南美洲射出成型機市場：市場佔有率分析、產業趨勢與統計及成長預測（2026-2031）

根據 Mordor Intelligence 預測，南美射出成型機市場規模將從 2025 年的 4.1275 億美元和 2026 年的 4.2753 億美元成長到 2031 年的 5.0973 億美元，2026 年至 2031 年的複合年成長率為 3.58%。

本報告按機器類型（液壓式、純電動式、混合動力式）、終端用戶行業（包裝、汽車及運輸、消費品、醫療保健、電氣及電子、建築及其他終端用戶行業）和地區（巴西、阿根廷、哥倫比亞及其他南美國家）進行細分。市場預測以美元計價。

南美洲射出成型機市場趨勢與洞察

包裝製造商的高需求

包裝加工商為食品、飲料和消費品產業提供包裝，佔2025年機械出貨量的34.28%。薄壁成型週期小於5秒以及能夠加工大量再生材料且注射重量無偏差是關鍵的採購標準。巴西塑膠加工產業預計2026年銷售額將達到1,680億雷亞爾（300億美元），並計畫在2027年投資317億雷亞爾（57億美元）用於永續發展項目。哥倫比亞在2024年前九個月進口了價值1.02億美元的塑膠機械，其中43%為射出成型機。這比去年同期成長了17%，凸顯了向多腔、節能系統升級的浪潮。 「2025年巴西塑膠展」上的示範進一步印證了這項轉變。阿博格（ARBURG）的混合動力注塑機Allrounder 720 H在不到5秒的時間內成型了四個250毫升的人造奶油容器，而海天（Haitian）的全電動注塑機Zhafir Zeres F則在3.2秒內完成了薄壁食品容器的成型循環。巴西第12.688號法令將於2025年10月生效，該法令強制要求塑膠包裝進行逆向物流，迫使加工商過渡到具有主動熔體控制和即時校正功能的注塑機，以確保再生樹脂的高效運作。

推廣輕型汽車

為了減輕車重並實現電氣化目標，汽車製造商正以纖維增強熱塑性塑膠和工程聚合物取代金屬。預計2025年至2030年，用於引擎零件的聚醯胺市場將以6.2%的複合年成長率成長，而碳纖維增強塑膠市場預計將以9.3%的複合年成長率成長。克勞斯·馬菲的「短切纖維加工技術」可直接以桶裝形式供應玻璃纖維和聚丙烯，從而降低高達30%的材料成本，並可在一年內收回投資。在樹脂進口溢價較高的市場中，這無疑是個極具吸引力的提案。巴西的MOVER計畫為研發投入至少佔銷售額2%的汽車製造商提供190億雷亞爾（約34億美元）的稅額扣抵，以促進輕量化零件的在地化生產。擬議的法令允許哥倫比亞免稅進口環保汽車零件，加上 17 項自由貿易協定，將安蒂奧基亞和波哥大定位為該地區電動車供應鏈的中心。

大型壓平機需要大量的初始設備投資。

在拉丁美洲，標準壓平機的價格在1萬至3萬美元之間，但噸位超過300噸的機型價格則超過10萬美元。由於截至2025年12月，巴西和阿根廷的Selic利率仍高達15%，因此兩國約75%的採購依賴內部現金流。阿根廷的大型投資獎勵計畫（RIGI）為超過2億美元的項目提供30年的稅收優惠，但典型的注塑投資低於此門檻，使得許多買家容易受到政策變化的影響。翻新註塑機的售價通常比新機低50%以上，但其年度維護成本在8%至10%之間，而新機的維護成本僅為2%至3%。

細分市場分析

到2025年，液壓射出成型機將佔據南美市場59.37%的佔有率，這主要得益於其較低的購置價格以及與現有大噸位模具的兼容性。預計到2031年，全電動注塑機的複合年成長率將達到4.96%。結合電動鎖模和液壓注射的混合動力系統提供了一種折衷方案，既能實現更快的乾式循環和顯著的效率提升，又無需承擔全電動系統帶來的高昂價格。在2025年巴西國際塑膠展覽會（Plastico Brasil 2025）上，阿博格（ARBURG）的混合動力注塑機「Allrounder 720 H」在不到5秒的時間內生產了四個套模貼標的250毫升容器。克勞斯瑪菲（KraussMaffei）改進後的全電動注塑機「PX」的效率提高了25%，面積減少了23%，這些特性正是實施工業4.0監控的加工企業所迫切需要的。

在巴西和阿根廷，大規模工業用戶如果以批發電價付費，使用電動壓平機可在2-3年內回收成本。同時，面臨更高混合電價的中小型企業(SME)正在考慮使用混合動力或伺服液壓壓力機。 ENGEL公司在克雷塔羅生產的e-mac壓力機，現在只需幾週而非幾個月即可交付給巴西買家，從而提高了設備正常運作的規劃效率。住友重工(SHI)旗下的德馬格(Demag)的IntElect平台，透過100%再生聚丙烯和activeMeltControl技術的演示，滿足了巴西第12.688號法令對廢舊塑膠日益成長的利用需求。

其他好處：

• Excel格式的市場預測（ME）表
• 3個月的分析師支持

目錄

第1章：引言

• 研究假設和市場定義
• 調查範圍

第2章：調查方法

第3章執行摘要

第4章 市場狀況

• 市場概覽
• 市場促進因素
  • 包裝製造商的高需求
  • 推廣輕型汽車
  • 加速電動和混合動力智慧摩托車的普及
  • 巴西FINAME-2030資本財貨稅優惠政策
  • 北美模塑零件供應鏈的近岸外包
• 市場限制因素
  • 大型機械設備的初始投資額相對較高。
  • 外匯波動風險與宏觀經濟風險
  • 電網電力成本飆升正在影響營運支出。
• 價值鏈分析
• 波特五力模型

第5章 市場規模與成長預測

• 按機器類型
  • 油壓
  • 全電動
  • 混合
• 按最終用戶行業分類
  • 包裝
  • 汽車和運輸業
  • 消費品
  • 衛生保健
  • 電氣和電子設備
  • 建築/施工
  • 其他終端用戶產業
• 按地區
  • 巴西
  • 阿根廷
  • 哥倫比亞
  • 其他南美國家

第6章 競爭情勢

• 市場集中度
• 策略趨勢
• 市佔率和排名分析
• 公司簡介
  • ARBURG GmbH+Co KG
  • Chen Hsong Holdings Ltd.
  • ENGEL AUSTRIA GmbH
  • Grupo COME IN
  • Haitian Group
  • Husky Injection Molding Systems Ltd.
  • Jon Wai Machinery Works Co., Ltd.
  • KraussMaffei Group
  • LK Technology Holdings Ltd.
  • Lanson of Americas
  • Milacron Holdings, LLC
  • NISSEI Plastic Industrial Co., Ltd.
  • Pavan Zanetti
  • ROMI SA
  • Sandretto
  • Shibaura Machine
  • Sumitomo（SHI）Demag Plastics Machinery
  • The Japan Steel Works Ltd.
  • UBE Machinery Corporation
  • WITTMANN Battenfeld GmbH

第7章 市場機會與未來展望

According to Mordor Intelligence, the south america injection molding machines market size is projected to expand from USD 412.75 million in 2025 and USD 427.53 million in 2026 to USD 509.73 million by 2031, registering a CAGR of 3.58% between 2026 to 2031.

This report is Segmented by Machine Type (Hydraulic, All-Electric, and Hybrid), End-User Industry (Packaging, Automotive and Transportation, Consumer Goods, Healthcare, Electrical and Electronics, Building and Construction, and Other End-User Industries), and Geography (Brazil, Argentina, Colombia, and Rest of South America). The Market Forecasts are Provided in Terms of Value (USD).

South America Injection Molding Machines Market Trends and Insights

High Demand from Packaging Converters

Packaging converters supply food, beverage, and fast-moving consumer goods, and they represented 34.28% of 2025 machine shipments. Thin-wall cycle times under five seconds and the ability to process high levels of recycled content without shot-weight drift top purchasing criteria. Brazil's plastics transformation industry expects BRL 168 billion (USD 30 billion) in 2026 sales and plans BRL 31.7 billion (USD 5.7 billion) in sustainability-oriented investments through 2027. Colombia imported USD 102 million of plastics machinery during the first nine months of 2024, 43% of which were injection presses, marking a 17% year-on-year gain that underscores an upgrade wave toward high-cavitation, energy-efficient systems. Demonstrations at Plastico Brasil 2025 reinforced the shift: ARBURG molded four 250 ml margarine containers in under five seconds on a hybrid Allrounder 720 H, while Haitian's all-electric Zhafir Zeres F hit a 3.2-second cycle for thin-wall food containers. Brazil's Decreto 12.688 of October 2025 obliges reverse logistics for plastic packaging, pushing converters toward presses with active melt-control and real-time compensation so recycled resins run reliably.

Automotive Lightweighting Push

Automotive OEMs are replacing metal with fiber-reinforced thermoplastics and engineering polymers to reduce vehicle weight and enable electrification targets. Polyamide for engine parts is forecast to grow at 6.2% CAGR from 2025-2030, while carbon-fiber-reinforced plastics could advance at 9.3%. KraussMaffei's Chopped Fiber Processing technology dispenses glass-fiber and polypropylene directly in the barrel, cutting material cost up to 30% and delivering payback within a year, an appealing proposition in markets exposed to resin import premiums. Brazil's MOVER program offers BRL 19 billion (USD 3.4 billion) in tax credits for automakers investing at least 2% of revenue in R&D, incentivizing local production of lightweight parts. Colombia's draft decree granting zero-tariff imports on green-vehicle components, combined with 17 free-trade agreements, positions Antioquia and Bogota to serve regional EV supply chains.

High Upfront Capex for Large-Tonnage Machines

Standard presses list at USD 10,000-30,000 across Latin America, while units above 300 tons exceed USD 100,000. Roughly 75% of purchases in Brazil and Argentina rely on internal cash flow because commercial interest rates remain elevated at 15% Selic in December 2025. Argentina's Regimen de Incentivo para Grandes Inversiones (RIGI) scheme provides 30-year tax stability on projects over USD 200 million, but typical molding investments fall below that threshold, leaving most buyers exposed to policy swings. Refurbished presses sell at discounts of more than 50% yet carry 8%-10% annual maintenance costs versus 2%-3% for new units.

Other drivers and restraints analyzed in the detailed report include:

1. Acceleration of Electric and Hybrid IMM Adoption
2. Brazil's FINAME-2030 Tax Incentives for Capital Equipment
3. Currency Volatility and Macro-Economic Risk

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Hydraulic machines accounted for 59.37% of the South America injection molding machines market in 2025, supported by lower purchase price and compatibility with existing large-tonnage molds. All-electric machines are set to expand at a 4.96% CAGR to 2031. Hybrid systems, mixing electric clamping with hydraulic injection, offer a compromise that delivers faster dry cycles and meaningful efficiency gains without the full electric price premium. At Plastico Brasil 2025, ARBURG's hybrid Allrounder 720 H produced four in-mold-labeled 250 ml containers in under five seconds. KraussMaffei's revamped PX all-electric showed a 25% efficiency bump and a 23% footprint reduction, features in demand among converters adopting Industry 4.0 monitoring.

Across Brazil and Argentina, large industrial users paying wholesale power tariffs can achieve two- to three-year payback periods on electric presses, while small and medium-sized enterprises (SMEs) facing higher blended rates weigh hybrids or servo-hydraulics. ENGEL's e-mac machines built in Queretaro now reach Brazilian buyers in weeks instead of months, improving uptime planning. Sumitomo (SHI) Demag's IntElect platform, demonstrated on 100% recycled polypropylene with activeMeltControl, aligns with rising requirements for post-consumer resin usage under Brazil's Decreto 12.688.

List of Companies Covered in this Report:

1. ARBURG GmbH + Co KG
2. Chen Hsong Holdings Ltd.
3. ENGEL AUSTRIA GmbH
4. Grupo COME IN
5. Haitian Group
6. Husky Injection Molding Systems Ltd.
7. Jon Wai Machinery Works Co., Ltd.
8. KraussMaffei Group
9. L.K. Technology Holdings Ltd.
10. Lanson of Americas
11. Milacron Holdings, LLC
12. NISSEI Plastic Industrial Co., Ltd.
13. Pavan Zanetti
14. ROMI S.A.
15. Sandretto
16. Shibaura Machine
17. Sumitomo (SHI) Demag Plastics Machinery
18. The Japan Steel Works Ltd.
19. UBE Machinery Corporation
20. WITTMANN Battenfeld GmbH

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 Introduction

• 1.1 Study Assumptions and Market Definition
• 1.2 Scope of the Study

2 Research Methodology

3 Executive Summary

4 Market Landscape

• 4.1 Market Overview
• 4.2 Market Drivers
  • 4.2.1 High demand from packaging converters
  • 4.2.2 Automotive lightweighting push
  • 4.2.3 Acceleration of electric and hybrid IMM adoption
  • 4.2.4 Brazil's FINAME-2030 tax incentives for capital equipment
  • 4.2.5 Nearshoring of North-American moulded-parts supply chains
• 4.3 Market Restraints
  • 4.3.1 High upfront capex for large-tonnage machines
  • 4.3.2 Currency volatility and macro-economic risk
  • 4.3.3 Grid-electricity cost spikes impacting OPEX
• 4.4 Value Chain Analysis
• 4.5 Porter's Five Forces
  • 4.5.1 Bargaining Power of Suppliers
  • 4.5.2 Bargaining Power of Buyers
  • 4.5.3 Threat of New Entrants
  • 4.5.4 Threat of Substitutes
  • 4.5.5 Intensity of Competitive Rivalry

5 Market Size and Growth Forecasts (Value)

• 5.1 By Machine Type
  • 5.1.1 Hydraulic
  • 5.1.2 All-Electric
  • 5.1.3 Hybrid
• 5.2 By End-User Industry
  • 5.2.1 Packaging
  • 5.2.2 Automotive and Transportation
  • 5.2.3 Consumer Goods
  • 5.2.4 Healthcare
  • 5.2.5 Electrical and Electronics
  • 5.2.6 Building and Construction
  • 5.2.7 Other End-User Industries
• 5.3 By Geography
  • 5.3.1 Brazil
  • 5.3.2 Argentina
  • 5.3.3 Colombia
  • 5.3.4 Rest of South America

6 Competitive Landscape

• 6.1 Market Concentration
• 6.2 Strategic Moves
• 6.3 Market Share (%)/Ranking Analysis
• 6.4 Company Profiles (includes Global level Overview, Market level overview, Core Segments, Financials as available, Strategic Information, Products and Services, and Recent Developments)
  • 6.4.1 ARBURG GmbH + Co KG
  • 6.4.2 Chen Hsong Holdings Ltd.
  • 6.4.3 ENGEL AUSTRIA GmbH
  • 6.4.4 Grupo COME IN
  • 6.4.5 Haitian Group
  • 6.4.6 Husky Injection Molding Systems Ltd.
  • 6.4.7 Jon Wai Machinery Works Co., Ltd.
  • 6.4.8 KraussMaffei Group
  • 6.4.9 L.K. Technology Holdings Ltd.
  • 6.4.10 Lanson of Americas
  • 6.4.11 Milacron Holdings, LLC
  • 6.4.12 NISSEI Plastic Industrial Co., Ltd.
  • 6.4.13 Pavan Zanetti
  • 6.4.14 ROMI S.A.
  • 6.4.15 Sandretto
  • 6.4.16 Shibaura Machine
  • 6.4.17 Sumitomo (SHI) Demag Plastics Machinery
  • 6.4.18 The Japan Steel Works Ltd.
  • 6.4.19 UBE Machinery Corporation
  • 6.4.20 WITTMANN Battenfeld GmbH

7 Market Opportunities and Future Outlook

• 7.1 White-space and Unmet-Need Assessment