors, as it utilizes air from the outside environment to chill the surrounds. This consideration, however, impacts the effectiveness of the system in attaining temperature reductions in arid and drier climates and areas. Therefore, this particular aspect has a profound impact on the acceptance of evaporative cooling systems, so impeding the expansion of the industry.

A further factor that is anticipated to limit the expansion of the worldwide evaporative cooling market during the projected period is the availability of inexpensive substitute products. The rapid advancement of technology has led to a consistent decrease in the cost of integrating technology in recent years. The proliferation of alternative cooling technologies is increasing at more affordable prices, leading to a reluctance among customers to invest in evaporative air coolers. Accordingly, this factor is anticipated to impede the expansion of the market in the foreseeable future.

Market Segment Analysis

The global evaporative cooling market is segmented based on type of cooling, application, distribution channel, and region.

Based On The Types Of Cooling, Direct Evaporative Cooling Dominated The Market:

Direct evaporative cooling lowers the temperature and increases air humidity by harnessing the latent heat of evaporation, which facilitates the conversion of liquid water into water vapor. It represents the fundamental, conventional, and extensively employed method of evaporative low-temperature cooling. It is expected that these evaporative coolants will have a restricted specialized market in the United States, mostly in the southern region, where the relative humidity at midday in July exceeds 40%.

Direct evaporative cooling systems are suitable for applications that need substantial heat-load compensation and are willing to use external air for this purpose. Their applications find extensive use in buildings, warehouses, commercial kitchens, and residential environments characterized by less stringent comfort requirements. Hence, the system requirements are contingent upon the end users and the predetermined operational performance objectives. Evaporative coolers in most buildings are predominantly natural systems, with some indirect systems also being used.

Numerous enterprises focus on direct evaporative cooling (DEC), which is often the most energy-efficient approach for cooling a data center. Intending to expand its data center cooling division, which encompasses natural evaporative cooling, Munters relocated its employees from Virginia to the new facility in April 2021. The company aimed to establish a 365,000-square-foot facility for manufacturing, research and development, and sales, with an investment objective of USD 36 million.

Market Geographical Share

The Evaporative Cooling Market In Asia Pacific Is Estimated To Account For The Largest Share:

It is projected that the Southeast Asian region would see a substantial increase in demand for air conditioning (AC) sales, fueled by rising temperatures and revenues. This demand is estimated to reach 300 million units by 2040. Indonesia is expected to provide half of the global supply of air conditioning units.

Furthermore, a study conducted by the International Energy Agency reveals that China, the United States, and Japan are the prominent players in cooling equipment sales, while India and Indonesia are witnessing the most substantial growth. Despite China's sales of over 500 million units in the last decade, India and Indonesia had a more rapid relative growth in demand for air conditioning. In both countries, the average annual installations of air conditioning systems expanded at a rate exceeding 15%. India

The demand for air conditioning in South Asia is undergoing rapid and significant increase, which subsequently necessitates the development of cost-effective and straightforward cooling methods. When evaluating the carbon emission reduction goals of these countries, evaporative cooling emerges as one of the most optimal methods. Despite the region's rapid growth in the data center industry, Southeast Asia continues to face challenges in ensuring the long-term viability of these facilities.

However, in the next years, sustainability is expected to become a crucial distinguishing factor among data center providers in Asia. This is especially true as major global technology companies such as Microsoft, Google, and Apple establish criteria for carbon neutrality and zero sustainability objectives, and as advanced energy-efficient technology continues to be developed.

Russia-Ukraine War Impact Analysis

The continuing conflict between Russia and Ukraine has had a substantial effect on the worldwide evaporative cooling industry by increasing energy costs and worsening energy poverty. Owing to the battle, energy prices have risen sharply, causing people worldwide to struggle with higher costs for vital services such as heating, cooling, lighting, and mobility. The current energy crisis has significantly intensified the hardships related to the expense of life, particularly in areas that rely on imported fossil fuels.

Inequitable distribution of the increasing expenses results in a disproportionate impact on lower-income households and those residing in colder regions. The escalating energy expenses have a direct impact on the economics and attractiveness of evaporative cooling systems, particularly since households give priority to necessary heating rather than cooling during colder seasons.

By Type of Cooling

Direct Evaporative Cooling

Indirect Evaporative Cooling

Two-stage Evaporative Cooling

By Application

Residential

Commercial

Industrial

Confinement Farming

Other

By Distribution Channel

Big-box Retailers

HVAC Contractors and Distributors

Others

By Region

North America

US

Canada

Mexico

Europe

Germany

UK

France

Italy

Spain

Rest of Europe

South America

Brazil

Argentina

Rest of South America

Asia-Pacific

China

India

Japan

Australia

Rest of Asia-Pacific

Middle East and Africa

Key Developments

The MIJIA Smart Evaporative Cooling Fan was introduced by Xiaomi Youpin in May 2023, offering its consumers a rejuvenating and pleasant interior setting. The intelligent fan introduced by the company has been engineered to offer three simultaneous functions - airflow, climate control, and humidification. The system would be fitted with a circulating water cooling mechanism, enabling the introduction of water and ice crystals to provide customized cooling outcomes. The novel wireless water tank patent design enables the tank to be detached from the body for cleaning at any given moment, therefore guaranteeing both cleanliness and maximum convenience.

In June 2023, Celsius Design Limited introduced EcoCool, a new series of evaporative cooling units specifically engineered to offer energy-efficient and economical cooling solutions for commercial and industrial use. Each EcoCool unit has the capability to lower the temperature by a maximum of 15°C and consume up to 80% less energy compared to traditional air conditioning systems.

In February 2023, Condair Group AG purchased Aireven, an Australian distributor specializing in humidification and evaporative cooling equipment. Condair's recent acquisition enhances its market position and market share in the Asia Pacific area, which is experiencing a fast growth in demand for evaporative cooling systems.

The Natural Resources Conservation Service (NRCS) of the United States Department of Agriculture (USDA) has certified a novel conservation technique called the Water Conservation System, also referred to as an Evaporative Cooling Pad. The pad is expected to decrease water and energy consumption, thereby enhancing plant productivity in nursery operations and greenhouses located in Florida. Furthermore, it is also suitable for the purpose of chilling cattle and poultry facilities.

Market Competitive Landscape

The major global players in the market include Baltimore Aircoil Company, Condair Group, Colt Group, Celtic Cooling, Celcius Design Ltd, Delta Cooling Towers Inc., Enexio Water Technologies GMBH, Eco Cooling, Evapcool, Munters, SPX Cooling Technologies, Phoenix Manufacturing Inc, Bonaire, and CFW Evapcool.

Why Purchase the Report?

To visualize the global evaporative cooling market segmentation based on type of cooling, application, distribution channel, and region, as well as understand key commercial assets and players.

Identify commercial opportunities by analyzing trends and co-development.

Excel data sheet with numerous data points of the evaporative cooling market with all segments.

PDF report consists of a comprehensive analysis after exhaustive qualitative interviews and an in-depth study.

Product mapping available as Excel consisting of key products of all the major players.

The global evaporative cooling market report would provide approximately 86 tables, 85 figures, and 224 pages.

Target Audience 2024

Manufacturers/ Buyers

Industry Investors/Investment Bankers

Research Professionals

Emerging Companies

Table of Contents

1. Methodology and Scope

  • 1.1. Research Methodology
  • 1.2. Research Objective and Scope of the Report

2. Definition and Overview

3. Executive Summary

  • 3.1. Snippet by Type of Cooling
  • 3.2. Snippet by Application
  • 3.3. Snippet by Distribution Channel
  • 3.4. Snippet by Region

4. Dynamics

  • 4.1. Impacting Factors
    • 4.1.1. Drivers
      • 4.1.1.1. Economical and Energy-Efficient Cooling: The Rising Demand for Evaporative Cooling Solutions Amidst Climate-Dependent Challenges
    • 4.1.2. Restraints
      • 4.1.2.1. Climate Dependency And Alternative Technologies Are Key Restraints On The Global Evaporative Cooling Market
    • 4.1.3. Opportunity
    • 4.1.4. Impact Analysis

5. Industry Analysis

  • 5.1. Porter's Five Force Analysis
  • 5.2. Supply Chain Analysis
  • 5.3. Pricing Analysis
  • 5.4. Regulatory Analysis
  • 5.5. Russia-Ukraine War Impact Analysis
  • 5.6. DMI Opinion

6. By Type of Cooling

  • 6.1. Introduction
    • 6.1.1. Market Size Analysis and Y-o-Y Growth Analysis (%), By Type of Cooling
    • 6.1.2. Market Attractiveness Index, By Type of Cooling
  • 6.2. Direct Evaporative Cooling *
    • 6.2.1. Introduction
    • 6.2.2. Market Size Analysis and Y-o-Y Growth Analysis (%)
  • 6.3. Indirect Evaporative Cooling
  • 6.4. Two-stage Evaporative Cooling

7. By Application

  • 7.1. Introduction
    • 7.1.1. Market Size Analysis and Y-o-Y Growth Analysis (%), By Application
    • 7.1.2. Market Attractiveness Index, By Application
  • 7.2. Residential *
    • 7.2.1. Introduction
    • 7.2.2. Market Size Analysis and Y-o-Y Growth Analysis (%)
  • 7.3. Commercial
  • 7.4. Industrial
  • 7.5. Confinement Farming
  • 7.6. Other

8. By Distribution Channel

  • 8.1. Introduction
    • 8.1.1. Market Size Analysis and Y-o-Y Growth Analysis (%), By Distribution Channel
    • 8.1.2. Market Attractiveness Index, By Distribution Channel
  • 8.2. Big-box Retailers *
    • 8.2.1. Introduction
    • 8.2.2. Market Size Analysis and Y-o-Y Growth Analysis (%)
  • 8.3. HVAC Contractors and Distributors
  • 8.4. Others

9. By Region

  • 9.1. Introduction
    • 9.1.1. Market Size Analysis and Y-o-Y Growth Analysis (%), By Region
    • 9.1.2. Market Attractiveness Index, By Region
  • 9.2. North America
    • 9.2.1. Introduction
    • 9.2.2. Key Region-Specific Dynamics
    • 9.2.3. Market Size Analysis and Y-o-Y Growth Analysis (%), By Type of Cooling
    • 9.2.4. Market Size Analysis and Y-o-Y Growth Analysis (%), By Application
    • 9.2.5. Market Size Analysis and Y-o-Y Growth Analysis (%), By Distribution Channel
    • 9.2.6. Market Size Analysis and Y-o-Y Growth Analysis (%), By Country
      • 9.2.6.1. The US
      • 9.2.6.2. Canada
      • 9.2.6.3. Mexico
  • 9.3. Europe
    • 9.3.1. Introduction
    • 9.3.2. Key Region-Specific Dynamics
    • 9.3.3. Market Size Analysis and Y-o-Y Growth Analysis (%), By Type of Cooling
    • 9.3.4. Market Size Analysis and Y-o-Y Growth Analysis (%), By Application
    • 9.3.5. Market Size Analysis and Y-o-Y Growth Analysis (%), By Distribution Channel
    • 9.3.6. Market Size Analysis and Y-o-Y Growth Analysis (%), By Country
      • 9.3.6.1. Germany
      • 9.3.6.2. UK
      • 9.3.6.3. France
      • 9.3.6.4. Russia
      • 9.3.6.5. Spain
      • 9.3.6.6. Rest of Europe
  • 9.4. South America
    • 9.4.1. Introduction
    • 9.4.2. Key Region-Specific Dynamics
    • 9.4.3. Market Size Analysis and Y-o-Y Growth Analysis (%), By Type of Cooling
    • 9.4.4. Market Size Analysis and Y-o-Y Growth Analysis (%), By Application
    • 9.4.5. Market Size Analysis and Y-o-Y Growth Analysis (%), By Distribution Channel
    • 9.4.6. Market Size Analysis and Y-o-Y Growth Analysis (%), By Country
      • 9.4.6.1. Brazil
      • 9.4.6.2. Argentina
      • 9.4.6.3. Rest of South America
  • 9.5. Asia-Pacific
    • 9.5.1. Introduction
    • 9.5.2. Key Region-Specific Dynamics
    • 9.5.3. Market Size Analysis and Y-o-Y Growth Analysis (%), By Type of Cooling
    • 9.5.4. Market Size Analysis and Y-o-Y Growth Analysis (%), By Application
    • 9.5.5. Market Size Analysis and Y-o-Y Growth Analysis (%), By Distribution Channel
    • 9.5.6. Market Size Analysis and Y-o-Y Growth Analysis (%), By Country
      • 9.5.6.1. China
      • 9.5.6.2. India
      • 9.5.6.3. Japan
      • 9.5.6.4. Australia
      • 9.5.6.5. Rest of Asia-Pacific
  • 9.6. Middle East and Africa
    • 9.6.1. Introduction
    • 9.6.2. Key Region-Specific Dynamics
    • 9.6.3. Market Size Analysis and Y-o-Y Growth Analysis (%), By Type of Cooling
    • 9.6.4. Market Size Analysis and Y-o-Y Growth Analysis (%), By Application
    • 9.6.5. Market Size Analysis and Y-o-Y Growth Analysis (%), By Distribution Channel

10. Competitive Landscape

  • 10.1. Competitive Scenario
  • 10.2. Market Positioning/Share Analysis
  • 10.3. Mergers and Acquisitions Analysis

11. Company Profiles

  • 11.1. Baltimore Aircoil Company*
    • 11.1.1. Company Overview
    • 11.1.2. Product Portfolio and Description
    • 11.1.3. Financial Overview
    • 11.1.4. Key Developments
  • 11.2. Condair Group
  • 11.3. Colt Group
  • 11.4. Celtic Cooling
  • 11.5. Celcius Design Ltd
  • 11.6. Delta Cooling Towers Inc.
  • 11.7. Enexio Water Technologies GMBH
  • 11.8. Eco Cooling
  • 11.9. Evapcool
  • 11.10. Munters
  • 11.11. SPX Cooling Technologies
  • 11.12. Phoenix Manufacturing Inc
  • 11.13. Bonaire
  • 11.14. CFW Evapcool (*LIST NOT EXHAUSTIVE)

12. Appendix

  • 12.1. About Us and Services
  • 12.2. Contact Us