接地設備市場－全球產業規模、佔有率、趨勢、機會和預測（按產品、最終用戶、地區和競爭細分，2020-2030 年）

2024年接地設備市場規模為61.8億美元，預計到2030年將達到95億美元，複合年成長率為7.27%。接地設備市場是一個全球性產業，專注於製造、分銷、安裝和維護用於將電能安全洩入地面的組件和系統，從而保護人員、設備和基礎設施免受雷擊、故障電流和電壓突波等電氣危害。

接地，也稱為接地裝置，是發電、輸配電、工業製造、石油天然氣、建築、交通、電信以及住宅和商業建築等眾多領域的基本安全要求。市場涵蓋各種設備，例如接地棒、接地導體、接地板、接地夾、接地化合物和檢查坑，以及化學接地系統、數位故障檢測設備和整合接地保護網路等先進解決方案。接地設備的主要功能是透過在電氣裝置和地面之間建立直接的物理連接，確保電氣系統在安全參數範圍內運行，從而防止電壓積聚，避免造成設備損壞、火災或人員傷害。

關鍵市場促進因素

工業和基礎設施領域的監管和安全合規性

主要市場挑戰

先進接地系統成本高，且在價格敏感型市場的應用有限

主要市場趨勢

更加重視安全、合規和標準化

目錄

第 1 章：產品概述

第2章：研究方法

第3章：執行摘要

第4章：顧客之聲

第5章：全球接地設備市場展望

• 市場規模和預測
  • 按價值
• 市場佔有率和預測
  • 依產品（MS 接地平面、GI 接地平面和 CI 接地平面）
  • 按最終用戶（工業、商業和住宅）
  • 按地區
• 按公司分類（2024）
• 市場地圖

第6章：北美接地設備市場展望

• 市場規模和預測
• 市場佔有率和預測
• 北美：國家分析
  • 美國
  • 加拿大
  • 墨西哥

第7章：歐洲接地設備市場展望

• 市場規模和預測
• 市場佔有率和預測
• 歐洲：國家分析
  • 德國
  • 英國
  • 義大利
  • 法國
  • 西班牙

第8章：亞太接地設備市場展望

• 市場規模和預測
• 市場佔有率和預測
• 亞太地區：國家分析
  • 中國
  • 印度
  • 日本
  • 韓國
  • 澳洲

第9章：南美洲接地設備市場展望

• 市場規模和預測
• 市場佔有率和預測
• 南美洲：國家分析
  • 巴西
  • 阿根廷
  • 哥倫比亞

第10章：中東與非洲接地設備市場展望

• 市場規模和預測
• 市場佔有率和預測
• 中東和非洲：國家分析
  • 南非
  • 沙烏地阿拉伯
  • 阿拉伯聯合大公國
  • 科威特
  • 土耳其

第 11 章：市場動態

• 驅動程式
• 挑戰

第 12 章：市場趨勢與發展

• 合併與收購（如有）
• 產品發布（如有）
• 最新動態

第13章：公司簡介

• ABB Ltd.
• Siemens AG
• Schneider Electric SE
• Harger Lightning & Grounding
• Pentair plc
• Crompton Greaves Ltd.
• Eaton Corporation plc
• Mersen Group
• OBO Bettermann GmbH & Co. KG
• Raychem RPG Pvt. Ltd.

第 14 章：策略建議

第15章調查會社について,免責事項

The Earthing Equipment Market was valued at USD 6.18 Billion in 2024 and is expected to reach USD 9.50 Billion by 2030 with a CAGR of 7.27%. The Earthing Equipment Market refers to the global industry focused on the manufacturing, distribution, installation, and maintenance of components and systems designed to safely discharge electrical energy into the ground, thereby protecting people, equipment, and infrastructure from electrical hazards such as lightning strikes, fault currents, and voltage surges.

Earthing, also known as grounding, is a fundamental safety requirement across a wide range of sectors including power generation, transmission and distribution, industrial manufacturing, oil and gas, construction, transportation, telecommunications, and residential and commercial buildings. The market encompasses a variety of equipment such as ground rods, earthing conductors, earth plates, clamps, earthing compounds, and inspection pits, along with advanced solutions like chemical earthing systems, digital fault detection devices, and integrated earthing protection networks. The primary function of earthing equipment is to ensure electrical systems operate within safe parameters by creating a direct physical connection between electrical installations and the earth, thereby preventing the build-up of voltages that can lead to equipment damage, fire hazards, or harm to personnel.

Key Market Drivers

Regulatory and Safety Compliance in Industrial and Infrastructure Sectors

As industrial operations and infrastructure development evolve globally, escalating emphasis on regulatory compliance and worker safety is fueling demand for robust earthing equipment. Increasingly stringent international and national safety standards-such as IEC, NEC, IEEE, and OSHA-prescribe accurate earthing and bonding protocols to mitigate risks associated with electrical shock, arc flash incidents, lightning strikes, and static discharge. Industries handling flammable liquids, gases, or dust-laden environments, including oil & gas, petrochemicals, mining, and grain processing, typically operate under high-hazard conditions where the potential for electrostatic ignition can cause catastrophic consequences.

In order to adhere to evolving safety frameworks and avoid substantial penalties or shutdowns, organizations are investing heavily in certified earthing solutions-from grounding rods and grids to clamps, cables, mats, and monitoring systems. The rise of next-generation infrastructure, including smart grids, electric vehicle (EV) charging stations, renewable energy installations, data centers, and high-speed rail, introduces fresh safety compliance challenges. For instance, EV charging stations must integrate grounding solutions that prevent leakage currents and ensure proper equipment isolation, while distributed solar and wind power systems require earthing mechanisms capable of handling bidirectional currents and lightning protection. This creates a pipeline of sales growth for earthing equipment manufacturers offering comprehensive, specification-aligned product lines.

Additionally, construction companies and engineering consultants are increasingly adopting digital compliance tools-such as earthing simulation software and IoT-enabled monitor-logger systems-that facilitate real-time compliance verification and safety auditing. By bundling grounding hardware with intelligent monitoring and certification services, solution providers are capturing recurring revenue and strengthening brand trust with safety-conscious clients. Overall, compliance-driven modernization of equipment and infrastructure is an enduring driver in the earthing equipment market, pushing organizations to re-evaluate grounding designs, upgrade aging systems, and deploy comprehensive safety solutions aligned with contemporary standards-all contributing to sustained demand for product innovation, certification, and lifecycle support.Over 85% of industrial and infrastructure projects globally are governed by mandatory regulatory and safety compliance frameworks. Approximately 75% of construction and industrial firms allocate 10-20% of project budgets to compliance and safety measures. More than 90% of infrastructure projects undergo routine inspections to meet occupational safety and environmental standards. Around 70% of workplace accidents in industrial settings have been reduced due to stricter safety protocols. Global demand for compliance management solutions in these sectors is growing at a CAGR of over 12%. Over 60 countries have upgraded or introduced new regulatory codes for infrastructure safety in the past five years.

Key Market Challenges

High Cost of Advanced Earthing Systems and Limited Adoption in Price-Sensitive Markets

One of the primary challenges confronting the earthing equipment market is the high cost associated with advanced and customized grounding systems, which significantly limits their adoption, especially in developing and price-sensitive markets. As industries evolve toward more complex electrical infrastructure and automation, the need for robust and technically sophisticated earthing solutions increases. However, many of these advanced systems-such as chemical earthing, copper-bonded rods, and integrated fault-detection systems-come with a high initial cost, both in terms of materials and installation.

This cost becomes a major hurdle in cost-driven sectors such as small-scale manufacturing, residential construction, and rural electrification programs, where budgets are often tight and cost-cutting measures are prevalent. Moreover, while earthing is a safety-critical requirement, it is often viewed as a non-revenue-generating investment, leading to reduced prioritization during planning and procurement phases. This mindset further diminishes the willingness to invest in higher-quality, durable grounding systems that offer long-term benefits. Additionally, in regions where awareness about proper grounding practices is low, users may opt for substandard or locally assembled alternatives that do not meet performance or safety standards, thereby undermining the growth of formal market participants.

Compounding this challenge is the difficulty in demonstrating immediate ROI for high-end earthing solutions, especially in environments where equipment failure due to earthing issues is infrequent or poorly documented. Installation complexities, logistical challenges in remote areas, and lack of skilled labor for proper implementation further inflate the cost and risk of adoption. In certain industries, especially those operating under tight regulatory constraints, delays and uncertainties around certification, safety audits, and compliance also discourage companies from upgrading to newer technologies.

Collectively, these financial, behavioral, and logistical barriers form a substantial impediment to the wider adoption of advanced earthing systems, particularly in regions that hold significant market potential due to infrastructure growth but lack the economic flexibility to absorb high upfront costs. For manufacturers and service providers, addressing this challenge may require a shift toward cost-effective, modular designs, flexible pricing models, and extensive training programs to promote awareness and increase trust in long-term performance outcomes. Unless these cost-related and perception-based issues are effectively managed, the market for high-performance earthing equipment is likely to remain constrained in several high-growth but cost-sensitive segments.

Key Market Trends

Increasing Focus on Safety, Compliance, and Standardization

Occupational safety and regulatory compliance have become paramount drivers in the earthing equipment market, reflecting broader industrial health & safety mandates and growing concern over electrical hazards in industrial, utility, and infrastructure settings. As governments and standards organizations-particularly in regions like Europe, North America, and Asia Pacific-tighten regulations around electrical grounding, earthing equipment manufacturers are innovating to meet increasingly rigorous technical requirements and certification thresholds. In heavy industries such as oil & gas, petrochemical, mining, and power generation, workplace incidents related to stray voltages or ground faults can lead to costly downtime, equipment damage, and serious injury.

In response, end users are transitioning from basic static grounding rods or simple strap systems to advanced modular earthing solutions featuring real-time monitoring, fault detection, durable construction, and ease of use. Standardization efforts are also intensifying: major industry bodies are publishing updated specifications for grounding resistance values, maintenance intervals, and inspection protocols. Manufacturers are responding with comprehensive product offerings that conform to these enhanced technical standards while minimizing total cost of ownership. Smart earthing equipment-featuring sensors, IoT connectivity, and wireless telemetry-enables remote diagnostics, condition-based maintenance, and data logging to demonstrate compliance to auditors and insurers.

Integrated systems using digital certificates, QR-code traceability, and version-controlled firmware further facilitate audits. Meanwhile, global trade has encouraged harmonized testing protocols (e.g., CE marking, IEC standards, UL listings), enabling manufacturers to export compliant earthing solutions with minimal adaptation at the country level. As a result, customers in diverse geographies-including developing economies building out industrial infrastructure-are increasingly prioritizing certified, pre-qualified ground protection systems backed by vendor warranties, traceability, and aftermarket service capabilities. This trend elevates product differentiation: vendors that can deliver turnkey grounding kits combining conductive paths, surge protection, bonding straps, and smart monitoring devices, backed by training, calibration, and maintenance services, stand to capture significant share.

Crucially, this shift toward compliance-driven procurement also promotes recurring revenue through service contracts, spare parts sales, and compliance software modules, enabling manufacturers to transition from commodity-oriented sales to subscription-style business models. As global concerns about ESG (Environmental, Social, Governance) intensify, enterprises are held more accountable for workplace safety records; investing in best-in-class earthing solutions becomes both a risk mitigation and reputational strategy. In summary, the dual pressures of regulatory crackdown and enterprise risk awareness are transforming earthing equipment from a basic infrastructure necessity into a value-added service ecosystem-encouraging innovation in certification-backed, smart, traceable, and service-supported product portfolios.

Key Market Players

• ABB Ltd.
• Siemens AG
• Schneider Electric SE
• Harger Lightning & Grounding
• Pentair plc
• Crompton Greaves Ltd.
• Eaton Corporation plc
• Mersen Group
• OBO Bettermann GmbH & Co. KG
• Raychem RPG Pvt. Ltd.

Report Scope:

In this report, the Global Earthing Equipment Market has been segmented into the following categories, in addition to the industry trends which have also been detailed below:

Earthing Equipment Market, By Product:

• MS Earthing Flat
• GI Earthing Flat
• CI Earthing Flat

Earthing Equipment Market, By End-User:

• Industrial
• Commercial
• Residential

Earthing Equipment Market, By Region:

• North America
  • United States
  • Canada
  • Mexico
• Europe
  • France
  • United Kingdom
  • Italy
  • Germany
  • Spain
• Asia-Pacific
  • China
  • India
  • Japan
  • Australia
  • South Korea
• South America
  • Brazil
  • Argentina
  • Colombia
• Middle East & Africa
  • South Africa
  • Saudi Arabia
  • UAE
  • Kuwait
  • Turkey

Competitive Landscape

Company Profiles: Detailed analysis of the major companies presents in the Global Earthing Equipment Market.

Available Customizations:

Global Earthing Equipment Market report with the given Market data, Tech Sci Research offers customizations according to a company's specific needs. The following customization options are available for the report:

Company Information

• Detailed analysis and profiling of additional Market players (up to five).

Table of Contents

1. Product Overview

• 1.1. Market Definition
• 1.2. Scope of the Market
  • 1.2.1. Markets Covered
  • 1.2.2. Years Considered for Study
• 1.3. Key Market Segmentations

2. Research Methodology

• 2.1. Objective of the Study
• 2.2. Baseline Methodology
• 2.3. Formulation of the Scope
• 2.4. Assumptions and Limitations
• 2.5. Sources of Research
  • 2.5.1. Secondary Research
  • 2.5.2. Primary Research
• 2.6. Approach for the Market Study
  • 2.6.1. The Bottom-Up Approach
  • 2.6.2. The Top-Down Approach
• 2.7. Methodology Followed for Calculation of Market Size & Market Shares
• 2.8. Forecasting Methodology
  • 2.8.1. Data Triangulation & Validation

3. Executive Summary

• 3.1. Overview of the Market
• 3.2. Overview of Key Market Segmentations
• 3.3. Overview of Key Market Players
• 3.4. Overview of Key Regions/Countries
• 3.5. Overview of Market Drivers, Challenges, and Trends

4. Voice of Customer

5. Global Earthing Equipment Market Outlook

• 5.1. Market Size & Forecast
  • 5.1.1. By Value
• 5.2. Market Share & Forecast
  • 5.2.1. By Product (MS Earthing Flat, GI Earthing Flat, and CI Earthing Flat)
  • 5.2.2. By End-User (Industrial, Commercial, and Residential)
  • 5.2.3. By Region
• 5.3. By Company (2024)
• 5.4. Market Map

6. North America Earthing Equipment Market Outlook

• 6.1. Market Size & Forecast
  • 6.1.1. By Value
• 6.2. Market Share & Forecast
  • 6.2.1. By Product
  • 6.2.2. By End-User
  • 6.2.3. By Country
• 6.3. North America: Country Analysis
  • 6.3.1. United States Earthing Equipment Market Outlook
    • 6.3.1.1. Market Size & Forecast
      • 6.3.1.1.1. By Value
    • 6.3.1.2. Market Share & Forecast
      • 6.3.1.2.1. By Product
      • 6.3.1.2.2. By End-User
  • 6.3.2. Canada Earthing Equipment Market Outlook
    • 6.3.2.1. Market Size & Forecast
      • 6.3.2.1.1. By Value
    • 6.3.2.2. Market Share & Forecast
      • 6.3.2.2.1. By Product
      • 6.3.2.2.2. By End-User
  • 6.3.3. Mexico Earthing Equipment Market Outlook
    • 6.3.3.1. Market Size & Forecast
      • 6.3.3.1.1. By Value
    • 6.3.3.2. Market Share & Forecast
      • 6.3.3.2.1. By Product
      • 6.3.3.2.2. By End-User

7. Europe Earthing Equipment Market Outlook

• 7.1. Market Size & Forecast
  • 7.1.1. By Value
• 7.2. Market Share & Forecast
  • 7.2.1. By Product
  • 7.2.2. By End-User
  • 7.2.3. By Country
• 7.3. Europe: Country Analysis
  • 7.3.1. Germany Earthing Equipment Market Outlook
    • 7.3.1.1. Market Size & Forecast
      • 7.3.1.1.1. By Value
    • 7.3.1.2. Market Share & Forecast
      • 7.3.1.2.1. By Product
      • 7.3.1.2.2. By End-User
  • 7.3.2. United Kingdom Earthing Equipment Market Outlook
    • 7.3.2.1. Market Size & Forecast
      • 7.3.2.1.1. By Value
    • 7.3.2.2. Market Share & Forecast
      • 7.3.2.2.1. By Product
      • 7.3.2.2.2. By End-User
  • 7.3.3. Italy Earthing Equipment Market Outlook
    • 7.3.3.1. Market Size & Forecast
      • 7.3.3.1.1. By Value
    • 7.3.3.2. Market Share & Forecast
      • 7.3.3.2.1. By Product
      • 7.3.3.2.2. By End-User
  • 7.3.4. France Earthing Equipment Market Outlook
    • 7.3.4.1. Market Size & Forecast
      • 7.3.4.1.1. By Value
    • 7.3.4.2. Market Share & Forecast
      • 7.3.4.2.1. By Product
      • 7.3.4.2.2. By End-User
  • 7.3.5. Spain Earthing Equipment Market Outlook
    • 7.3.5.1. Market Size & Forecast
      • 7.3.5.1.1. By Value
    • 7.3.5.2. Market Share & Forecast
      • 7.3.5.2.1. By Product
      • 7.3.5.2.2. By End-User

8. Asia-Pacific Earthing Equipment Market Outlook

• 8.1. Market Size & Forecast
  • 8.1.1. By Value
• 8.2. Market Share & Forecast
  • 8.2.1. By Product
  • 8.2.2. By End-User
  • 8.2.3. By Country
• 8.3. Asia-Pacific: Country Analysis
  • 8.3.1. China Earthing Equipment Market Outlook
    • 8.3.1.1. Market Size & Forecast
      • 8.3.1.1.1. By Value
    • 8.3.1.2. Market Share & Forecast
      • 8.3.1.2.1. By Product
      • 8.3.1.2.2. By End-User
  • 8.3.2. India Earthing Equipment Market Outlook
    • 8.3.2.1. Market Size & Forecast
      • 8.3.2.1.1. By Value
    • 8.3.2.2. Market Share & Forecast
      • 8.3.2.2.1. By Product
      • 8.3.2.2.2. By End-User
  • 8.3.3. Japan Earthing Equipment Market Outlook
    • 8.3.3.1. Market Size & Forecast
      • 8.3.3.1.1. By Value
    • 8.3.3.2. Market Share & Forecast
      • 8.3.3.2.1. By Product
      • 8.3.3.2.2. By End-User
  • 8.3.4. South Korea Earthing Equipment Market Outlook
    • 8.3.4.1. Market Size & Forecast
      • 8.3.4.1.1. By Value
    • 8.3.4.2. Market Share & Forecast
      • 8.3.4.2.1. By Product
      • 8.3.4.2.2. By End-User
  • 8.3.5. Australia Earthing Equipment Market Outlook
    • 8.3.5.1. Market Size & Forecast
      • 8.3.5.1.1. By Value
    • 8.3.5.2. Market Share & Forecast
      • 8.3.5.2.1. By Product
      • 8.3.5.2.2. By End-User

9. South America Earthing Equipment Market Outlook

• 9.1. Market Size & Forecast
  • 9.1.1. By Value
• 9.2. Market Share & Forecast
  • 9.2.1. By Product
  • 9.2.2. By End-User
  • 9.2.3. By Country
• 9.3. South America: Country Analysis
  • 9.3.1. Brazil Earthing Equipment Market Outlook
    • 9.3.1.1. Market Size & Forecast
      • 9.3.1.1.1. By Value
    • 9.3.1.2. Market Share & Forecast
      • 9.3.1.2.1. By Product
      • 9.3.1.2.2. By End-User
  • 9.3.2. Argentina Earthing Equipment Market Outlook
    • 9.3.2.1. Market Size & Forecast
      • 9.3.2.1.1. By Value
    • 9.3.2.2. Market Share & Forecast
      • 9.3.2.2.1. By Product
      • 9.3.2.2.2. By End-User
  • 9.3.3. Colombia Earthing Equipment Market Outlook
    • 9.3.3.1. Market Size & Forecast
      • 9.3.3.1.1. By Value
    • 9.3.3.2. Market Share & Forecast
      • 9.3.3.2.1. By Product
      • 9.3.3.2.2. By End-User

10. Middle East and Africa Earthing Equipment Market Outlook

• 10.1. Market Size & Forecast
  • 10.1.1. By Value
• 10.2. Market Share & Forecast
  • 10.2.1. By Product
  • 10.2.2. By End-User
  • 10.2.3. By Country
• 10.3. Middle East and Africa: Country Analysis
  • 10.3.1. South Africa Earthing Equipment Market Outlook
    • 10.3.1.1. Market Size & Forecast
      • 10.3.1.1.1. By Value
    • 10.3.1.2. Market Share & Forecast
      • 10.3.1.2.1. By Product
      • 10.3.1.2.2. By End-User
  • 10.3.2. Saudi Arabia Earthing Equipment Market Outlook
    • 10.3.2.1. Market Size & Forecast
      • 10.3.2.1.1. By Value
    • 10.3.2.2. Market Share & Forecast
      • 10.3.2.2.1. By Product
      • 10.3.2.2.2. By End-User
  • 10.3.3. UAE Earthing Equipment Market Outlook
    • 10.3.3.1. Market Size & Forecast
      • 10.3.3.1.1. By Value
    • 10.3.3.2. Market Share & Forecast
      • 10.3.3.2.1. By Product
      • 10.3.3.2.2. By End-User
  • 10.3.4. Kuwait Earthing Equipment Market Outlook
    • 10.3.4.1. Market Size & Forecast
      • 10.3.4.1.1. By Value
    • 10.3.4.2. Market Share & Forecast
      • 10.3.4.2.1. By Product
      • 10.3.4.2.2. By End-User
  • 10.3.5. Turkey Earthing Equipment Market Outlook
    • 10.3.5.1. Market Size & Forecast
      • 10.3.5.1.1. By Value
    • 10.3.5.2. Market Share & Forecast
      • 10.3.5.2.1. By Product
      • 10.3.5.2.2. By End-User

11. Market Dynamics

• 11.1. Drivers
• 11.2. Challenges

12. Market Trends & Developments

• 12.1. Merger & Acquisition (If Any)
• 12.2. Product Launches (If Any)
• 12.3. Recent Developments

13. Company Profiles

• 13.1. ABB Ltd.
  • 13.1.1. Business Overview
  • 13.1.2. Key Revenue and Financials
  • 13.1.3. Recent Developments
  • 13.1.4. Key Personnel/Key Contact Person
  • 13.1.5. Key Product/Services Offered
• 13.2. Siemens AG
• 13.3. Schneider Electric SE
• 13.4. Harger Lightning & Grounding
• 13.5. Pentair plc
• 13.6. Crompton Greaves Ltd.
• 13.7. Eaton Corporation plc
• 13.8. Mersen Group
• 13.9. OBO Bettermann GmbH & Co. KG
• 13.10. Raychem RPG Pvt. Ltd.

14. Strategic Recommendations

15. About Us & Disclaimer