印度工程塑膠市場：市場佔有率分析、產業趨勢與統計、成長預測（2024-2029）

印度工程塑膠市場規模預計在 2024 年為 43.6 億美元，預計到 2029 年將達到 62.6 億美元，預測期內（2024-2029 年）的複合年成長率為 7.49%。

預測期內包裝產業將保持主導地位

• 工程塑膠的應用範圍包括航太內牆板和門以及硬質和軟質包裝。印度工程塑膠市場受到包裝、電氣電子和汽車等行業的推動。 2022 年，包裝和電氣電子將佔據最高的市場銷售佔有率，分別為 27.58% 和 21.10%。
• 包裝佔印度工程塑膠市場的最大佔有率。由於新產品發布對塑膠包裝的需求，印度包裝產業在二線城市蓬勃發展。國內外公司正在採取合資、合作等策略，這對市場成長產生了正面影響。成長的主要動力還在於樹脂的低成本和靈活性，而且樹脂對環境的碳排放也很低。印度塑膠包裝產量預計將從 2021 年的 400 萬噸增加到 2022 年的 416 萬噸，產量與前一年同期比較增 3.97%。
• 電氣和電子產業是印度成長最快的產業，2021 年對該國 GDP 的貢獻率為 3.4% 左右。印度政府已製定策略，透過針對智慧型手機、半導體、設計和 IT 軟體硬體組件的四項 PLI（生產連結獎勵計畫）計劃，推動電子產業發展，並在未來幾年內將其價值提升至 170 億美元。 2022年9月，印度電子產品出口額為20.0907億美元，較去年同期成長71.99%。預計這些因素將推動電子產業工程塑膠的成長，預計預測期內以金額為準的複合年成長率將達到 9.42%。

印度工程塑膠市場趨勢

政府監管支持在產業成長中發揮關鍵作用

• 在印度，2020-2021年電氣和電子設備銷售額成長了19.6%。電子製造業產值預計將從 2015-16 年的 371 億美元增加到 2020-21 年的 673 億美元。然而，新冠疫情相關的干擾影響了2020-2021年的成長軌跡，導致產出下降。
• 2022年9月，印度電子產品出口額為20.0907億美元，與前一年同期比較去年同期成長71.99%。行動電話、IT硬體（筆記型電腦、平板電腦）、家用電子電器（電視、音響）、工業電子產品和汽車電子產品是該領域的主要出口產品。印度電子與資訊科技部預計，到2026年，印度電子產品出口額將達1,200億美元。美國是印度電子產品出口的最大進口國，其次是阿拉伯聯合大公國，分別佔印度電子產品出口總額的18%和17%。印度行動電話出口在南亞、非洲和中東地區擁有龐大市場，這些地區是手機產品的主要進口地區。
• 為了滿足日益成長的電子產品需求，政府推出了生產連結獎勵計畫（PLI）、電子元件和半導體製造計劃（SPECS）以及改進電子製造群（EMC 2.0）等舉措，以促進該國電子產業的發展。印度電子產業規模預計將從 2020-21 年的 750 億美元增至 2025-26 年的 3,000 億美元。由於市場發展和印度業務流程外包（BPO）行業佔有率的不斷成長，印度電子行業有潛力在未來三到五年內成為印度最大的出口行業之一。

印度工程塑膠產業概況

印度工程塑膠市場相當集中，前五大公司佔據85.39%的市場。該市場的主要企業有 Chiripal Poly Film、INEOS、IVL Dhunseri Petrochem Industries Private Limited (IDPIPL)、JBF Industries Ltd、Reliance Industries Limited 等。

其他福利

• Excel 格式的市場預測 (ME) 表
• 3個月的分析師支持

目錄

第1章執行摘要和主要發現

第2章 報告要約

第3章 引言

• 研究假設和市場定義
• 研究範圍
• 調查方法

第4章 產業主要趨勢

• 最終用戶趨勢
  • 航太
  • 車
  • 建築與施工
  • 電氣和電子
  • 包裝
• 進出口趨勢
• 價格趨勢
• 回收概述
  • 聚醯胺（PA）回收趨勢
  • 聚碳酸酯（PC）回收趨勢
  • 聚對苯二甲酸乙二醇酯（PET）的回收趨勢
  • 苯乙烯共聚物（ABS、SAN）的回收趨勢
• 法律規範
  • 印度
• 價值鍊和通路分析

第5章市場區隔

• 最終用戶產業
  • 航太
  • 車
  • 建築與施工
  • 電氣和電子
  • 工業/機械
  • 包裝
  • 其他
• 樹脂類型
  • 氟樹脂
    • 依亞型
    • 乙烯-四氟乙烯（ETFE）
    • 氟化乙丙烯 (FEP)
    • 聚四氟乙烯（PTFE）
    • 聚氟乙烯（PVF）
    • 聚二氟亞乙烯（PVDF）
    • 其他子樹脂類型
  • 液晶聚合物（LCP）
  • 聚醯胺（PA）
    • 依樹脂類型分
    • 芳香聚醯胺
    • 聚醯胺（PA）6
    • 聚醯胺（PA）66
    • 聚鄰苯二甲醯胺
  • 聚丁烯對苯二甲酸酯（PBT）
  • 聚碳酸酯（PC）
  • 聚醚醚酮（PEEK）
  • 聚對苯二甲酸乙二醇酯（PET）
  • 聚醯亞胺（PI）
  • 聚甲基丙烯酸甲酯（PMMA）
  • 聚甲醛（POM）
  • 苯乙烯共聚物（ABS和SAN）

第6章競爭格局

• 關鍵策略趨勢
• 市場佔有率分析
• 商業狀況
• 公司簡介
  • Bhansali Engineering Polymers Limited
  • Chiripal Poly Film
  • DuPont
  • Ester Industries Limited
  • Gujarat Fluorochemicals Limited（GFL）
  • Gujarat State Fertilizers & Chemicals Limited（GSFC）
  • Hindustan Fluorocarbons Limited.
  • INEOS
  • IVL Dhunseri Petrochem Industries Private Limited（IDPIPL）
  • JBF Industries Ltd
  • LANXESS
  • Mitsubishi Chemical Corporation
  • Polyplex
  • Reliance Industries Limited
  • Solvay

第7章：CEO面臨的關鍵策略問題

第 8 章 附錄

• 世界概況
  • 概述
  • 五力分析框架（產業吸引力分析）
  • 全球價值鏈分析
  • 市場動態（DRO）
• 資訊來源及延伸閱讀
• 圖片列表
• 關鍵見解
• 數據包
• 詞彙表

The India Engineering Plastics Market size is estimated at 4.36 billion USD in 2024, and is expected to reach 6.26 billion USD by 2029, growing at a CAGR of 7.49% during the forecast period (2024-2029).

Packaging industry to remain dominant during the forecast period

• Engineering plastics have applications ranging from interior wall panels and doors in aerospace to rigid and flexible packaging. The engineering plastics market in India is led by industries such as packaging, electrical and electronics, and automotive. Packaging and electrical and electronics accounted for the highest market revenue shares of 27.58% and 21.10%, respectively, in 2022.
• Packaging holds the largest share of India's engineering plastics market. The packaging industry in India is flourishing in second-tier cities due to the demand for plastic packaging in launching new products. Domestic and foreign firms are adopting strategies such as joint ventures and partnerships that positively impact market growth. The growth is also primarily driven by the low cost and flexibility of the resins, which also maintain a low-carbon footprint on the environment. India's plastic packaging production had a volume of 4.16 million tons in 2022 from 4 million tons in 2021, at a Y-o-Y growth of 3.97% by volume.
• The electrical and electronics industry is India's most rapidly expanding sector, with the electronics segment contributing approximately 3.4% to the country's GDP in 2021. The government has outlined a strategy to promote the electronics industry and increase its value to USD 17 billion through four PLI (production-linked incentive) schemes for smartphones, semiconductors, design, and IT software and hardware components over the next few years. India's export of electronic goods stood at USD 2,009.07 million in September 2022, with an increase of 71.99% Y-o-Y. These factors are expected to impetus the growth of engineering plastics in the electronics industry, registering a CAGR of 9.42%, by value, over the forecast period in India.

India Engineering Plastics Market Trends

Regulatory support by the government to play key role in industry growth

• India witnessed an increase in electrical and electronics revenue by 19.6% from 2020 to 2021. The electronics manufacturing industry's production grew from a value of USD 37.1 billion in 2015-16 to USD 67.3 billion in 2020-21. However, COVID-19-related disruptions impacted the growth trajectory in 2020-21 and led to a decline in output.
• India's export of electronic goods stood at USD 2,009.07 million in September 2022, an increase of 71.99% Y-o-Y. Mobile phones, IT hardware (laptops, tablets), consumer electronics (TV and audio), industrial electronics, and auto electronics are key export products in this sector. The Ministry of Electronics & IT estimates that India's electronics industry exports are expected to reach a value of USD 120 billion by 2026. The United States is the largest importer of India's electronic exports, followed by the United Arab Emirates, accounting for 18% and 17% of the overall exports, respectively. Mobile phone exports from India find significant markets in South Asia, Africa, and the Middle East, making them key importing regions for these products.
• With the growing need for electronic goods, the government launched production-linked incentives (PLI), Manufacturing of Electronic Components and Semiconductors (SPECS), Modified Electronic Manufacturing Clusters (EMC 2.0), etc., to promote the country's electronic goods industry. The country's electronics industry is expected to reach a value of USD 300 billion by 2025-26 from USD 75 billion in 2020-21. India's electronics sector has the potential to become one of the top exporting sectors of India in the next 3-5 years due to the development and increase in the market share of the Indian business process outsourcing (BPO) industry.

India Engineering Plastics Industry Overview

The India Engineering Plastics Market is fairly consolidated, with the top five companies occupying 85.39%. The major players in this market are Chiripal Poly Film, INEOS, IVL Dhunseri Petrochem Industries Private Limited (IDPIPL), JBF Industries Ltd and Reliance Industries Limited (sorted alphabetically).

Additional Benefits:

• The market estimate (ME) sheet in Excel format
• 3 months of analyst support

TABLE OF CONTENTS

1 EXECUTIVE SUMMARY & KEY FINDINGS

2 REPORT OFFERS

3 INTRODUCTION

• 3.1 Study Assumptions & Market Definition
• 3.2 Scope of the Study
• 3.3 Research Methodology

4 KEY INDUSTRY TRENDS

• 4.1 End User Trends
  • 4.1.1 Aerospace
  • 4.1.2 Automotive
  • 4.1.3 Building and Construction
  • 4.1.4 Electrical and Electronics
  • 4.1.5 Packaging
• 4.2 Import And Export Trends
• 4.3 Price Trends
• 4.4 Recycling Overview
  • 4.4.1 Polyamide (PA) Recycling Trends
  • 4.4.2 Polycarbonate (PC) Recycling Trends
  • 4.4.3 Polyethylene Terephthalate (PET) Recycling Trends
  • 4.4.4 Styrene Copolymers (ABS and SAN) Recycling Trends
• 4.5 Regulatory Framework
  • 4.5.1 India
• 4.6 Value Chain & Distribution Channel Analysis

5 MARKET SEGMENTATION (includes market size in Value in USD and Volume, Forecasts up to 2029 and analysis of growth prospects)

• 5.1 End User Industry
  • 5.1.1 Aerospace
  • 5.1.2 Automotive
  • 5.1.3 Building and Construction
  • 5.1.4 Electrical and Electronics
  • 5.1.5 Industrial and Machinery
  • 5.1.6 Packaging
  • 5.1.7 Other End-user Industries
• 5.2 Resin Type
  • 5.2.1 Fluoropolymer
    • 5.2.1.1 By Sub Resin Type
    • 5.2.1.1.1 Ethylenetetrafluoroethylene (ETFE)
    • 5.2.1.1.2 Fluorinated Ethylene-propylene (FEP)
    • 5.2.1.1.3 Polytetrafluoroethylene (PTFE)
    • 5.2.1.1.4 Polyvinylfluoride (PVF)
    • 5.2.1.1.5 Polyvinylidene Fluoride (PVDF)
    • 5.2.1.1.6 Other Sub Resin Types
  • 5.2.2 Liquid Crystal Polymer (LCP)
  • 5.2.3 Polyamide (PA)
    • 5.2.3.1 By Sub Resin Type
    • 5.2.3.1.1 Aramid
    • 5.2.3.1.2 Polyamide (PA) 6
    • 5.2.3.1.3 Polyamide (PA) 66
    • 5.2.3.1.4 Polyphthalamide
  • 5.2.4 Polybutylene Terephthalate (PBT)
  • 5.2.5 Polycarbonate (PC)
  • 5.2.6 Polyether Ether Ketone (PEEK)
  • 5.2.7 Polyethylene Terephthalate (PET)
  • 5.2.8 Polyimide (PI)
  • 5.2.9 Polymethyl Methacrylate (PMMA)
  • 5.2.10 Polyoxymethylene (POM)
  • 5.2.11 Styrene Copolymers (ABS and SAN)

6 COMPETITIVE LANDSCAPE

• 6.1 Key Strategic Moves
• 6.2 Market Share Analysis
• 6.3 Company Landscape
• 6.4 Company Profiles (includes Global Level Overview, Market Level Overview, Core Business Segments, Financials, Headcount, Key Information, Market Rank, Market Share, Products and Services, and Analysis of Recent Developments).
  • 6.4.1 Bhansali Engineering Polymers Limited
  • 6.4.2 Chiripal Poly Film
  • 6.4.3 DuPont
  • 6.4.4 Ester Industries Limited
  • 6.4.5 Gujarat Fluorochemicals Limited (GFL)
  • 6.4.6 Gujarat State Fertilizers & Chemicals Limited (GSFC)
  • 6.4.7 Hindustan Fluorocarbons Limited.
  • 6.4.8 INEOS
  • 6.4.9 IVL Dhunseri Petrochem Industries Private Limited (IDPIPL)
  • 6.4.10 JBF Industries Ltd
  • 6.4.11 LANXESS
  • 6.4.12 Mitsubishi Chemical Corporation
  • 6.4.13 Polyplex
  • 6.4.14 Reliance Industries Limited
  • 6.4.15 Solvay

7 KEY STRATEGIC QUESTIONS FOR ENGINEERING PLASTICS CEOS

8 APPENDIX

• 8.1 Global Overview
  • 8.1.1 Overview
  • 8.1.2 Porter's Five Forces Framework (Industry Attractiveness Analysis)
  • 8.1.3 Global Value Chain Analysis
  • 8.1.4 Market Dynamics (DROs)
• 8.2 Sources & References
• 8.3 List of Tables & Figures
• 8.4 Primary Insights
• 8.5 Data Pack
• 8.6 Glossary of Terms