![]() |
市場調查報告書
商品編碼
1766050
2032 年牙科空氣拋光設備市場預測:按產品、範圍、應用、最終用戶和地區進行的全球分析Dental Air Polishing Unit Market Forecasts to 2032 - Global Analysis By Product (Cord Air Polishing Unit, Cordless Air Polishing Unit, Hand Held Air Polishing Unit and Table Top Air Polishing Unit), Range, Application, End User and By Geography |
根據 Stratistics MRC 的數據,全球牙科氣動拋光設備市場預計在 2025 年將達到 7.493 億美元,到 2032 年將達到 11.875 億美元,預測期內的複合年成長率為 6.8%。
牙科氣動拋光機是一種用於口腔衛生的裝置,可利用高速氣流、水流和細小的研磨粉去除牙齒上的污漬、牙菌斑和生物膜。與傳統的潔治相比,它們的研磨性更低,帶來更溫和的清潔體驗。此系統可提高患者的舒適度,並提高牙齒預防的效率。它們常用於專業潔治,有助於預防蛀牙和牙周病,同時確保牙齒表面光潔光滑。
調查顯示,78% 的牙科專業人員在實踐中使用空氣磨蝕技術,因為它能有效去除斑塊並讓患者感到舒適。
提高預防性口腔清潔用品意識
預防性口腔清潔用品意識的不斷提升極大地推動了牙科氣動磨牙機市場的發展。患者正在尋求非侵入性清潔方法,以獲得更好的口腔衛生效果。氣動磨牙機能夠有效去除牙菌斑和污漬,因此越來越受歡迎。牙齦炎等牙科問題的增加也刺激了市場需求。教育宣傳活動鼓勵人們定期進行牙科檢查,從而支持了市場的成長。氣動磨牙機的技術進步正在提高治療效果。美容牙科的興起也進一步加速了這些設備的普及。
設備成本高
牙科噴砂設備成本高昂,限制了市場擴張。先進的設備需要巨額投資,這限制了小型診所的採用。維護和耗材成本也加重了財務負擔。高成本阻礙了精打細算的牙科診所升級設備。噴砂治療的報銷政策有限,影響了盈利。專業培訓的需求增加了營運成本。這些成本障礙正在減緩市場滲透。
開發可攜式且價格實惠的設備
攜帶式且價格實惠的氣動拋光設備的開發創造了發展機會。緊湊的設計使其能夠輕鬆整合到小型牙科診所。經濟高效的型號吸引了新的市場進入者並擴大了市場覆蓋範圍。輕量材料創新顯著降低了製造成本。可攜式設備提高了行動牙科護理服務的可近性。對便捷牙科護理解決方案的需求不斷成長,推動了成長。這些進步在服務不足的地區開闢了新的市場。
與超音波潔治儀的競爭
超音波潔治機的競爭威脅著牙科氣動拋光機市場。超音波設備在某些牙齒狀況下清潔速度較快。由於其在牙科診所的穩固地位,市場佔有率面臨挑戰。部分超音波機型價格低廉,吸引了對成本敏感的牙科診所。超音波設備的多功能性也吸引了多專科診所。人們對氣動拋光益處的認知度較低,阻礙了其廣泛應用。這種競爭減緩了某些細分市場的成長。
新冠疫情嚴重擾亂了牙科空氣拋光設備市場。封鎖措施導致牙科診所關閉,減少了對設備的需求。非緊急牙科手術的延誤影響了空氣拋光設備的銷售。供應鏈問題導致關鍵設備零件短缺。然而,衛生意識的增強推動了口腔清潔用品設備的需求。遠距牙科的興起支撐了市場的持續成長。疫情後牙科保健服務的復甦,重新激發了市場的成長。
有線氣動拋光設備市場預計將在預測期內佔據最大佔有率。
有線氣動拋光機預計將在預測期內佔據最大的市場佔有率。其可靠性和穩定的電源確保了不間斷的性能。有線設備是高流量牙科診所的首選。與無線設備相比,其成本效益推動了該細分市場的成長。該細分市場受益於其在成熟診所的廣泛應用。先進的有線設計提供了更高的精度和控制力。此細分市場的主導地位源自於其在牙科診所環境中久經考驗的可靠性。
預計預測期內牙齒清洗和預防領域將以最高的複合年成長率成長。
由於口腔衛生意識的增強、對預防性牙科護理的重視以及牙周病發病率的上升,預計牙齒清洗和預防細分市場將在預測期內實現最高成長。老年人口的成長以及頻繁的牙科維護和清潔就診進一步推動了市場的成長。超音波刮器和拋光設備的技術進步,以及患者日益成長的美學意識,繼續推動這些服務的普及,從而保持了市場的成長勢頭。
預計亞太地區將在預測期內佔據最大的市場佔有率。中國和印度日益成長的牙科意識正在推動需求成長。該地區人口眾多,因此對牙科服務的需求也不斷成長。政府在口腔衛生方面的措施正在推動市場成長。該地區日益成長的牙科旅遊業將支撐設備的銷售。領先的牙科設備製造商的存在增強了市場。強大的醫療基礎設施增強了該地區的優勢。
預計北美地區在預測期內的複合年成長率最高。美國先進的牙科基礎設施正在推動牙科應用的快速普及。美容牙科的高需求正在推動市場擴張。空氣磨蝕技術的創新吸引了領先的牙科診所。強大的報銷激勵措施支持了該地區的設備採購。對預防性口腔清潔用品的關注正在推動市場成長。北美成熟的牙科行業確保了市場的快速成長。
According to Stratistics MRC, the Global Dental Air Polishing Unit Market is accounted for $749.3 million in 2025 and is expected to reach $1187.5 million by 2032 growing at a CAGR of 6.8% during the forecast period. A dental air polishing unit is a device used in oral hygiene to remove stains, plaque, and biofilm from teeth using a high-speed stream of air, water, and fine abrasive powder. It is less abrasive than traditional scaling, offering a gentler cleaning experience. This system enhances patient comfort and improves efficiency in dental prophylaxis. Commonly used in professional cleanings, it helps prevent cavities and gum disease while ensuring a polished, smooth tooth surface.
According to the survey, 78% of dental professionals use air polishing as a part of their practice, due to its effectiveness in plaque removal and patient comfort.
Growing awareness of preventive oral care
Increasing awareness of preventive oral care significantly drives the Dental Air Polishing Unit market. Patients demand non-invasive cleaning methods for better oral health outcomes. Air polishing units offer efficient plaque and stain removal, boosting popularity. Rising cases of dental issues like gingivitis fuel market demand. Educational campaigns promote regular dental check-ups, supporting market growth. Technological advancements in air polishing units enhance treatment effectiveness. Growing aesthetic dentistry trends further accelerate adoption of these devices.
High equipment costs
The high cost of dental air polishing units restricts market expansion. Advanced units require significant investment, limiting adoption by smaller practices. Maintenance and consumable expenses add to the financial burden. High costs deter budget-conscious dental clinics from upgrading equipment. Limited reimbursement policies for air polishing procedures impact profitability. The need for specialized training increases operational costs. These cost barriers slow market penetration in developing regions.
Development of portable & affordable units
The development of portable and affordable air polishing units creates market opportunities. Compact designs enable easier integration into smaller dental practices. Cost-effective models attract new market entrants, expanding reach. Innovations in lightweight materials reduce manufacturing costs significantly. Portable units enhance accessibility for mobile dental services. Rising demand for convenient dental care solutions drives growth. These advancements open new markets in underserved regions.
Competition from ultrasonic scaling devices
Competition from ultrasonic scaling devices threatens the Dental Air Polishing Unit market. Ultrasonic devices offer faster cleaning for certain dental conditions. Their established presence in dental practices challenges market share. Lower costs of some ultrasonic models attract cost-sensitive clinics. The versatility of ultrasonic devices appeals to multi-specialty practices. Limited awareness of air polishing benefits hinders adoption. This competition slows growth in certain market segments.
The COVID-19 pandemic disrupted the Dental Air Polishing Unit market significantly. Lockdowns led to the closure of dental clinics, reducing equipment demand. Delayed non-emergency dental procedures impacted air polishing unit sales. Supply chain issues caused shortages of critical device components. However, heightened hygiene awareness boosted demand for oral care equipment. The rise of tele-dentistry supported continued market engagement. Post-pandemic recovery in dental services restored market growth.
The cord air polishing unit segment is expected to be the largest during the forecast period
The cord air polishing unit segment is expected to account for the largest market share during the forecast period. Its reliability and consistent power supply ensure uninterrupted performance. Corded units are preferred for high-volume dental practices. Cost-effectiveness compared to cordless models drives segment growth. The segment benefits from widespread use in established clinics. Advanced corded designs offer enhanced precision and control. Its dominance is driven by proven reliability in dental settings.
The dental cleaning & prophylaxis segment is expected to have the highest CAGR during the forecast period
Over the forecast period, the dental cleaning & prophylaxis segment is predicted to witness the highest growth driven by awareness about oral hygiene, increasing emphasis on preventive dental care, and growing incidences of periodontal diseases. The expanding geriatric population coupled with frequent dental visits for maintenance and cleaning procedures further fuels market expansion. Technological advancements in ultrasonic scalers and polishing devices, along with heightened aesthetic concerns among patients, continue to enhance service adoption, thereby driving sustained market momentum.
During the forecast period, the Asia Pacific region is expected to hold the largest market share. Rising dental care awareness in China and India drives demand. The region's large population increases the need for dental services. Government initiatives for oral health boost market growth. Expanding dental tourism in the region supports equipment sales. The presence of major dental equipment manufacturers strengthens the market. Robust healthcare infrastructure enhances the region's dominance.
Over the forecast period, the North America region is anticipated to exhibit the highest CAGR, Advanced dental infrastructure in the U.S. drives rapid adoption. High demand for cosmetic dentistry fuels market expansion. Innovations in air polishing technology attract leading dental practices. Strong reimbursement policies support equipment purchases in the region. The focus on preventive oral care accelerates growth. North America's established dental industry ensures rapid market growth.
Key players in the market
Some of the key players in Dental Air Polishing Unit Market include Woodpecker, EMS, Planmeca, NSK, Bien Air, Dentsply Sirona, Anthogyr, Morita, A-dec, 3M, SDI, KaVo Kerr, Sirona, Acteon Group, W&H Dentalwerk, Dentamerica, Inc., Hu-Friedy, Ultradent Products Inc., Durr Dental, and Ivoclar Vivadent.
In June 2025, Dentsply Sirona launched the ProphyAir 360, a cordless air polisher with 3x faster stain removal and 50% less aerosol dispersion. Its ergonomic design enhances patient comfort, targeting busy dental practices. The system's efficiency strengthens Dentsply Sirona's leadership in dental technology.
In May 2025, 3M introduced ESPE AirFlow+, a biocompatible powder system for air polishing. Designed for sensitive patients, it minimizes discomfort while ensuring effective stain removal. Its eco-friendly formulation aligns with 3M's sustainability goals, appealing to modern dental clinics.
In April 2025, KaVo Kerr unveiled SonicClean Pro, combining air polishing and ultrasonic scaling in a handheld device. Its dual functionality streamlines procedures, saving 20% chair time. Targeting advanced dental practices, it enhances KaVo Kerr's reputation for innovative dental solutions.
Note: Tables for North America, Europe, APAC, South America, and Middle East & Africa Regions are also represented in the same manner as above.