Global Thermal Conductive Polymer Material Market is valued at approximately USD 139.3 million in 2022 and is anticipated to grow with a healthy growth rate of more than 12.8% over the forecast period 2023-2030. Thermal conductive polymer materials, also known as thermally conductive polymers or thermal interface materials (TIMs), are a type of material that exhibits both thermal insulation and thermal conductivity properties. These materials are specifically designed to enhance thermal management and heat dissipation in electronic devices, power modules, and other applications where efficient heat transfer is crucial. The Thermal Conductive Polymer Material Market is expanding because of factors such as the rising demand for lightweight and cost-effective materials, increasing demand for efficient thermal management, and surging applications in emerging industries.
In addition, the increasing demand due to the expanding electric vehicle industry is acting as a catalyzing factor for market growth across the globe. The growing adoption of electric vehicles (EVs) and hybrid electric vehicles (HEVs) requires effective thermal management solutions to dissipate heat generated by high-power batteries, electric motors, and power electronics. Thermal conductive polymer materials are used to enhance thermal performance and reliability of EV components, thereby supporting the expansion of the electric vehicle market. According to International Energy Agency (IEA), in 2020, the number of electric vehicles sold in the United States was 295,7000 and the number increased significantly and reached 631,000 in 2021. As a result, the rising demand for EVs is anticipated to propel the market growth. Thus, these aforementioned factors are propelling the growth of the Thermal Conductive Polymer Material Market during the estimated period. Moreover, the growing focus on emphasis on energy efficiency and sustainability, as well as the growth of electronic and electrical industries present various lucrative opportunities over the forecast years. However, the lack of thermal properties and processing difficulties due to the moldability and flowability of thermal conductive polymer materials are challenging the market growth throughout the forecast period of 2023-2030.
The key regions considered for the Global Thermal Conductive Polymer Material Market study include: Asia Pacific, North America, Europe, Latin America, and Middle East & Africa. North America dominated the market in 2022 owing to the high adoption rate of thermally conductive polymers, growing focus on research & development activities, and presence of leading manufacturerssuch as RTP Company, Avient Corporation (PolyOne Corporation), and DuPont. Whereas, Asia Pacific is expected to grow at the highest CAGR over the forecast years. The rapid industrial expansion, growing charging infrastructure, and flourishing growth of the electronics industry are significantly propelling the market demand across the region.
Major market players included in this report are:
- SABIC (Saudi Arabia)
- RTP Company (U.S.)
- Avient Corporation (U.S.)
- Celanese Corporation (U.S.)
- Covestro AG (Germany)
- DSM (Netherlands)
- MITSUBISHI ENGINEERING-PLASTICS CORPORATION (Japan)
- HELLA GmbH & Co. KGaA (Germany)
- TORAY INDUSTRIES, INC. (Japan)
- DuPont (U.S.)
Recent Developments in the Market:
- In December 2022, The Ensinger PolyTech, Inc- a group subsidiary announced the acquisition of the assets of Poly-Tech Industrial, Inc., which comprises a production facility and high-performance material knowledge. The aim of this acquisition is to boost the company's production capacity.
- In September 2022, X2F announced the company's a collaborative agreement with Covestro AG to develop a thermally conductive automotive heat-sink with in-mold electronics by utilizing X2F's transformative controlled viscosity molding technology as new heat-sink capacity, molded of Makrolon polycarbonate (PC) is approximately half as heavy as the typical aluminum part.
Global Thermal Conductive Polymer Material Market Report Scope:
- Historical Data: 2020 - 2021
- Base Year for Estimation: 2022
- Forecast period: 2023-2030
- Report Coverage: Revenue forecast, Company Ranking, Competitive Landscape, Growth factors, and Trends
- Segments Covered: Type, Application, Region
- Regional Scope: North America; Europe; Asia Pacific; Latin America; Middle East & Africa
- Customization Scope: Free report customization (equivalent up to 8 analyst's working hours) with purchase. Addition or alteration to country, regional & segment scope*
The objective of the study is to define market sizes of different segments & countries in recent years and to forecast the values to the coming years. The report is designed to incorporate both qualitative and quantitative aspects of the industry within countries involved in the study.
The report also caters detailed information about the crucial aspects such as driving factors & challenges which will define the future growth of the market. Additionally, it also incorporates potential opportunities in micro markets for stakeholders to invest along with the detailed analysis of competitive landscape and product offerings of key players. The detailed segments and sub-segment of the market are explained below:
By Type:
- Polyamide
- Polybutylene Terephthalate
- Polycarbonate
- Polyphenylene Sulfide
- Polyetherimide
- Others
By Application:
- Electrical & Electronics
- Industrial
- Automotive
- Healthcare
- Aerospace
- Others
By Region:
- Europe
- UK
- Germany
- France
- Spain
- Italy
- ROE
- Asia Pacific
- China
- India
- Japan
- Australia
- South Korea
- RoAPAC
- Middle East & Africa
- Saudi Arabia
- South Africa
- Rest of Middle East & Africa
Table of Contents
Chapter 1. Executive Summary
- 1.1. Market Snapshot
- 1.2. Global & Segmental Market Estimates & Forecasts, 2020-2030 (USD Million)
- 1.2.1. Thermal Conductive Polymer Material Market, by Region, 2020-2030 (USD Million)
- 1.2.2. Thermal Conductive Polymer Material Market, by Type, 2020-2030 (USD Million)
- 1.2.3. Thermal Conductive Polymer Material Market, by Application, 2020-2030 (USD Million)
- 1.3. Key Trends
- 1.4. Estimation Methodology
- 1.5. Research Assumption
Chapter 2. Global Thermal Conductive Polymer Material Market Definition and Scope
- 2.1. Objective of the Study
- 2.2. Market Definition & Scope
- 2.2.1. Industry Evolution
- 2.2.2. Scope of the Study
- 2.3. Years Considered for the Study
- 2.4. Currency Conversion Rates
Chapter 3. Global Thermal Conductive Polymer Material Market Dynamics
- 3.1. Thermal Conductive Polymer Material Market Impact Analysis (2020-2030)
- 3.1.1. Market Drivers
- 3.1.1.1. Increasing demand for efficient thermal management
- 3.1.1.2. Expanding electric vehicle industry
- 3.1.2. Market Challenges
- 3.1.2.1. Lack of thermal properties
- 3.1.2.2. Processing Difficulties due to the moldability and flowability of thermal conductive polymer materials
- 3.1.3. Market Opportunities
- 3.1.3.1. Growing focus on emphasis on energy efficiency and sustainability
- 3.1.3.2. Development of electronic and electrical industries
Chapter 4. Global Thermal Conductive Polymer Material Market Industry Analysis
- 4.1. Porter's 5 Force Model
- 4.1.1. Bargaining Power of Suppliers
- 4.1.2. Bargaining Power of Buyers
- 4.1.3. Threat of New Entrants
- 4.1.4. Threat of Substitutes
- 4.1.5. Competitive Rivalry
- 4.2. Porter's 5 Force Impact Analysis
- 4.3. PEST Analysis
- 4.3.1. Political
- 4.3.2. Economical
- 4.3.3. Social
- 4.3.4. Technological
- 4.3.5. Environmental
- 4.3.6. Legal
- 4.4. Top investment opportunity
- 4.5. Top winning strategies
- 4.6. COVID-19 Impact Analysis
- 4.7. Disruptive Trends
- 4.8. Industry Expert Perspective
- 4.9. Analyst Recommendation & Conclusion
Chapter 5. Global Thermal Conductive Polymer Material Market, by Type
- 5.1. Market Snapshot
- 5.2. Global Thermal Conductive Polymer Material Market by Type, Performance - Potential Analysis
- 5.3. Global Thermal Conductive Polymer Material Market Estimates & Forecasts by Type 2020-2030 (USD Million)
- 5.4. Thermal Conductive Polymer Material Market, Sub Segment Analysis
- 5.4.1. Polyamide
- 5.4.2. Polybutylene Terephthalate
- 5.4.3. Polycarbonate
- 5.4.4. Polyphenylene Sulfide
- 5.4.5. Polyetherimide
- 5.4.6. Others
Chapter 6. Global Thermal Conductive Polymer Material Market, by Application
- 6.1. Market Snapshot
- 6.2. Global Thermal Conductive Polymer Material Market by Application, Performance - Potential Analysis
- 6.3. Global Thermal Conductive Polymer Material Market Estimates & Forecasts by Application 2020-2030 (USD Million)
- 6.4. Thermal Conductive Polymer Material Market, Sub Segment Analysis
- 6.4.1. Electrical & Electronics
- 6.4.2. Industrial
- 6.4.3. Automotive
- 6.4.4. Healthcare
- 6.4.5. Aerospace
- 6.4.6. Others
Chapter 7. Global Thermal Conductive Polymer Material Market, Regional Analysis
- 7.1. Top Leading Countries
- 7.2. Top Emerging Countries
- 7.3. Thermal Conductive Polymer Material Market, Regional Market Snapshot
- 7.4. North America Thermal Conductive Polymer Material Market
- 7.4.1. U.S. Thermal Conductive Polymer Material Market
- 7.4.1.1. Type breakdown estimates & forecasts, 2020-2030
- 7.4.1.2. Application breakdown estimates & forecasts, 2020-2030
- 7.4.2. Canada Thermal Conductive Polymer Material Market
- 7.5. Europe Thermal Conductive Polymer Material Market Snapshot
- 7.5.1. U.K. Thermal Conductive Polymer Material Market
- 7.5.2. Germany Thermal Conductive Polymer Material Market
- 7.5.3. France Thermal Conductive Polymer Material Market
- 7.5.4. Spain Thermal Conductive Polymer Material Market
- 7.5.5. Italy Thermal Conductive Polymer Material Market
- 7.5.6. Rest of Europe Thermal Conductive Polymer Material Market
- 7.6. Asia-Pacific Thermal Conductive Polymer Material Market Snapshot
- 7.6.1. China Thermal Conductive Polymer Material Market
- 7.6.2. India Thermal Conductive Polymer Material Market
- 7.6.3. Japan Thermal Conductive Polymer Material Market
- 7.6.4. Australia Thermal Conductive Polymer Material Market
- 7.6.5. South Korea Thermal Conductive Polymer Material Market
- 7.6.6. Rest of Asia Pacific Thermal Conductive Polymer Material Market
- 7.7. Latin America Thermal Conductive Polymer Material Market Snapshot
- 7.7.1. Brazil Thermal Conductive Polymer Material Market
- 7.7.2. Mexico Thermal Conductive Polymer Material Market
- 7.8. Middle East & Africa Thermal Conductive Polymer Material Market
- 7.8.1. Saudi Arabia Thermal Conductive Polymer Material Market
- 7.8.2. South Africa Thermal Conductive Polymer Material Market
- 7.8.3. Rest of Middle East & Africa Thermal Conductive Polymer Material Market
Chapter 8. Competitive Intelligence
- 8.1. Key Company SWOT Analysis
- 8.1.1. Company 1
- 8.1.2. Company 2
- 8.1.3. Company 3
- 8.2. Top Market Strategies
- 8.3. Company Profiles
- 8.3.1. SABIC (Saudi Arabia)
- 8.3.1.1. Key Information
- 8.3.1.2. Overview
- 8.3.1.3. Financial (Subject to Data Availability)
- 8.3.1.4. Product Summary
- 8.3.1.5. Recent Developments
- 8.3.2. RTP Company (U.S.)
- 8.3.3. Avient Corporation (U.S.)
- 8.3.4. Celanese Corporation (U.S.)
- 8.3.5. Covestro AG (Germany)
- 8.3.6. DSM (Netherlands)
- 8.3.7. MITSUBISHI ENGINEERING-PLASTICS CORPORATION (Japan)
- 8.3.8. HELLA GmbH & Co. KGaA (Germany)
- 8.3.9. TORAY INDUSTRIES, INC. (Japan)
- 8.3.10. DuPont (U.S.)
Chapter 9. Research Process
- 9.1. Research Process
- 9.1.1. Data Mining
- 9.1.2. Analysis
- 9.1.3. Market Estimation
- 9.1.4. Validation
- 9.1.5. Publishing
- 9.2. Research Attributes
- 9.3. Research Assumption