查看購物車
  • Simplified Chinese
  • English
  • Japanese
封面
市場調查報告書
商品編碼
1850160

氣凝膠：市場佔有率分析、產業趨勢、統計數據、成長預測（2025-2030）

Aerogel - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2025 - 2030)
出版日期: | 出版商: Mordor Intelligence | 英文 120 Pages | 商品交期: 2-3個工作天內

價格

※ 本網頁內容可能與最新版本有所差異。詳細情況請與我們聯繫。

簡介目錄

預計氣凝膠市場規模到 2025 年將達到 9 億美元，到 2030 年將成長到 14.6 億美元，2025 年至 2030 年的複合年成長率為 9.85%。

氣凝膠市場-IMG1

高性能隔熱材料的持續需求，以及電氣化和碳減排政策的加速推進，正推動氣凝膠市場呈現強勁成長動能。由於嚴格的能源效率法規和強勁的油氣維修周期，北美目前佔據40%的市場佔有率，佔據市場主導地位。市場整合正在加劇，Aspen Aerogels和卡博特公司成為全球收益的主要驅動力。

全球氣凝膠市場趨勢與洞察

可重複使用性和可回收性提高了氣凝膠的採用率

製造商正在優先考慮能夠最大限度地提高再利用潛力並最大限度減少廢棄物產生的生產路線。新型二氧化矽氣凝膠在75公斤/立方公尺的低密度下仍維持95%的孔隙率，可達到多個使用週期且無熱損失。 ENERSENS擴大了其電腦控制的蒸發微波製程的規模，將產量提高了60%，同時實現了材料回收，並降低了最終用戶的總擁有成本。生命週期分析證實，與隔熱材料相比，工業規模的氣凝膠合成可減少對環境的影響，這使得這種材料對淨零排放路徑具有吸引力。隨著各大品牌量化綠色建築標籤的二氧化碳減排量，可重複使用的氣凝膠隔熱材料正成為日益重要的規範優先事項，尤其是對於需要長使用壽命的建築幕牆維修。

建築業對高性能隔熱材料的需求快速成長

日益嚴格的建築標準，包括2021年國際能源效率標準和類似的歐盟標準，要求降低外牆的U值。氣凝膠板的R值是礦棉的兩到四倍，同時佔用的空腔更薄，使其成為空間受限的都市區維修的必備材料。 2024年創紀錄的熱浪加速了人們對氣凝膠填充結構玻璃系統的興趣，這種系統可以在不犧牲陽光的情況下限制太陽能增益。新型防火「變形」氣凝膠目前正在保護火災易發地區的建築結構，凸顯了其除了節能之外更廣泛的韌性優勢。

製造成本高

超臨界乾燥仍然是主要的生產流程，需要在高溫高壓下運行的專用容器。資本密集度導致單位成本高於主流隔熱材料，阻礙了其在成本敏感的住宅領域的應用。常溫乾燥的研究前景廣闊，但尚未達到商業規模。近期的緩解措施著重於提高產量和溶劑回收率，以降低變動成本。在這些技術成熟之前，高昂的定價將限制氣凝膠的應用，僅限於那些對性能有嚴格要求且碳減排獎勵能夠證明前期投資合理性的計劃。

細分分析

預計到2024年，二氧化矽等級將佔據氣凝膠市場72%的佔有率，並將以10.11%的強勁複合年成長率進一步擴大其領先地位，直至2030年。這一領先地位歸功於其廣泛的應用領域，包括油氣管道、建築幕牆隔熱材料和電動車電池模組。大量的研發成果已研發出二氧化矽/聚醯亞胺「石榴」複合材料，其抗壓強度提高了12倍，且熱值保持不變，從而消除了機械處理方面的歷史障礙。

第二代二氧化矽系統也著重防潮性和易塗飾性。客製化疏水塗層如今可保持超過120°的接觸角，使建築幕牆能夠在潮濕氣候下使用。同時，負責人正在探索低醇鹽溶膠-凝膠工藝，以減少溶劑消費量、降低成本和二氧化碳排放。這些多方面的創新鞏固了二氧化矽在氣凝膠市場的地位，而技術進步很可能將決定該行業必須達到的整體性能標準。

由於毯子易於安裝且與能源基礎設施中使用的管道絕緣塗層相容，因此它在 2024 年佔據了氣凝膠市場 64% 的收益。最新產品的熱導率低至 0.0143 W/mK，可在 10 分鐘內達到熱平衡，從而縮短了施工時間。

顆粒形態是一個突破性的類別，隨著配方師將氣凝膠粉末融入塗料、鋰離子隔膜和聚合物複合材料中，預計到2030年，該類別的複合年成長率將達到10.34%。卡博特的ENTERA顆粒可作為電動車電池陰極的嵌入式熱調節器，無需厚厚的屏障即可緩解失控現象。

區域分析

到2024年，北美將以40%的收益佔有率引領氣凝膠市場。聯邦和各州的能源效率要求，以及強勁的石油和天然氣資本投資，支撐著強勁的需求。卡博特公司獲得美國能源部5000萬美元的撥款，用於其電池級導電添加劑的本地化，這肯定了政策主導對與氣凝膠具有直接協同效應的溫度控管材料的投資。美國國家科學基金會的津貼也為下一代建築隔熱材料的研究提供了種子資金，北美在性能突破方面處於領先地位。

預計亞太地區將成為成長最快的地區，到2030年，複合年成長率將達到10.25%。液化天然氣基礎設施的快速部署、住房建設的蓬勃發展以及電動車生產的加速成長將推動該地區的消費量飆升。中國科研機構研發出能夠承受極端溫度並承受結構負荷的碳氣凝膠複合材料，將為中國的高溫工業提供支援。

歐洲保持強大的監管領導力，利用《歐洲建築規範》(EPBD) 修正案，鼓勵深度節能維修，採用薄型高阻材料系統。一項在社會住宅區開展的試點項目展示了建築幕牆氣凝膠面板，在保持美觀的同時，減少了 40% 的空間供暖。中東和非洲地區繼續在煉油和石化升級領域採用氣凝膠，而南美洲液化天然氣進口和綠色建築認證的不斷成長勢頭也推動了氣凝膠的應用成長。

其他福利：

  • Excel 格式的市場預測 (ME) 表
  • 3個月的分析師支持

目錄

第1章 引言

  • 研究假設和市場定義
  • 調查範圍

第2章調查方法

第3章執行摘要

第4章 市場狀況

  • 市場概況
  • 市場促進因素
    • 可重複使用性和可回收性推動氣凝膠的採用
    • 建築業對高性能隔熱材料的需求快速成長
    • 能源效率法規刺激歐盟和北美的需求
    • 擴大亞洲液化天然氣基礎設施
    • 石油和天然氣產業主導氣凝膠需求
  • 市場限制
    • 生產成本高
    • 原料供應有限
    • 建築業中高性能聚合物泡沫的競爭
  • 價值鏈分析
  • 技術展望
  • 波特五力模型
    • 供應商的議價能力
    • 買方的議價能力
    • 新進入者的威脅
    • 替代產品和服務的威脅
    • 競爭程度

第5章市場規模及成長預測

  • 按類型
    • 二氧化矽
    • 碳
    • 氧化鋁
    • 其他類型
  • 按形式
    • 毯子
    • 粒子
    • 堵塞
    • 控制板
  • 按用途
    • 隔熱材料
    • 隔音材料
    • 催化劑和吸附劑
    • 電池和儲能
    • 日光和半透明面板
    • 其他用途
  • 按最終用戶產業
    • 石油和天然氣
    • 建造
    • 車
    • 海洋
    • 航太
    • 其他最終用戶產業
  • 按地區
    • 亞太地區
      • 中國
      • 印度
      • 日本
      • 韓國
      • 其他亞太地區
    • 北美洲
      • 美國
      • 加拿大
      • 墨西哥
    • 歐洲
      • 德國
      • 英國
      • 義大利
      • 法國
      • 其他歐洲地區
    • 南美洲
      • 巴西
      • 阿根廷
      • 其他南美
    • 中東和非洲
      • 沙烏地阿拉伯
      • 阿拉伯聯合大公國
      • 南非
      • 奈及利亞
      • 其他中東和非洲地區

第6章 競爭態勢

  • 市場集中度
  • 策略趨勢
  • 市佔率分析
  • 公司簡介
    • Acoustiblok, Inc.
    • Active Aerogels
    • Aerogel Technologies, LLC
    • aerogel-it
    • Armacell
    • Aspen Aerogels, Inc.
    • BASF
    • Blueshift Materials Inc.
    • Cabot Corporation
    • ENERSENS
    • Guangdong Alison Technology Co., Ltd.
    • Knauf Insulation
    • Nano Tech Co., Ltd.
    • Ningbo Surnano Aerogel Co., Ltd
    • Porex
    • Sino Aerogel
    • Svenska Aerogel AB
    • TAASI Corporation
    • Thermablok Aerogels Ltd.

第7章 市場機會與未來展望

簡介目錄
Product Code: 55541

The aerogel market is valued at USD 0.90 billion in 2025 and is projected to grow to USD 1.46 billion by 2030, advancing at a 9.85% CAGR in the 2025-2030 period.

Aerogel - Market - IMG1

Sustained demand for high-performance thermal insulation, coupled with accelerating electrification and carbon-reduction mandates, is placing the aerogel market on a strong growth trajectory. North America leads today with a 40% share, supported by strict energy-efficiency codes and an active oil-and-gas retrofit cycle. High market consolidation prevails; Aspen Aerogels and Cabot Corporation anchor global revenue, yet a host of regional specialists compete aggressively in formulation niches.

Global Aerogel Market Trends and Insights

Rise in Adoption of Aerogel Due to Reusability and Recyclability

Manufacturers are prioritizing production routes that maximize re-use potential and minimize waste generation. New silica aerogels now preserve 95% porosity at a low 75 kg/m3 density, allowing multiple service cycles without thermal loss. ENERSENS scaled a computer-controlled evaporation microwave process that lifts output 60% while enabling material recovery, lowering total cost of ownership for end users. Life-cycle analysis confirms industrial-scale aerogel synthesis slashes environmental burdens versus conventional insulants, making the material attractive in net-zero pathways. As brands quantify CO2 savings for green-building labels, reusable aerogel insulation is gaining specification priority, particularly in facade retrofits seeking long service life.

Rapidly Growing Construction Demand for High-performance Insulation

Building codes tightened under the 2021 International Energy Conservation Code and similar EU standards mandate lower envelope U-values. Aerogel panels deliver R-values 2-4 times times higher than mineral wool while occupying thinner cavities, critical for urban refurbishments where space is limited. Record heatwaves in 2024 accelerated interest in aerogel-filled glazing systems that limit solar gain without sacrificing daylight. Novel wildfire-resistant "morphing" aerogels now protect structures in fire-prone regions, highlighting broader resilience benefits beyond energy savings.

High Production Cost

Super-critical drying remains the dominant manufacturing route and demands specialized vessels operating at high pressure and temperature. Capital intensity keeps unit prices above mainstream insulation, discouraging uptake in cost-sensitive residential segments. Research into ambient pressure drying shows promise, but it is not yet commercial at scale. Short-term mitigation focuses on throughput gains and solvent recovery to lower variable costs. Until those techniques mature, premium positioning will constrain aerogel penetration to projects with stringent performance needs or carbon-reduction incentives that justify a higher upfront outlay.

Other drivers and restraints analyzed in the detailed report include:

  1. Energy-Efficiency Regulations Boosting EU and North American Demand
  2. Expansion of LNG Infrastructure Across Asia
  3. Limited Availability of Raw Materials

For complete list of drivers and restraints, kindly check the Table Of Contents.

Segment Analysis

Silica grades commanded a 72% share of the aerogel market in 2024 and are expected to widen their lead by posting a robust 10.11% CAGR through 2030, a rare scenario where the largest slice also grows fastest. This leadership stems from broad applicability in oil-and-gas pipelines, facade insulation, and EV battery modules. Significant research and development produced silica/polyimide "pomegranate" composites that yield 12-fold higher compressive strength without sacrificing thermal values, removing a historic barrier to mechanical handling.

Second-generation silica systems are also targeting moisture resistance and easier finishing. Tailored hydrophobic coatings now sustain contact angles above 120°, allowing exterior facade usage in humid climates. Meanwhile, formulators are exploring low-alkoxide sol-gel routes that cut solvent consumption, reducing cost and CO2 footprint. Given this multi-pronged innovation, silica's hold on the aerogel market appears secure, and its technological progress will likely dictate overall performance benchmarks the sector must meet.

Blankets secured 64% of the aerogel market revenue in 2024, owing to installation ease and compatibility with pipe-insulation jacketing used in energy infrastructure. Recent iterations achieve thermal conductivity as low as 0.0143 W/mK and reach thermal equilibrium in 10 minutes, shortening construction schedules.

Particle form is the breakout category, forecast to log a 10.34% CAGR through 2030 as formulators incorporate aerogel powders into coatings, lithium-ion separators, and polymer composites. ENTERA particles from Cabot serve as drop-in thermal modifiers in EV battery cathodes, mitigating runaway events without thick barriers.

The Aerogel Market Report Segments the Industry by Type (Silica, Carbon, Alumina, and Other Types), Form (Blanket, Particle, Block, and Panel), Application (Thermal Insulation, Acoustic Insulation, Catalyst and Adsorbent, and More), End-User Industry (Oil and Gas, Construction, Automotive, Marine, and More), and Geography (Asia-Pacific, North America, Europe, and More). The Market Forecasts are Provided in Terms of Value (USD).

Geography Analysis

North America led the aerogel market with a 40% revenue share in 2024. Federal and state efficiency mandates, alongside robust oil-and-gas capital expenditure, underpin solid demand. Cabot Corporation's USD 50 million Department of Energy award to localize battery-grade conductive additives affirms policy-driven investment in thermal-management materials with direct aerogel synergies. National Science Foundation grants are also seeding next-generation building insulation research, keeping North America at the forefront of performance breakthroughs.

Asia-Pacific is projected to register a 10.25% CAGR to 2030, making it the fastest-growing region. Rapid LNG infrastructure deployment, booming residential construction, and accelerating EV production converge to raise regional consumption sharply. Chinese institutes have introduced carbon-aerogel composites that withstand extreme temperatures while bearing structural loads, supporting domestic high-temperature industries.

Europe remains strong in regulatory leadership, leveraging EPBD revisions to encourage deep-energy retrofits that favor thin, high-R material systems. Pilot programs in social housing blocks showcase facade aerogel panels achieving 40% space-heating cuts while preserving exterior aesthetics. The Middle East and Africa continue to adopt aerogel in refining and petrochemical upgrades, while South America's growth is tied to LNG imports and rising green-building certification momentum.

  1. Acoustiblok, Inc.
  2. Active Aerogels
  3. Aerogel Technologies, LLC
  4. aerogel-it
  5. Armacell
  6. Aspen Aerogels, Inc.
  7. BASF
  8. Blueshift Materials Inc.
  9. Cabot Corporation
  10. ENERSENS
  11. Guangdong Alison Technology Co., Ltd.
  12. Knauf Insulation
  13. Nano Tech Co., Ltd.
  14. Ningbo Surnano Aerogel Co., Ltd
  15. Porex
  16. Sino Aerogel
  17. Svenska Aerogel AB
  18. TAASI Corporation
  19. Thermablok Aerogels Ltd.

Additional Benefits:

  • The market estimate (ME) sheet in Excel format
  • 3 months of analyst support

TABLE OF CONTENTS

1 Introduction

  • 1.1 Study Assumptions and Market Definition
  • 1.2 Scope of the Study

2 Research Methodology

3 Executive Summary

4 Market Landscape

  • 4.1 Market Overview
  • 4.2 Market Drivers
    • 4.2.1 Rise in Adoption of Aerogel Due to Reusability and Recyclability
    • 4.2.2 Rapidly Growing Construction Demand for High-performance Insulation
    • 4.2.3 Energy-Efficiency Regulations Boosting EU and North-American Demand
    • 4.2.4 Expansion of LNG Infrastructure Across Asia
    • 4.2.5 Oil and Gas Industry Dominating the Aerogel Demand
  • 4.3 Market Restraints
    • 4.3.1 High Production Cost
    • 4.3.2 Limited Availability of Raw Materials
    • 4.3.3 Competition from High-performance Polymer Foams in Buildings
  • 4.4 Value Chain Analysis
  • 4.5 Technological Outlook
  • 4.6 Porter's Five Forces
    • 4.6.1 Bargaining Power of Suppliers
    • 4.6.2 Bargaining Power of Buyers
    • 4.6.3 Threat of New Entrants
    • 4.6.4 Threat of Substitute Products and Services
    • 4.6.5 Degree of Competition

5 Market Size and Growth Forecasts (Value)

  • 5.1 By Type
    • 5.1.1 Silica
    • 5.1.2 Carbon
    • 5.1.3 Alumina
    • 5.1.4 Other Types
  • 5.2 By Form
    • 5.2.1 Blanket
    • 5.2.2 Particle
    • 5.2.3 Block
    • 5.2.4 Panel
  • 5.3 By Application
    • 5.3.1 Thermal Insulation
    • 5.3.2 Acoustic Insulation
    • 5.3.3 Catalyst and Adsorbent
    • 5.3.4 Battery and Energy Storage
    • 5.3.5 Day-lighting and Translucent Panels
    • 5.3.6 Other Applications
  • 5.4 By End-user Industry
    • 5.4.1 Oil and Gas
    • 5.4.2 Construction
    • 5.4.3 Automotive
    • 5.4.4 Marine
    • 5.4.5 Aerospace
    • 5.4.6 Other End-user Industries
  • 5.5 By Geography
    • 5.5.1 Asia-Pacific
      • 5.5.1.1 China
      • 5.5.1.2 India
      • 5.5.1.3 Japan
      • 5.5.1.4 South Korea
      • 5.5.1.5 Rest of Asia-Pacific
    • 5.5.2 North America
      • 5.5.2.1 United States
      • 5.5.2.2 Canada
      • 5.5.2.3 Mexico
    • 5.5.3 Europe
      • 5.5.3.1 Germany
      • 5.5.3.2 United Kingdom
      • 5.5.3.3 Italy
      • 5.5.3.4 France
      • 5.5.3.5 Rest of Europe
    • 5.5.4 South America
      • 5.5.4.1 Brazil
      • 5.5.4.2 Argentina
      • 5.5.4.3 Rest of South America
    • 5.5.5 Middle-East and Africa
      • 5.5.5.1 Saudi Arabia
      • 5.5.5.2 United Arab Emirates
      • 5.5.5.3 South Africa
      • 5.5.5.4 Nigeria
      • 5.5.5.5 Rest of Middle-East and Africa

6 Competitive Landscape

  • 6.1 Market Concentration
  • 6.2 Strategic Moves
  • 6.3 Market Share Analysis
  • 6.4 Company Profiles {(includes Global level Overview, Market level overview, Core Segments, Financials as available, Strategic Information, Market Rank/Share for key companies, Products and Services, and Recent Developments)}
    • 6.4.1 Acoustiblok, Inc.
    • 6.4.2 Active Aerogels
    • 6.4.3 Aerogel Technologies, LLC
    • 6.4.4 aerogel-it
    • 6.4.5 Armacell
    • 6.4.6 Aspen Aerogels, Inc.
    • 6.4.7 BASF
    • 6.4.8 Blueshift Materials Inc.
    • 6.4.9 Cabot Corporation
    • 6.4.10 ENERSENS
    • 6.4.11 Guangdong Alison Technology Co., Ltd.
    • 6.4.12 Knauf Insulation
    • 6.4.13 Nano Tech Co., Ltd.
    • 6.4.14 Ningbo Surnano Aerogel Co., Ltd
    • 6.4.15 Porex
    • 6.4.16 Sino Aerogel
    • 6.4.17 Svenska Aerogel AB
    • 6.4.18 TAASI Corporation
    • 6.4.19 Thermablok Aerogels Ltd.

7 Market Opportunities and Future Outlook

  • 7.1 White-space and Unmet-need Assessment