查看購物車
  • English
  • Japanese
封面
市場調查報告書
商品編碼
2114720

混凝土黏合劑：市場佔有率分析、行業趨勢和統計數據、成長預測（2026-2031）

Concrete Bonding Agent - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2026 - 2031)
出版日期: | 出版商: Mordor Intelligence | 英文 120 Pages | 商品交期: 2-3個工作天內

價格

※ 本網頁內容可能與最新版本有所差異。詳細情況請與我們聯繫。

簡介目錄

根據 Mordor Intelligence 預測，混凝土黏合劑的市場規模預計將從 2025 年的 548 萬噸成長到 2026 年的 579 萬噸，然後從 2026 年到 2031 年以 5.62% 的複合年成長率成長，到 2031 年達到 761 萬噸。

混凝土黏結劑市場-IMG1

本報告按黏合劑類型（水泥基乳膠和環氧樹脂）、技術（單組分和雙組分體系）​​、應用（修補、地板材料等）、終端用戶產業（住宅和非住宅）以及地區（亞太地區、北美地區、歐洲地區、南美地區以及中東和非洲地區）進行細分。市場預測以噸為單位。

全球混凝土黏合劑市場趨勢與洞察

混凝土維修和維修工程激增。

六、七十年代修建的道路、橋樑和防洪大壩等基礎設施，如今正面臨劣化，因為這些設施已接近使用壽命終點，因此地方政府優先考慮維修，以延長其使用壽命20至30年。紐約第三大道橋的案例表明，採用乳膠改質混凝土進行有針對性的加固，可以將橋樑的耐久性延長50年，而成本僅為更換成本的五分之一。各機構正在採用資產管理方案，量化整個生命週期的成本。在這些模型中，先進的黏合劑始終優於普通修補砂漿，因為黏合力差會導致重做。保險公司也加入了這一行列，許多公司現在要求在批准高成本橋樑和隧道的保險之前，提供介面測試結果證明。隨著業主採納這些規範，混凝土黏合劑市場在公共和私人專案中的目標基本客群也不斷擴大。

城市基礎設施維修的需求正在迅速成長。

從孟買到馬尼拉，各大城市正在進行交通走廊的維修，以提高其抗災能力並緩解交通堵塞。這項計劃透過官民合作關係（PPP）模式進行融資，並設有嚴格的運作指標。由於維修工程在交通繁忙的區域進行，承包商傾向於使用快速硬化、可黏附於潮濕基材且與波特蘭水泥相容的黏合劑，以便普通工人進行施工。中國的「2025」政策文件將重點從新建高速公路轉向加固現有結構以應對地震和洪水風險。這種需求模式的轉變促使人們更傾向於使用富含聚合物的配方，這類配方能夠在不改變混凝土熱膨脹性能的前提下提高其抗彎強度。據供應商稱，專為地鐵和高架鐵路橋樑夜間維護作業而設計的噴塗丙烯酸產品的銷售量正呈現兩位數成長。

環氧樹脂和乳膠原料價格波動

苯乙烯-丁二烯橡膠和雙酚A環氧樹脂依賴石油衍生原料，其價格受煉油廠維護和地緣政治不穩定的影響而波動。 2024年，高性能乳膠的價格達到每噸1,654美元，在低價競標的市場環境下，這擠壓了承包商的利潤空間。在新興市場，原物料價格飆漲往往導致採購成本超出預算，進而造成橋面鋪面工程延期。為了規避風險，複合材料生產商正在探索使用腰果殼液衍生的生物基環氧樹脂，但其生產仍處於起步階段，成本隨作物產量波動。期貨合約可以提供一定的緩解，但這需要小規模經銷商缺乏的雄厚資金基礎。因此，這些價格波動正在抑制混凝土黏合劑市場中對價格敏感的細分領域的短期銷售量成長。

細分市場分析

與水泥相容的乳膠改質黏合劑預計到2025年將佔混凝土黏合劑市場53.62%的銷售量，佔市場最大佔有率。該細分市場正以6.39%的複合年成長率成長，不僅佔據市場主導地位，而且是成長最快的類別。這種獨特的雙重優點源自於乳膠的化學特性，它兼顧了良好的可加工性和機械強度。掃描電子顯微鏡觀察證實，乳膠改質黏合劑能夠形成3D聚合物薄膜，填補空隙並抑制微裂紋的擴展。維吉尼亞州交通部的現場數據顯示，乳膠改質黏合劑的使用壽命為22-26年，而未改質黏合劑的使用壽命僅為15-19年。環氧樹脂基產品在化學腐蝕性強、結構要求高的環境（例如污水處理廠進水口和海上平台）中保持強大的市場地位。

性能因素會影響採購策略。乳膠基產品具有高延伸率，可減輕寬幅混凝土板因熱循環造成的應力集中；而環氧樹脂基產品則在需要極強剪切傳遞的受壓區域表現優異。儘管揮發性有機化合物 (VOC) 法規推動了水性乳膠的應用，但新一代低氣味環氧樹脂旨在重新平衡這一趨勢。供應商正擴大將這兩種化學體系融入模組化設計中，使承包商能夠將乳膠底漆與環氧樹脂面漆結合使用，從而最佳化黏合性和耐化學性。這種混合方法在不增加庫存單位 (SKU) 管理複雜性的前提下，為客戶提供了規格方面的柔軟性，從而拓展了混凝土黏合劑市場。

預計2025年，單組分產品將佔出貨量的64.05%，仍將是日常維修和地面找平作業的主要選擇。這些預混液體或粉末只需加水或機械攪拌即可使用，最大限度地減少了現場操作誤差。雙組分產品雖然僅佔出貨量的35.95%，但由於其超過3兆帕的高黏合強度以及能夠承受高流量高架橋上的反覆荷載，正以6.18%的複合年成長率穩步成長。這種差異反映了用戶細分：小規模承包商更傾向於便捷的單包裝解決方案，而基礎設施專家則會預留額外的人事費用以確保混合精度。

創新正在縮小這些勞力密集生產環節的差距。目前，鋁箔包裝的膠筒可將樹脂和固化劑分開，直到現場擠出到靜態混合器中，從而縮短30%的準備時間，同時減少廢棄物。快速固化的雙組分環氧樹脂可在1小時內達到交通安全強度，這對於繁忙機場的夜間跑道板維修來說是一項巨大的優勢。同時，配備感測器的包裝（可在混合不完全時改變顏色）可能很快就會從高階產品過渡到中端產品。隨著這些功能的普及，雙組分產品的採用將會加速，即使銷售量仍然不高，混凝土黏合劑市場的以金額為準也將進一步成長。

區域分析

預計到2025年，亞太地區將佔全球混凝土黏合劑市場出貨量的46.55%，並在2031年之前以6.12%的複合年成長率成長，這將擴大中國、印度、印尼和菲律賓等國的混凝土黏合劑市場規模。儘管中國的基礎設施建設支出成長放緩，但目前的重點已轉向抗震加固和減少碳排放，這就需要高性能黏合劑，能夠在不影響黏合性能的前提下摻入再生骨材。在印度，加蒂沙克蒂走廊計畫正在加速推進，2024/25會計年度的預算撥款高達1,340億美元，這迫使建築商採用快速固化底漆，以便在一夜之間恢復道路交通。

北美仍然是技術的試驗場，這得益於1.2兆美元的《基礎設施投資與就業法案》，該法案為橋樑維修、大壩洩洪道擴建和港口泊位加固提供了資金。 2024年，加州空氣資源委員會將建築黏合劑的揮發性有機化合物（VOC）限值降低至30克/公升，鼓勵供應商轉向水性分散型和高固態環氧樹脂混合物。 Progressive Epoxy Polymers公司推出了一種可在度C5度下固化的無溶劑甲板覆蓋層，目標應用範圍是美國中西部北部地區的冬季維護期。

歐洲擁有成熟的使用者群體，他們對排放標準和結構性能有嚴格的要求。英國通用預拌混凝土出貨量下降17.4%，主要原因是市場轉向使用工廠認證的、具有特定黏結劑-聚合物比例的客製化修補砂漿。聖戈班福斯羅克目前在英國和阿拉伯聯合大公國擁有生產設施，使其能夠將歐洲的專業技術應用於沿岸地區需要阻燃環氧底漆的石化工廠維修專案。南歐的抗震加固計畫需要高黏度觸變性黏合劑，這種黏合劑能夠牢固地黏附在垂直柱體上而不會下垂，而義大利的研究機構在該領域的複合技術進步方面處於領先地位。雖然南美和中東/非洲地區的整體銷售落後於歐洲，但部分地區的成長率卻達到了兩位數。在巴西港口特許經營維修中，吊車軌道下方正在使用高聚合物水泥漿。這些特定地區的技術需求正在擴大混凝土黏合劑市場的應用範圍。

其他好處：

  • Excel格式的市場預測（ME）表
  • 3個月的分析師支持

目錄

第1章：引言

  • 研究假設和市場定義
  • 調查範圍

第2章：調查方法

第3章執行摘要

第4章 市場狀況

  • 市場概覽
  • 市場促進因素
    • 混凝土維修和維修工程激增。
    • 需要快速發展城市基礎建設。
    • 與波特蘭水泥和混合水泥的相容性
    • 預拌修補砂漿的廣泛應用。
    • 對含奈米二氧化矽的黏合劑的需求日益成長
  • 市場限制因素
    • 環氧樹脂和乳膠原料價格波動
    • 新興市場承包商意識較低
    • 對聚合物分散體的碳足跡進行審查
  • 價值鏈分析
  • 波特五力模型

第5章 市場規模與成長預測

  • 黏合劑
    • 水泥基乳膠
    • 環氧樹脂
  • 透過技術
    • 單組分類型
    • 雙組分系統
  • 透過使用
    • 維修
    • 地板材料
    • 裝飾性的
    • 其他用途（防水、防潮等）
  • 按最終用戶行業分類
    • 住宅
    • 非住宅
  • 按地區
    • 亞太地區
      • 中國
      • 日本
      • 印度
      • 韓國
      • 東南亞國協
      • 其他亞太國家
    • 北美洲
      • 美國
      • 加拿大
      • 墨西哥
    • 歐洲
      • 德國
      • 英國
      • 法國
      • 義大利
      • 西班牙
      • 俄羅斯
      • 北歐國家
      • 其他歐洲國家
    • 南美洲
      • 巴西
      • 阿根廷
      • 其他南美國家
    • 中東和非洲
      • 沙烏地阿拉伯
      • 南非
      • 其他中東和非洲國家

第6章 競爭情勢

  • 市場集中度
  • 策略趨勢
  • 市佔率和排名分析
  • 公司簡介
    • Ardex Group
    • ChemCo Systems Inc.
    • Garon Products Inc.
    • Henkel AG & Co. KGaA
    • MAPEI SpA
    • Meridian Adhesives Group
    • Pidilite Industries Limited
    • RPM International Inc.
    • Saint-Gobain
    • Sika AG
    • The Euclid Chemical Company
    • WR Grace & Co

第7章 市場機會與未來展望

簡介目錄
Product Code: 68456

According to Mordor Intelligence, the concrete bonding agent market size is expected to grow from 5.48 Million tons in 2025 to 5.79 Million tons in 2026 and is forecast to reach 7.61 Million tons by 2031 at 5.62% CAGR over 2026-2031.

Concrete Bonding Agent - Market - IMG1

This report is Segmented by Bonding Agent Type (Cementitious Latex-Based and Epoxy-Based), Technology (One-Component and Two-Component Systems), Application (Repairing, Flooring, and More), End-User Industry (Residential and Non-Residential), and Geography (Asia-Pacific, North America, Europe, South America, and Middle East and Africa). The Market Forecasts are Provided in Terms of Volume (tons).

Global Concrete Bonding Agent Market Trends and Insights

Surge in Concrete Repair & Rehabilitation Projects

Municipal agencies that built roads, bridges, and flood-control dams in the 1960s and 1970s now face end-of-life deterioration, so they prioritize rehabilitation that can extend service lives by 20-30 years . The Third Avenue Bridge case in New York proved that targeted overlays using latex-modified concrete can add five decades of durability at one-fifth the replacement cost. Agencies adopt asset-management protocols that quantify whole-life cost, and those models consistently rank advanced bonding agents ahead of basic patching mortars because adhesion failure leads to rework. Insurance underwriters also weigh in; many now require documented interface testing before they approve coverage for capital-intensive bridges and tunnels. As owners embed such specifications, the concrete bonding agents market keeps widening its addressable base across both public and private portfolios.

Rapid Urban Infra-upgrading Mandates

Cities from Mumbai to Manila are retrofitting transport corridors to lift resilience scores and reduce congestion, an effort funded through public-private partnerships that stipulate strict uptime metrics. Because rehab work occurs in live traffic zones, contractors prefer bonding agents that cure fast, adhere to damp substrates, and remain compatible with Portland cement so that standard crews can handle installation. China's 2025 policy documents pivot away from adding greenfield highways toward reinforcing existing structures against seismic and flood risks. This reshaped demand pattern favors polymer-rich formulations that boost flexural strength without altering concrete's thermal expansion profile. Suppliers report double-digit sales growth in spray-applied acrylics designed for narrow nighttime maintenance windows on subways and elevated rail viaducts.

Price Volatility of Epoxy & Latex Feedstocks

Styrene-butadiene rubber and bisphenol-A-based epoxy rely on petroleum derivatives whose prices swing with refinery turnarounds and geopolitical disruptions. During 2024, high-performance latex reached USD 1,654 per ton, eroding contractor margins in low-bid environments. Emerging markets often delay bridge deck overlays when feedstock spikes push procurement beyond budget ceilings. To hedge risk, formulators explore bio-based epoxies derived from cashew nutshell liquid, yet scale remains nascent and costs vary with crop yields. Forward-buy contracts offer partial relief but require healthy balance sheets that smaller distributors lack. The volatility therefore curbs near-term volume growth in price-sensitive segments of the concrete bonding agents market.

Other drivers and restraints analyzed in the detailed report include:

  1. Compatibility With Portland & Blended Cements
  2. Proliferation of Ready-Mix Repair Mortars
  3. Low Contractor Awareness in Emerging Markets

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Latex-modified, cement-compatible agents accounted for 53.62% of 2025 volume, the largest slice within the Concrete Bonding Agents market share. The same cohort is on a 6.39% CAGR path, rendering it both the dominant and fastest-growing class. This rare dual positioning reflects latex chemistry that marries workability with mechanical uplift: scanning electron microscopy reveals three-dimensional polymer films that bridge voids and blunt micro-crack propagation. Field data from the Virginia Department of Transportation show 22-26 year service lives for latex overlays versus 15-19 years for unmodified systems. Epoxy-based products keep a firm presence in chemically aggressive or structurally critical environments such as wastewater headworks and offshore platforms.

Performance considerations steer procurement. Latex agents yield higher elongation, easing stress concentrations caused by thermal cycling on wide deck plates, whereas epoxies excel in compressive zones that demand extreme shear transfer. VOC regulation trends favor water-borne latex, yet next-generation low-odor epoxies aim to re-balance the equation. Suppliers increasingly bundle both chemistries in modular systems, letting contractors pair a latex primer with an epoxy topcoat to optimize adhesion and chemical resistance. This hybrid approach expands the concrete bonding agents market because owners get specification flexibility without adding stock keeping unit (SKU) complexity.

One-component products held 64.05% of 2025 shipments and remain the mainstay for everyday patching and floor screeding. These pre-mixed liquids or powders need only water or mechanical stirring, limiting job-site errors. Two-component kits, although just 35.95% by volume, show a brisk 6.18% CAGR because they unlock higher bond strengths above 3 MPa and resist cyclic loading on heavily trafficked viaducts. The differential speaks to user segmentation: smaller contractors gravitate to single-bag convenience, while infrastructure specialists budget extra labor time for mixing precision.

Innovation is trimming the hassle gap. Foil-pack cartridges now keep resin and hardener separate until on-site extrusion into static mixers, shaving set-up time by 30% while cutting waste. Rapid-cure two-component epoxies can hit traffic-ready strength in one hour, a boon for overnight runway slab repairs at busy airports. Meanwhile, sensor-enabled packaging that changes color when mixing is incomplete may soon migrate from premium to mid-tier price points. As such features spread, two-component adoption could accelerate, further expanding the concrete bonding agents market size in value terms even if unit volumes stay modest.

Complete Report Scope:

  • By Bonding Agent Type
    • Cementitious Latex-based
    • Epoxy-based
  • By Technology
    • One-component
    • Two-component Systems
  • By Application
    • Repairing
    • Flooring
    • Decorative
    • Other Applications (Waterproofing & Damp-proofing, etc.)
  • By End-User Industry
    • Residential
    • Non-Residential
  • By Geography
    • Asia-Pacific
      • China
      • Japan
      • India
      • South Korea
      • ASEAN Countries
      • Rest of Asia-Pacific
    • North America
      • United States
      • Canada
      • Mexico
    • Europe
      • Germany
      • United Kingdom
      • France
      • Italy
      • Spain
      • Russia
      • NORDIC Countries
      • Rest of Europe
    • South America
      • Brazil
      • Argentina
      • Rest of South America
    • Middle East and Africa
      • Saudi Arabia
      • South Africa
      • Rest of Middle East and Africa

Geography Analysis

Asia-Pacific anchored 46.55% of global market volume share in 2025 and is pacing toward a 6.12% CAGR through 2031, magnifying the Concrete Bonding Agents market footprint across China, India, Indonesia, and the Philippines. China's infrastructure outlays, while moderating, now emphasize seismic retrofits and carbon reduction, which require high-performance bonding agents to integrate recycled aggregates without compromising adhesion. India's USD 134 billion 2024/25 allocation accelerates projects under the Gati Shakti corridor, compelling contractors to adopt rapid-cure primers that can turn lanes back to traffic overnight.

North America remains a technology testbed, buoyed by the USD 1.2 trillion Infrastructure Investment and Jobs Act that channels funds into bridge rehabilitation, dam spillway enlargement, and port berth reinforcement. California's Air Resources Board tightened VOC caps to 30 g/L for architectural adhesives in 2024, nudging suppliers toward water-borne dispersion and higher-solids epoxy blends. Progressive Epoxy Polymers introduced a solvent-free deck overlay that cures at 5°C, aiming at winter-maintenance windows in the Upper Midwest.

Europe commands a sophisticated user base demanding tight emission profiles and proof-tested structural performance. The 17.4% drop in Great Britain's generic ready-mix deliveries masks a switch toward bespoke repair mortars with factory-certified binder-polymer ratios. Saint-Gobain-Fosroc now controls production nodes in the United Kingdom and United Arab Emirates, letting it funnel European know-how into Gulf petrochemical refurbishments that require fire-retardant epoxy primers. Southern Europe's seismic retrofit programs invite viscous thixotropic agents that cling to vertical columns without sag, an area where Italian labs drive formulation advances. South America and the Middle East & Africa trail in aggregate volume but post double-digit growth pockets. Brazil's port concession upgrades deploy polymer-rich grouts under crane rails. Such region-specific technical needs broaden adoption corridors for the Concrete Bonding Agents market.

  1. Ardex Group
  2. ChemCo Systems Inc.
  3. Garon Products Inc.
  4. Henkel AG & Co. KGaA
  5. MAPEI S.p.A.
  6. Meridian Adhesives Group
  7. Pidilite Industries Limited
  8. RPM International Inc.
  9. Saint-Gobain
  10. Sika AG
  11. The Euclid Chemical Company
  12. W. R. Grace & Co

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 Introduction

  • 1.1 Study Assumptions & Market Definition
  • 1.2 Scope of the Study

2 Research Methodology

3 Executive Summary

4 Market Landscape

  • 4.1 Market Overview
  • 4.2 Market Drivers
    • 4.2.1 Surge in Concrete Repair & Rehabilitation Projects
    • 4.2.2 Rapid Urban Infra-upgrading Mandates
    • 4.2.3 Compatibility With Portland & Blended Cements
    • 4.2.4 Proliferation of Ready-mix Repair Mortars
    • 4.2.5 Increasing Demand for Nano-silica-enhanced Bonding Chemistries
  • 4.3 Market Restraints
    • 4.3.1 Price Volatility of Epoxy & Latex Feedstocks
    • 4.3.2 Low Contractor Awareness in Emerging Markets
    • 4.3.3 Carbon-footprint Scrutiny of Polymer Dispersions
  • 4.4 Value Chain Analysis
  • 4.5 Porter's Five Forces
    • 4.5.1 Bargaining Power of Suppliers
    • 4.5.2 Bargaining Power of Buyers
    • 4.5.3 Threat of New Entrants
    • 4.5.4 Threat of Substitutes
    • 4.5.5 Degree of Competition

5 Market Size & Growth Forecasts (Volume)

  • 5.1 By Bonding Agent Type
    • 5.1.1 Cementitious Latex-based
    • 5.1.2 Epoxy-based
  • 5.2 By Technology
    • 5.2.1 One-component
    • 5.2.2 Two-component Systems
  • 5.3 By Application
    • 5.3.1 Repairing
    • 5.3.2 Flooring
    • 5.3.3 Decorative
    • 5.3.4 Other Applications (Waterproofing & Damp-proofing, etc.)
  • 5.4 By End-User Industry
    • 5.4.1 Residential
    • 5.4.2 Non-Residential
  • 5.5 By Geography
    • 5.5.1 Asia-Pacific
      • 5.5.1.1 China
      • 5.5.1.2 Japan
      • 5.5.1.3 India
      • 5.5.1.4 South Korea
      • 5.5.1.5 ASEAN Countries
      • 5.5.1.6 Rest of Asia-Pacific
    • 5.5.2 North America
      • 5.5.2.1 United States
      • 5.5.2.2 Canada
      • 5.5.2.3 Mexico
    • 5.5.3 Europe
      • 5.5.3.1 Germany
      • 5.5.3.2 United Kingdom
      • 5.5.3.3 France
      • 5.5.3.4 Italy
      • 5.5.3.5 Spain
      • 5.5.3.6 Russia
      • 5.5.3.7 NORDIC Countries
      • 5.5.3.8 Rest of Europe
    • 5.5.4 South America
      • 5.5.4.1 Brazil
      • 5.5.4.2 Argentina
      • 5.5.4.3 Rest of South America
    • 5.5.5 Middle East and Africa
      • 5.5.5.1 Saudi Arabia
      • 5.5.5.2 South Africa
      • 5.5.5.3 Rest of Middle East and Africa

6 Competitive Landscape

  • 6.1 Market Concentration
  • 6.2 Strategic Moves
  • 6.3 Market Share(%)/Ranking Analysis
  • 6.4 Company Profiles (includes Global level Overview, Market level overview, Core Segments, Financials as available, Strategic Information, Market Rank/Share for key companies, Products & Services, and Recent Developments)
    • 6.4.1 Ardex Group
    • 6.4.2 ChemCo Systems Inc.
    • 6.4.3 Garon Products Inc.
    • 6.4.4 Henkel AG & Co. KGaA
    • 6.4.5 MAPEI S.p.A.
    • 6.4.6 Meridian Adhesives Group
    • 6.4.7 Pidilite Industries Limited
    • 6.4.8 RPM International Inc.
    • 6.4.9 Saint-Gobain
    • 6.4.10 Sika AG
    • 6.4.11 The Euclid Chemical Company
    • 6.4.12 W. R. Grace & Co

7 Market Opportunities & Future Outlook

  • 7.1 White-space & Unmet-Need Assessment
  • 7.2 Eco-Friendly and Low-VOC Concrete Bonding Agents