查看購物車
  • Simplified Chinese
  • English
  • Japanese
封面
市場調查報告書
商品編碼
1851598

木塑複合材料（WPC）：市場佔有率分析、行業趨勢、統計數據和成長預測（2025-2030 年）

Wood Plastic Composites (WPC) - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2025 - 2030)
出版日期: | 出版商: Mordor Intelligence | 英文 120 Pages | 商品交期: 2-3個工作天內

價格

※ 本網頁內容可能與最新版本有所差異。詳細情況請與我們聯繫。

簡介目錄

預計到 2025 年，木塑複合材料 (WPC) 市場規模將達到 89.1 億美元，到 2030 年將達到 134.5 億美元，預測期（2025-2030 年）複合年成長率為 8.60%。

木塑複合材料（WPC）市場-IMG1

推動需求成長的因素包括亞洲建設活動的活性化、北美DIY裝修熱潮的興起以及歐洲日益嚴格的再生材料含量法規。產品開發商正致力於使用相容劑和提高木纖維含量以增強強度，而歐洲汽車製造商則指定使用更輕的非結構性部件以延長電動車的續航里程。供應商也正在推廣包覆型材，以保護色彩並減少吸濕，從而提升零售吸引力。亞太地區預計在2024年將佔全球銷售額的55%，並將成為成長最快的地區，到2030年將以9.50%的複合年成長率成長。這主要得益於當地製造商不斷提升生產能力，並致力於生產無鉛PVC室內板材以符合當地日益嚴格的衛生法規。

全球木塑複合材料（WPC）市場趨勢與洞察

DIY居家維修的趨勢日益成長

屋主們越來越傾向於選擇安裝快速、防污且無需每年重新密封的露台板材。零售商也積極回應，開始銷售卡扣式板材，這種板材不僅安裝簡便，還能滿足消費者對永續性。目前，碳負排放的木塑複合材料（WPC）露台板材原型產品所儲存的二氧化碳量已超過其生產過程中的排放量，如果大規模推廣，每年可儲存25萬噸二氧化碳。美國大型連鎖超市正在擴大其銷售的封閉式型材產品範圍，從而增強了穩定的現金流，幫助生產商抵禦建設產業不景氣。數位教學和網紅內容的傳播正在推動DIY的普及，使塑木複合材料逐漸進入郊區家庭的裝修預算。這一趨勢也帶動了與板材顏色相匹配的售後欄桿和照明套件的銷售，從而創造了額外的收入來源。

歐盟循環經濟行動計畫中的強制性木纖維回收目標

歐盟的目標是到2030年將其再生材料含量加倍，達到23.2%，並要求板材和甲板工廠更多地使用消費後木粉。各公司正在安裝光學分類機和化學清洗線，以提高再生材料含量，同時不影響機械性能。同時，包裝和包裝廢棄物法規強制要求所有形式的包裝都必須是可回收包裝，這進一步增強了對生物複合材料替代品的需求。在綠色建築標籤的推動下，德國和法國的建築商正在製定更高的回收率標準，以縮短先進分類設備的投資回收期。因此，再生材料供應合約的談判期限已延長至多年，從而降低了原料價格的不確定性。隨著合規性轉變成為結構性需求促進因素，這些政策因素共同推動了塑木複合材料市場的擴張。

溫度敏感性和磨損等技術問題

某些配方材料在持續高溫下會發生蠕變，因此限制了其在引擎室等溫度超過 120°C 的應用中的使用。眾所周知，高人流的地板材料在經過數百萬次踩踏後會失去光澤，因此常被設施管理人員棄用。奈米顆粒增強材料的研究顯示出提高表面耐磨性的潛力，但會增加成本，而中型建築商往往對此有所顧慮。高溫尖峰時段的尺寸漂移也會增加施工公差，並延長承包商的工作時間。這些問題限制了它們在金屬和工程木材已被證明有效的應用中的替代潛力。

細分市場分析

聚乙烯木塑複合材料（WPC）已在木塑複合材料市場佔據主導地位，預計2024年將佔據55%的市場。聚乙烯WPC的優點在於其易於擠出、填料相容性強以及原料價格實惠。製造商可添加高達60%的木粉而不會顯著增加黏度，使板材保持成本競爭力。聚丙烯級產品將最快成長，複合年成長率（CAGR）達9.20%，這主要得益於其更高的熱變形率和剛度，使其適用於汽車內裝板，並已證實可實現30%的減重。無鉛PVC板材將在室內地板材料佔據日益成長的市場佔有率，尤其是在亞洲。 PLA等相容劑正被應用於實驗性甲板磚中，隨著成本差距的縮小，其未來發展潛力巨大。順丁烯二酸酐接枝等相容劑創新技術可增強界面結合力，使生產商能夠使用更多木材和更少樹脂。這項措施同時提高了永續性評分和利潤率。

市場參與企業正在拓展其樹脂產品組合，以對沖聚合物價格波動帶來的風險。 2024年，聚合物價格波動幅度達到了兩位數。這項策略也能確保在計畫內的裂解裝置停產導致聚乙烯供應受限的情況下，原料供應的連​​續性。因此，豐富的產品組合有助於企業獲得長期銷售合約，進而提升競爭優勢。這種轉變將材料科學與應用需求結合，進一步鞏固了塑木複合材料市場的發展動能。

擠出生產線是甲板和圍欄生產的支柱，預計到2024年將佔全球產量的70%。配備重力式餵料器的雙螺桿擠出機目前可以以800公斤/小時的速度運行，同時將水分含量保持在0.5%以下，從而最大限度地減少空隙。生產線自動化系統即時追蹤型材溫度，使廢品率低於2%。射出成型雖然規模仍然較小，但隨著汽車製造商對3D形狀和嚴格公差的需求不斷成長，其複合年成長率（CAGR）已達到9.10%。多材料包覆成型將木塑複合材料（WPC）芯材與觸感柔軟的熱塑性彈性體（TPE）表層粘合在一起，在提升汽車內飾質感的同時，減少了組裝步驟。拉擠成型在橋樑人行道的高模量梁領域找到了獨特的應用前景，它利用連續玻璃粗紗來實現高彎曲剛度。

製程創新透過機器原始設備製造商 (OEM) 與本地加工商之間的授權合約進行推廣，從而降低了學習難度。近紅外線光譜線上監測能夠快速回饋水分含量，而過去則需要實驗室乾燥測試。這些升級提高了產量，降低了每公斤產品的能耗，從而擴大了市場規模，並減少了塑木複合材料的碳足跡。與木塑複合材料相容的 3D 列印耗材正陸續進入設計工作室，使建築師無需進行完整的工業運作即可自由測試客製化的格柵地板，這標誌著新一輪應用浪潮的到來。

木塑複合材料市場報告按塑膠材料（聚乙烯、聚丙烯、其他）、加工技術（擠出、射出成型、其他）、產品形式（帶蓋（共擠出）WPC、不帶蓋（傳統）WPC）、應用（建築和施工產品、汽車零件、其他）和地區（亞太地區、北美、歐洲、南美、中東和非洲）進行細分。

區域分析

到2024年，亞太地區將佔全球木塑複合材料市場55%​​的佔有率，對該產業貢獻巨大。強勁的都市化、對綠色建築規範的支持以及豐富的生質能資源，都支撐著該地區的領先地位。隨著工廠最佳化卷材生產線並獲得美國聯邦住房管理局（FHA）的認可，中國對北美的甲板出口正在成長。日本是低揮發性有機化合物（VOC）室內板材的先驅者，這得益於政府對健康住宅的補貼。印度的基礎建設正在推廣使用木塑複合材料（WPC）人行天橋，以避免熱帶地區常見的白蟻問題。

北美擁有濃厚的DIY文化，而高階品牌策略正在推動市場成長。 Trex和AZEK向超過6,700家零售商供應產品，並正將銷售通路拓展至二線城市。家居裝潢連鎖店發現，每米售價4美元的封層板銷售量優於傳統的防腐木材，進一步推動了市場擴張。加拿大受益於豐富的國內木材資源，這縮短了供應鏈，並促進了分散式板材生產，從而更好地服務偏遠社區。

隨著強制性再利用目標的推進，歐洲的政策框架正在重組木材採購和回收途徑。德國加工商正在試行高達80%的再生木材，並因此獲得了讓大型開發人員印象深刻的生態標章。汽車原始設備製造商的需求正將中歐打造成為射出成型材料（WPC）組件的中心，並將供應與附近的組裝廠整合起來。儘管氣候寒冷，北歐市場仍在度假屋中廣泛採用帽式甲板，因為其維護成本低於初始投資。

在中東，尤其是海灣合作理事會（GCC）國家，耐沙漠複合材料涼棚越來越受歡迎。這種涼棚採用紫外線防護和耐熱顏料配製而成，即使在高達攝氏45度的溫度下也能保持色彩鮮豔。杜拜的城市美化計畫帶動了步行道訂單，凸顯了木塑複合材料（WPC）相比熱帶硬木在生命週期成本方面的優勢。雖然非洲的戶外家具市場仍處於起步階段，但南非的零售商報告稱，採用耐鹽霧且不易開裂的複合材料板條製成的高階戶外家具銷量實現了兩位數的成長。

其他福利：

  • Excel格式的市場預測（ME）表
  • 3個月的分析師支持

目錄

第1章 引言

  • 研究假設和市場定義
  • 調查範圍

第2章調查方法

第3章執行摘要

第4章 市場情勢

  • 市場概覽
  • 市場促進因素
    • DIY居家維修的趨勢日益成長
    • 歐盟循環經濟行動計畫中強制木纖維回收目標
    • 亞洲室內裝潢材料轉向無鉛PVC基木塑複合材料的轉變正在加速。
    • 歐洲汽車製造商努力減輕非結構性汽車零件的重量
    • 海灣合作理事會國家對低維護成本的城市戶外景觀產品的需求激增
  • 市場限制
    • 技術問題，例如溫度敏感性和佩戴舒適性
    • 價格波動
    • 高層建築防火認證面臨的障礙
  • 價值鏈分析
  • 波特五力模型
    • 供應商的議價能力
    • 買方的議價能力
    • 新進入者的威脅
    • 替代品的威脅
    • 競爭程度

第5章 市場規模與成長預測

  • 透過塑膠材料
    • 聚乙烯（PE）
    • 聚丙烯（PP）
    • 聚氯乙烯（PVC）
    • 聚苯乙烯（PS）
    • 其他材料（ABS、PLA 等）
  • 透過加工技術
    • 擠壓
    • 射出成型
    • 壓縮和提取
  • 按產品形式
    • 帶蓋共擠出木塑複合材料
    • 無上限（傳統）WPC
  • 透過使用
    • 建築及施工產品
      • 甲板
      • 擊劍
      • 塑形和修剪
      • 景觀設計與戶外
    • 汽車零件
    • 產業
    • 消費品
    • 家具
    • 其他
  • 按地區
    • 亞太地區
      • 中國
      • 印度
      • 日本
      • 韓國
      • ASEAN
      • 亞太其他地區
    • 北美洲
      • 美國
      • 加拿大
      • 墨西哥
    • 歐洲
      • 德國
      • 法國
      • 英國
      • 義大利
      • 北歐國家
      • 其他歐洲地區
    • 中東和非洲
      • 沙烏地阿拉伯
      • 土耳其
      • 南非
      • 奈及利亞
      • 其他中東和非洲地區
    • 南美洲
      • 巴西
      • 阿根廷
      • 南美洲其他地區

第6章 競爭情勢

  • 市場集中度
  • 策略趨勢
  • 市佔率分析
  • 公司簡介
    • Anhui Sentai WPC Group Share Co., Ltd.
    • Axion Structural Innovations LLC
    • Beologic
    • Fiberon（Fortune Brands Innovations）
    • FKuR
    • Geolam AG
    • Green Bay Decking LLC
    • Guangzhou Kindwood Co., Ltd.
    • JELU-WERK J. Ehrler GmbH & Co. KG
    • Oldcastle APG（CRH）
    • PolyPlank Solutions AB
    • Resysta International
    • Saint-Gobain
    • TAMKO Building Products LLC
    • The AZEK Company Inc.
    • Trex Company Inc.
    • UFP Industries, Inc.

第7章 市場機會與未來展望

簡介目錄
Product Code: 61019

The Wood Plastic Composites Market size is estimated at USD 8.91 billion in 2025, and is expected to reach USD 13.45 billion by 2030, at a CAGR of 8.60% during the forecast period (2025-2030).

Wood Plastic Composites (WPC) - Market - IMG1

Demand accelerators include growing construction activity in Asia, DIY renovation in North America, and regulatory pushes for recycled content in Europe. Product developers are blending higher wood-fiber loads with compatibilizers that improve strength, while automakers in Europe specify lighter non-structural parts to extend electric-vehicle range. Suppliers are also scaling capped profiles that protect colour and curb moisture uptake, which widens retail appeal. Asia-Pacific commands 55% of 2024 revenue and will remain the fastest-expanding geography at a 9.50% CAGR through 2030 as local manufacturers upgrade capacity and pursue lead-free PVC indoor panels that meet tightening regional health rules.

Global Wood Plastic Composites (WPC) Market Trends and Insights

Rise in DIY Home Improvement Trends

Home-owners are spending more on decks that install quickly, resist staining, and avoid yearly re-sealing. Retailers respond by stocking click-fit boards that save labor and tap into the wider sustainability preference of consumers. Carbon-negative WPC decking prototypes now store more CO2 than production emits, potentially locking away 250,000 tons annually if adopted at scale. Big-box chains in the United States dedicate additional aisle space to capped profiles, reinforcing steady cash sales that cushion producers from construction cyclicality. Digital tutorials and influencer content widen do-it-yourself reach, pushing the wood plastic composite market into suburban remodel budgets. The trend also lifts aftermarket railing and lighting kits that match board colours, creating incremental revenue streams.

Mandatory Wood-Fiber Reuse Targets in EU Circular Economy Action Plan

The EU seeks to double its circular material-use rate to 23.2% by 2030, which obliges panel and decking factories to integrate more post-consumer wood flour. Companies deploy optical sorters and chemical cleaning lines that raise recycled-content ratios without hurting mechanical properties. Simultaneously, the Packaging and Packaging Waste Regulation compels every packaging format to be recyclable, reinforcing demand for biocomposite alternatives. German and French builders, backed by green-building labels, specify higher recycled fractions that shorten payback for advanced sorting plants. Consequently, recyclate supply contracts are now negotiated over multi-year tenors, reducing feedstock-price uncertainty. These policy levers collectively expand the wood plastic composite market as compliance shifts become structural demand drivers.

Technical Issues Like Temperature Sensitivity and Wearability

Some formulations creep under sustained heat, limiting under-hood use where temperatures breach 120 °C. High-traffic flooring reveals surface gloss loss after millions of footfalls, which deters facility managers. Nanoparticle fortification studies show promise for tougher surfaces yet add cost overheads that mid-tier builders resist. Dimensional drift at temperature peaks also raises installation tolerances, lengthening job times for contractors. These concerns lower substitution rates in applications where metal or engineered wood remain proven.

Other drivers and restraints analyzed in the detailed report include:

  1. Accelerated Shift Toward Lead-Free PVC-Based WPC for Indoor Applications in Asia
  2. Light-weighting Push by European OEMs for Non-Structural Automotive Parts
  3. Fire-Resistance Certification Hurdles in High-Rise Construction

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Polyethylene WPC held 55% of the wood plastic composite market share in 2024, establishing its dominant position in the market. Its dominance stems from easy extrusion, broad filler tolerance, and attractive raw-material pricing. Manufacturers mix up to 60% wood flour without severe viscosity spikes, which keeps board costs competitive. Polypropylene grades expand fastest at a 9.20% CAGR, lifted by higher heat-deflection and stiffness that suit automotive interior panels where 30% weight savings are proven. Lead-free PVC boards, especially in Asian indoor flooring, fill a growing health-conscious niche. Biopolymers such as PLA appear in pilot deck tiles, signalling future openings once cost gaps narrow. Compatibilizer innovation, notably maleic-anhydride grafts, lifts interfacial bonding so producers can raise wood loadings and shrink resin usage. That step enhances sustainability scores and margins simultaneously.

Market participants broaden their resin slate to hedge against polymer price swings that reached double-digit volatility in 2024. The strategy also secures feedstock continuity when planned cracker shutdowns tighten PE supply. Consequently, portfolio breadth becomes a competitive credential in winning long-term distributor contracts. These shifts reinforce the wood plastic composite market trajectory by aligning material science with application-specific needs.

Extrusion lines produced 70% of 2024 global volume, making the method the backbone of deck and fence output. Twin-screw extruders with gravimetric feeders can now run 800 kg/hr while keeping moisture below 0.5%, which minimises void formation. Line automation tracks profile temperature in real time, trimming scrap rates below 2%. Injection molding, though smaller, climbs at 9.10% CAGR because automakers require three-dimensional geometries and tight tolerances. Multi-material over-molding joins WPC cores with soft-touch TPE skins, enhancing vehicle interior feel while cutting assembly steps. Pultrusion holds niche appeal for high-modulus beams in bridge walkways, leveraging continuous glass rovings for strong bending stiffness.

Process innovation spreads through licencing deals between machinery OEMs and regional processors, flattening the learning curve. Inline monitoring with near-infrared spectroscopy provides rapid moisture feedback that once required laboratory drying tests. These upgrades raise throughput and shrink energy per kilogram, boosting the wood plastic composite market size and trimming carbon footprints. WPC-ready 3D-printing filaments emerge in design studios, giving architects freedom to test customised lattice decks without full industrial runs, foreshadowing another adoption wave.

The Wood Plastic Composite Market Report is Segmented by Plastic Material (Polyethylene, Polypropylene, and More), Processing Technology (Extrusion, Injection Molding, and More), Product Form (Capped (Co-Extruded) WPC and Un-Capped (Conventional) WPC), Application (Building and Construction Products, Automotive Parts, and More), and Geography (Asia-Pacific, North America, Europe, South America, and Middle East and Africa).

Geography Analysis

In 2024, the Asia-Pacific region accounted for 55% of the global wood plastic composite market, demonstrating its significant contribution to the industry. Strong urbanisation, supportive green-building norms, and abundant biomass supply anchor the region's leadership. Chinese decking exports to North America climb as factories optimise capstock lines and secure FHA acceptance. Japan pioneers low-VOC indoor boards, aided by government subsidies for healthier housing. India's infrastructure push sees WPC pedestrian bridges that avoid termite issues common in tropical settings.

North America benefits from a strong DIY culture and premium brand strategies, driving its market growth. Trex and AZEK supply more than 6,700 retail outlets, extending reach into secondary cities. Capped boards priced at USD 4.00 per linear foot outsell traditional pressure-treated lumber at home-centre chains, reinforcing market expansion. Canada benefits from domestic wood-fiber availability that shortens supply chains and boosts decentralised board production to serve remote communities.

Europe's policy framework reshapes sourcing and recycling routes as mandatory reuse targets near. German processors trial up to 80% recycled wood content to gain environment labels that sway large developers. Automotive OEM demand positions Central Europe as a hub for injection-molded WPC parts, integrating supply with nearby assembly plants. Nordic markets, despite cold climates, adopt capped decking for holiday cottages where low maintenance outweighs initial spend.

The Middle East, specifically GCC nations, records brisk uptake of desert-resistant composite pergolas. Formulations embed UV blockers and heat-stable pigments that preserve colour at 45 °C ambient conditions. Municipal beautification in Dubai triggers boardwalk orders that underscore WPC lifecycle cost benefits compared with tropical hardwood. Africa remains early stage but South African retailers report double-digit growth in premium outdoor furniture made from composite slats that weather salt air without cracking.

  1. Anhui Sentai WPC Group Share Co., Ltd.
  2. Axion Structural Innovations LLC
  3. Beologic
  4. Fiberon (Fortune Brands Innovations)
  5. FKuR
  6. Geolam AG
  7. Green Bay Decking LLC
  8. Guangzhou Kindwood Co., Ltd.
  9. JELU-WERK J. Ehrler GmbH & Co. KG
  10. Oldcastle APG (CRH)
  11. PolyPlank Solutions AB
  12. Resysta International
  13. Saint-Gobain
  14. TAMKO Building Products LLC
  15. The AZEK Company Inc.
  16. Trex Company Inc.
  17. UFP Industries, Inc.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 Introduction

  • 1.1 Study Assumptions and Market Definition
  • 1.2 Scope of the Study

2 Research Methodology

3 Executive Summary

4 Market Landscape

  • 4.1 Market Overview
  • 4.2 Market Drivers
    • 4.2.1 Rise in DIY Home Improvement Trends
    • 4.2.2 Mandatory Wood-Fiber Reuse Targets in EU Circular Economy Action Plan
    • 4.2.3 Accelerated Shift Toward Lead-Free PVC-Based WPC for Indoor Applications in Asia
    • 4.2.4 Light-weighting Push by European OEMs for Non-Structural Automotive Parts
    • 4.2.5 Surge in Demand for Low-Maintenance Urban Outdoor Landscaping Products in GCC
  • 4.3 Market Restraints
    • 4.3.1 Technical Issues Like Temperature Sensitivity, Wearability, etc
    • 4.3.2 Volatility in Prices
    • 4.3.3 Fire-Resistance Certification Hurdles in High-Rise Construction
  • 4.4 Value Chain Analysis
  • 4.5 Porter's Five Forces
    • 4.5.1 Bargaining Power of Suppliers
    • 4.5.2 Bargaining Power of Buyers
    • 4.5.3 Threat of New Entrants
    • 4.5.4 Threat of Substitute Products and Services
    • 4.5.5 Degree of Competition

5 Market Size and Growth Forecasts (Value)

  • 5.1 By Plastic Material
    • 5.1.1 Polyethylene (PE)
    • 5.1.2 Polypropylene (PP)
    • 5.1.3 Polyvinyl Chloride (PVC)
    • 5.1.4 Polystyrene (PS)
    • 5.1.5 Others (ABS, PLA, etc.)
  • 5.2 By Processing Technology
    • 5.2.1 Extrusion
    • 5.2.2 Injection Molding
    • 5.2.3 Compression and Pultrusion
  • 5.3 By Product Form
    • 5.3.1 Capped (Co-extruded) WPC
    • 5.3.2 Un-capped (Conventional) WPC
  • 5.4 By Application
    • 5.4.1 Building and Construction Products
      • 5.4.1.1 Decking
      • 5.4.1.2 Fencing
      • 5.4.1.3 Molding and Trimming
      • 5.4.1.4 Landscaping and Outdoor
    • 5.4.2 Automotive Parts
    • 5.4.3 Industrial
    • 5.4.4 Consumer Goods
    • 5.4.5 Furniture
    • 5.4.6 Others
  • 5.5 By Geography
    • 5.5.1 Asia-Pacific
      • 5.5.1.1 China
      • 5.5.1.2 India
      • 5.5.1.3 Japan
      • 5.5.1.4 South Korea
      • 5.5.1.5 ASEAN
      • 5.5.1.6 Rest of Asia-Pacific
    • 5.5.2 North America
      • 5.5.2.1 United States
      • 5.5.2.2 Canada
      • 5.5.2.3 Mexico
    • 5.5.3 Europe
      • 5.5.3.1 Germany
      • 5.5.3.2 France
      • 5.5.3.3 United Kingdom
      • 5.5.3.4 Italy
      • 5.5.3.5 Nordics
      • 5.5.3.6 Rest of Europe
    • 5.5.4 Middle East and Africa
      • 5.5.4.1 Saudi Arabia
      • 5.5.4.2 Turkey
      • 5.5.4.3 South Africa
      • 5.5.4.4 Nigeria
      • 5.5.4.5 Rest of Middle East and Africa
    • 5.5.5 South America
      • 5.5.5.1 Brazil
      • 5.5.5.2 Argentina
      • 5.5.5.3 Rest of South America

6 Competitive Landscape

  • 6.1 Market Concentration
  • 6.2 Strategic Moves
  • 6.3 Market Share Analysis
  • 6.4 Company Profiles (includes Global level Overview, Market level overview, Core Segments, Financials as available, Strategic Information, Market Rank/Share for key companies, Products and Services, and Recent Developments)
    • 6.4.1 Anhui Sentai WPC Group Share Co., Ltd.
    • 6.4.2 Axion Structural Innovations LLC
    • 6.4.3 Beologic
    • 6.4.4 Fiberon (Fortune Brands Innovations)
    • 6.4.5 FKuR
    • 6.4.6 Geolam AG
    • 6.4.7 Green Bay Decking LLC
    • 6.4.8 Guangzhou Kindwood Co., Ltd.
    • 6.4.9 JELU-WERK J. Ehrler GmbH & Co. KG
    • 6.4.10 Oldcastle APG (CRH)
    • 6.4.11 PolyPlank Solutions AB
    • 6.4.12 Resysta International
    • 6.4.13 Saint-Gobain
    • 6.4.14 TAMKO Building Products LLC
    • 6.4.15 The AZEK Company Inc.
    • 6.4.16 Trex Company Inc.
    • 6.4.17 UFP Industries, Inc.

7 Market Opportunities and Future Outlook

  • 7.1 Emerging Bio-based WPCs
  • 7.2 White-space and Unmet-need Assessment