風力渦輪機齒輪潤滑油的全球市場規模：按產品、按應用、按地區、範圍和預測

風電齒輪潤滑油市場規模及預測

2024年風力渦輪機齒輪潤滑油市場規模為1.9353億美元，在2024-2031年預測期間複合年增長率為6.90%，預計到2031年將達到3.3004億美元。風力渦輪機安裝數量的增加正在推動全球對風力渦輪機齒輪油的需求。風力渦輪機齒輪油需求的成長將取決於換油頻率和新風力渦輪機安裝等因素。亞太地區、歐洲和北美風力發電廠的增加預計將推動風力渦輪機齒輪油市場的發展。此外，全球風電場容量的增加和風電場專案的激增將推動市場成長。全球風力渦輪機齒輪潤滑油市場報告提供了對市場的整體評估。它對關鍵細分市場、趨勢、市場推動因素、阻礙因素、競爭格局以及在市場中發揮關鍵作用的因素進行了全面分析。

全球風力渦輪機齒輪潤滑油市場的定義

風力渦輪機多年來一直以一種形式使用。渦輪滾動軸承中齒輪油的主要作用是最大限度地減少滾動表面和滑動表面之間的接觸。因此，摩擦和磨損保持在咖啡水平。齒輪油具有以下優點，包括散熱軸承、防止腐蝕、沖洗磨損顆粒和污染物（帶油過濾的循環油潤滑）以及支持軸承密封件的密封效果（潤滑脂套環和氣動油潤滑）。 。相對運動的表面完全或幾乎完全被潤滑油膜隔開。

液力齒輪油主要用於額定輸出0.75MW至2.5MW的風力發電機組。此潤滑劑透過接觸表面的相對運動移動到狹窄的潤滑間隙。由於直接接觸區域存在非常高的壓力，這裡的潤滑油在短時間內具有非常高的黏度，促進接觸表面的分離。容量範圍為4兆瓦至5兆瓦的先進風力渦輪機的開發正處於測試階段。

全球風力渦輪機齒輪潤滑油市場概況

由於風能對環境無害，其作為電力來源的需求將會增加，並具有擴大風能產業的潛力。這種成長正在推動全球對風力渦輪機齒輪潤滑油市場的需求。此外，各國政府正在推動風能產業的發展。隨著政府機構對風力發電機零件和設備實施補貼、退稅和最低採購價格等政策，鼓勵傳統能源向再生能源轉型，風能變得越來越受歡迎，並取得了巨大的成長。

增加政府支出以發展再生能源發電廠、太陽能和風能等基礎設施發展。這可能會推動風力渦輪機齒輪潤滑油市場的發展。此外，技術創新和進步促進了數位風電場的發展，其中包括風力渦輪機產品和支援解決方案。預計這些將推動全球風力渦輪機齒輪潤滑油市場的成長。

也存在阻礙整體市場成長的課題和阻礙因素。轉向合成潤滑油等因素導致風力渦輪機齒輪潤滑油市場的整體需求萎縮。此外，不斷提高的電池平價限制了市場的成長。此外，油價上漲和環境惡化預計將在預測期內減緩成長。嚴格的環境標準和政府的持續改革是阻礙全球風力渦輪機齒輪潤滑油市場整體成長的潛在阻礙因素。然而，技術的進步和對再生能源的需求提供了利潤豐厚的成長機會。

目錄

第1章 全球風電齒輪潤滑油市場介紹

• 市場概況
• 調查範圍
• 先決條件

第 2 章執行摘要

第3章 驗證市場研究研究方法

• 數據挖掘
• 驗證
• 一次資料
• 數據源列表

第4章全球風電齒輪潤滑油市場展望

• 概述
• 市場動態
  • 促進因素
  • 阻礙因素
  • 機會
• 波特的五力模型
• 價值鏈分析

第5章全球風力渦輪機齒輪潤滑油市場：依產品

• 概述
• 礦物潤滑劑
• 合成潤滑劑

第6章全球風力發電機齒輪潤滑油市場：依應用分類

• 概述
• 陸上
• 離岸

第7章全球風力發電機齒輪潤滑油市場：依地區

• 概述
• 北美
  • 美國
  • 加拿大
  • 墨西哥
• 歐洲
  • 德國
  • 英國
  • 法國
  • 歐洲其他地區
• 亞太地區
  • 中國
  • 日本
  • 印度
  • 亞太其他地區
• 世界其他地區
  • 拉丁美洲
  • 中東/非洲

第8章全球風力渦輪機齒輪潤滑油市場：競爭格局

• 概述
• 各公司市場排名
• 主要發展策略

第9章 公司簡介

• Exxon Mobil
• Royal Dutch Shell
• AMSOIL
• BP
• Chevron
• Castrol
• Kluber Lubrication
• Afton Chemical
• Evonik Industries

第10章附錄

• 相關研究

Wind Turbine Gear Lubricant Market Size And Forecast

Wind Turbine Gear Lubricant Market size was valued at USD 193.53 Million in 2024 and is projected to reach USD 330.04 Million by 2031, growing at a CAGR of 6.90% during the forecasted period 2024 to 2031. The growing number of wind turbine installations is boosting the demand for wind turbine gear oil globally. The growing demand for wind turbine gear oil is dependent on factors such as the frequency of oil change and new wind turbine installations. The growing number of wind farms in APAC, Europe, and North America is expected to drive the market for wind turbine gear oil. Moreover, The growing capacity of wind farms and the surge in the number of wind farm projects globally will foster market growth. The Global Wind Turbine Gear Lubricant Market report provides a holistic evaluation of the market. The report offers a comprehensive analysis of key segments, trends, drivers, restraints, competitive landscape, and factors that are playing a substantial role in the market.

Global Wind Turbine Gear Lubricant Market Definition

Wind turbines have been used in one form over many years. The primary function of the gear oil for rolling bearings during a turbine is to minimize contact between rolling and sliding surfaces. As a result, friction and wear are kept to a coffee level. Gear oil comprises the following functions - heat dissipation from the bearing, corrosion protection, flushing out of wear particles and contaminants (recirculating oil lubrication with filtration of the oil), and support for the sealing effect of bearing seals i.e. grease collar and pneumatic oil lubrication. Surfaces moving relative to every other are separated completely or almost completely by a lubricant film.

This film is called gear oil. Hydrodynamic lubrication gear oil is predominantly used for wind turbines with a power rating of 0.75 MW to 2.5 MW. This lubricant is transferred to the narrowing lubrication gap through the motion of the contact surfaces relative to one another. Due to the extremely high pressure present in the immediate contact zone, the lubricant here has extremely high viscosity for a brief period and facilitates the separation of the contact surfaces. Development of advanced wind turbines within the 4 MW to five MW capacity range is under the testing phase.

What's inside a VMR industry report?

Our reports include actionable data and forward-looking analysis that help you craft pitches, create business plans, build presentations and write proposals.

Global Wind Turbine Gear Lubricant Market Overview

A rise in demand for wind energy as a source of electricity owing to its environmentally-friendly nature can augment the wind energy sector. This augmentation is boosting the global need for Wind Turbine Gear Lubricant Market. Moreover, the governments of various countries are promoting the wind energy industry. Wind energy is experiencing significant growth as government bodies are implementing policies such as subsidiaries, tax rebates, and minimum purchase price on wind turbine components and equipment for facilitating a shift from conventional energy to renewable energy.

Increased government spending to develop plants for the generation of renewable energy, developing infrastructure such as solar and wind energy. This, in turn, is likely to drive the Wind Turbine Gear Lubricant Market. Furthermore, Technological innovations and advancements have resulted in the development of digital wind farms which comprise wind turbine products and supporting solutions. These have positively anticipated propelling the growth of the Global Wind Turbine Gear Lubricant Market.

There are certain challenges and restraints faced that will hinder the overall market growth. The factors such as the shift toward synthetic lubricants caused a shrink in the overall demand for Wind Turbine Gear Lubricant Market. Also, increasing battery parity is limiting the market growth. Further, increasing crude oil prices, environmental degradation are estimated to sluggish growth during the forecast period. The stringent environmental norms and continuous reforms by governments are the potential restraints hampering the overall growth of the Global Wind Turbine Gear Lubricant Market. Nevertheless, the advancements in technologies, demand for renewable energy offer favorable growth opportunities.

Global Wind Turbine Gear Lubricant Market Segmentation Analysis

The Global Wind Turbine Gear Lubricant Market is segmented on the basis of Product, Application, And Geography.

Wind Turbine Gear Lubricant Market, By Product

• Mineral-Based Lubricants
• Synthetic-Based Lubricants

Based on Product, the market is bifurcated into Mineral-Based Lubricants and Synthetic-Based Lubricants. The synthetic-based lubricants segment holds the largest market share and is estimated to witness the highest CAGR during the forecast period.

Wind Turbine Gear Lubricant Market, By Application

• On-Shore
• Off-Shore

Based on Application, the market is bifurcated into On-Shore and Off-Shore. The on-shore segment holds the largest market share during the forecast period. The factors that can be attributed to increasing well operations in the onshore fields especially in Saudi Arabia, growing demand for oil and gas, the growing number of research initiatives to develop abandoned oil wells, and renewed projects that are accelerating the demand for the on-shore segment.

Wind Turbine Gear Lubricant Market, By Geography

• North America
• Europe
• Asia Pacific
• Rest of the world

Based on Geography, the market is classified into North America, Europe, Asia Pacific, and the Rest of the world. Asia-Pacific holds the largest market share. The favorable regulatory norms in the Asia Pacific, strong governmental initiatives to encourage renewable power generation, rise in investments to explore the potential of the offshore wind energy sector, and ongoing projects will boost the market in the APAC region.

Key Players

• The "Global Wind Turbine Gear Lubricant Market" study report will provide a valuable insight with an emphasis on the global market including some of the major players such as
• Exxon Mobil, Royal Dutch Shell, AMSOIL, BP, Chevron, Castrol, Kluber Lubrication, Afton Chemical, Evonik Industries, FUCHS, Lubrita, Quaker Chemical.

Our market analysis also entails a section solely dedicated to such major players wherein our analysts provide an insight into the financial statements of all the major players, along with its product benchmarking and SWOT analysis. The competitive landscape section also includes key development strategies, market share, and market ranking analysis of the above-mentioned players globally.

TABLE OF CONTENTS

1. Introduction of Global Wind Turbine Gear Lubricant Market

• 1.1 Overview of the Market
• 1.2 Scope of Report
• 1.3 Assumptions

2. Executive Summary

3. Research Methodology of Verified Market Research

• 3.1 Data Mining
• 3.2 Validation
• 3.3 Primary Interviews
• 3.4 List of Data Sources

4. Global Wind Turbine Gear Lubricant Market Outlook

• 4.1 Overview
• 4.2 Market Dynamics
  • 4.2.1 Drivers
  • 4.2.2 Restraints
  • 4.2.3 Opportunities
• 4.3 Porters Five Force Model
• 4.4 Value Chain Analysis

5. Global Wind Turbine Gear Lubricant Market, By Product

• 5.1 Overview
• 5.2 Mineral-Based Lubricants
• 5.3 Synthetic-Based Lubricants

6. Global Wind Turbine Gear Lubricant Market, By Application

• 6.1 Overview
• 6.2 On-Shore
• 6.3 Off-Shore

7. Global Wind Turbine Gear Lubricant Market, By Geography

• 7.1 Overview
• 7.2 North America
  • 7.2.1 U.S.
  • 7.2.2 Canada
  • 7.2.3 Mexico
• 7.3 Europe
  • 7.3.1 Germany
  • 7.3.2 U.K.
  • 7.3.3 France
  • 7.3.4 Rest of Europe
• 7.4 Asia Pacific
  • 7.4.1 China
  • 7.4.2 Japan
  • 7.4.3 India
  • 7.4.4 Rest of Asia Pacific
• 7.5 Rest of the World
  • 7.5.1 Latin America
  • 7.5.2 Middle East And Africa

8. Global Wind Turbine Gear Lubricant Market Competitive Landscape

• 8.1 Overview
• 8.2 Company Market Ranking
• 8.3 Key Development Strategies

9. Company Profiles

• 9.1 Exxon Mobil
  • 9.1.1 Overview
  • 9.1.2 Financial Performance
  • 9.1.3 Product Outlook
  • 9.1.4 Key Developments
• 9.2 Royal Dutch Shell
  • 9.2.1 Overview
  • 9.2.2 Financial Performance
  • 9.2.3 Product Outlook
  • 9.2.4 Key Developments
• 9.3 AMSOIL
  • 9.3.1 Overview
  • 9.3.2 Financial Performance
  • 9.3.3 Product Outlook
  • 9.3.4 Key Developments
• 9.4 BP
  • 9.4.1 Overview
  • 9.4.2 Financial Performance
  • 9.4.3 Product Outlook
  • 9.4.4 Key Developments
• 9.5 Chevron
  • 9.5.1 Overview
  • 9.5.2 Financial Performance
  • 9.5.3 Product Outlook
  • 9.5.4 Key Developments
• 9.6 Castrol
  • 9.6.1 Overview
  • 9.6.2 Financial Performance
  • 9.6.3 Product Outlook
  • 9.6.4 Key Developments
• 9.7 Kluber Lubrication
  • 9.7.1 Overview
  • 9.7.2 Financial Performance
  • 9.7.3 Product Outlook
  • 9.7.4 Key Developments
• 9.8 Afton Chemical
  • 9.8.1 Overview
  • 9.8.2 Financial Performance
  • 9.8.3 Product Outlook
  • 9.8.4 Key Developments
• 9.9 Evonik Industries
  • 9.9.1 Overview
  • 9.9.2 Financial Performance
  • 9.9.3 Product Outlook
  • 9.9.4 Key Developments

10. Appendix

• 10.1 Related Research