 |
市場調查報告書
商品編碼
1641944
聚氨酯添加劑：市場佔有率分析、行業趨勢、統計和成長預測（2025-2030 年）Polyurethane Additives - Market Share Analysis, Industry Trends & Statistics, Growth Forecasts (2025 - 2030) |
||||||
價格
※ 本網頁內容可能與最新版本有所差異。詳細情況請與我們聯繫。
簡介目錄
聚氨酯添加劑市場價值預計在 2025 年達到 37.9 億美元，預計到 2030 年將達到 46.1 億美元，預測期內（2025-2030 年）的複合年成長率將超過 4%。
新冠肺炎疫情為市場帶來了負面影響。生產和流動放緩，由於遏制措施和經濟動盪，各行各業被迫推遲生產。現在，市場正從疫情中復甦。預計2022年市場將達到疫情前的水準並持續穩定成長。
主要亮點
- 建設產業對聚氨酯的需求不斷成長預計將推動添加劑的消費。最大的應用之一是使用硬質聚氨酯泡棉作為牆壁和屋頂的隔熱材料、隔熱板以及門窗周圍的縫隙填充材。這將促進市場成長。
- 另一方面，替代添加劑可用於與 PU 添加劑相同的應用。例如，有機矽和丙烯酸添加劑都是聚氨酯泡沫的有效添加劑。
- 對更具創新性和成本效益的添加劑的需求不斷成長，預計將在未來幾年為市場提供機會。
- 預計亞太地區將佔據最大佔有率並在預測期內實現最高的成長率。
聚氨酯添加劑市場趨勢
汽車產業需求不斷成長
- 汽車產業是展示PU材料多樣化應用的最佳例子之一。幾乎所有類型的 PU 產品均用於汽車終端用戶產業。
- 軟性聚氨酯發泡體用於汽車、飛機、火車、巴士等的座椅、頭枕、扶手、暖通空調和其他內部系統。 PU塗料為汽車外部提供高光澤、耐用性、抗刮傷性和耐腐蝕性。 PU 塗層也用於擋風玻璃和窗戶嵌裝玻璃上，以增加強度並具有防霧功能。
- PU合成橡膠有助於防止輪胎穿孔，也可用於避震器等模製部件。熱塑性聚氨酯材料用於製造許多汽車零件，包括車身外部零件、後行李箱襯裡、防鎖死煞車系統、正時皮帶和燃油管路。 PU合成橡膠的獨特性能使其專門用於墊圈、 O 型環和其他密封件。
- 座椅是聚氨酯在汽車產業的最大應用。許多汽車座椅製造商正在尋求在其產品中使用生物基多元醇。然而，在全球大多數聚氨酯市場中，「綠色」聚氨酯的市場滲透才剛開始。
- 在全球整體，超過 90% 的車輛採用單組分 PU 密封劑來將擋風玻璃和後玻璃黏合在一起。汽車產業是反應射出成型(RIM) PU 零件的最大終端用戶產業。 RIM 用於汽車擋泥板、保險桿和擾流板，以最大限度地吸收衝擊力，而不會增加重量或體積。
- 根據國際汽車製造商組織（OICA）的數據，2022 年全球汽車產量約為 8,502 萬輛。這一數字比上年成長了約6%。 2022 年，中國、日本和德國將成為最大的汽車和商用車生產國，這將推動聚氨酯添加劑市場的發展。
- 然而，隨著人們對汽油和柴油汽車造成的環境污染的擔憂日益加劇，電動車產量預計將在未來五年內復甦。這可能會在預測期內刺激所研究市場的需求。
- 2023 年 8 月，總部位於密西根州的全球科技公司 Altair 和汽車研究中心 (CAR) 憑藉聚氨酯泡棉，將 Marelli 評選為 2023 年 Enlighten Awards 未來輕量化類別獎項。
- 此外，全球電動車市場正在大幅擴張，這對所研究的市場有利。例如，2022年全球電池電動車（BEV）和插電式混合動力車（PHEV）的銷量將達到約1,050萬輛，高於去年的677萬輛，成長率為55%。
- 預計所有上述因素都將在預測期內推動市場發展。
中國可望主宰亞太地區
- 在亞太地區，中國是GDP最大的經濟體。 2022年中國GDP佔世界經濟比重將達7.73%，GDP成長率與前一年同期比較3%。
- 中國是世界上最大的經濟體之一，其建築業的成長速度幾乎讓所有其他行業都相形見絀。 2022年，建築業佔中國國內生產總值比重與前一年同期比較6.9%，中國建築業增加價值年增5.5%左右。
- 中國家具製造業的快速成長，很大程度上得益於不斷成長的國內需求以及強勁的海外市場需求。
- 2022年，中國佔全球家具產量的近53%。國內需求的成長和對歐洲國家的出口導致產量進一步增加。
- 根據OICA統計，中國自2009年起已成為全球最大的汽車製造國和市場。中國每年的汽車產量佔全球總產量的32%以上，超過歐盟、美國和日本汽車產量的總和。
- 然而，預計未來幾年電動車在該國的普及將推動對聚氨酯添加劑的需求。中國政府計畫在2025年引進至少5,000輛燃料電池電動車，到2030年引進100萬輛。預計在預測期內，政府對電動、混合動力汽車和燃料電池汽車的推廣將推動市場研究。
- 由於這些因素，預計該國對聚氨酯添加劑的需求將會增加。
聚氨酯添加劑產業概況
聚氨酯添加劑市場因其性質而部分分散。主要參與者（不分先後順序）包括 Evonik Industries AG、Air Products Inc.、Covestro AG、Huntsman International LLC 和BASF SE。
其他福利：
- Excel 格式的市場預測 (ME) 表
- 3 個月的分析師支持
目錄
第 1 章 簡介
- 調查前提條件
- 研究範圍
第2章調查方法
第3章執行摘要
第4章 市場動態
- 驅動程式
- 建設產業對聚氨酯的需求不斷增加
- 汽車產業需求增加
- 永續聚氨酯產品需求不斷成長
- 限制因素
- 替代添加劑的可用性
- 嚴格的政府法規
- 產業價值鏈分析
- 波特五力分析
- 供應商的議價能力
- 買家的議價能力
- 新進入者的威脅
- 替代品的威脅
- 競爭程度
第 5 章 市場區隔（以金額為準的市場規模）
- 按類型
- 發泡
- 催化劑
- 阻燃劑
- 界面活性劑
- 其他添加劑（填料、乳化劑、交聯劑）
- 按應用
- 黏合劑和密封劑
- 被覆劑
- 軟質發泡成型
- 硬質泡沫
- 其他應用（合成橡膠、纖維、複合材料、醫療設備）
- 按地區
- 亞太地區
- 中國
- 印度
- 日本
- 韓國
- 東南亞國協
- 其他亞太地區
- 北美洲
- 美國
- 加拿大
- 墨西哥
- 歐洲
- 德國
- 英國
- 義大利
- 法國
- 其他歐洲國家
- 南美洲
- 巴西
- 阿根廷
- 南美洲其他地區
- 中東和非洲
- 沙烏地阿拉伯
- 南非
- 其他中東和非洲地區
- 亞太地區
第6章 競爭格局
- 併購、合資、合作與協議
- 市場佔有率（%）**/排名分析
- 主要企業策略
- 公司簡介
- Air Products Inc.
- Covestro AG
- BASF SE
- Dow
- GEO Specialty Chemicals Inc.
- Huntsman International LLC
- Eastman Chemical Company
- Evonik Industries AG
- Momentive Performance Materials Inc.
- KAO Corporation
- Specialty Products Inc.
- Tosoh Corporation
第7章 市場機會與未來趨勢
- 對更具創新性和成本效益的添加劑的需求不斷增加
- 其他機會
簡介目錄
Product Code: 62723
The Polyurethane Additives Market size is estimated at USD 3.79 billion in 2025, and is expected to reach USD 4.61 billion by 2030, at a CAGR of greater than 4% during the forecast period (2025-2030).
The market was negatively impacted by the COVID-19 pandemic as there was a slowdown in production and mobility wherein industries were forced to delay their production due to containment measures and economic disruptions. Currently, the market has recovered from the pandemic. The market reached pre-pandemic levels in 2022 and is expected to grow steadily in the future.
Key Highlights
- The rising demand for polyurethane in the construction industry will likely propel additives' consumption. One of the largest applications is the use of rigid PU foam as wall and roof insulation, insulated panels, and gap fillers for the space around doors and windows. Thereby augmenting the market's growth.
- On the flip side, the alternative additives can be used in some of the same applications as PU additives. For example, silicon additives and acrylic additives are both effective additives against PU foams.
- The increasing demand for more innovative and cost-effective additives is projected to act as an opportunity for the market in the future.
- The Asia-Pacific region is expected to account for the largest share and register the highest growth rate over the forecast period.
Polyurethane Additives Market Trends
Increasing Demand from the Automotive Industry
- The automotive industry provides one of the best examples of the diverse applications of PU materials. Nearly every type of PU product is used in the automotive end-user industry.
- Flexible PU foams are used in seating, headrests, armrests, HVAC, and other interior systems for automotive, like in airliners, trains, and buses. PU coatings provide a vehicle's exterior with high gloss, durability, scratch resistance, and corrosion resistance. PU coatings are also used for glazing windshields and windows, increasing strength and providing fog resistance.
- PU elastomers protect against tire punctures and are used in other molded components, such as shock absorbers. Thermoplastic PU materials are used to manufacture many automotive parts, including exterior body parts, trunk liners, anti-lock brake systems, timing belts, and fuel lines. The unique properties of PU elastomers contribute to their exclusive usage in gaskets, O-rings, and other seals.
- Seating is the largest application of PU in the automotive industry. Many automotive seating manufacturers demand products made with bio-based polyols. However, the market penetration of "green" PU is still emerging in most global PU markets.
- Globally, more than 90% of automobiles are produced with bonded windshields and rear windows using one-component PU sealants. The automotive industry is the largest end-user industry for reaction injection molding (RIM) PU parts. RIM is used to maximize the shock absorption of vehicle fenders, bumpers, and spoilers without adding weight or bulk.
- In 2022, according to the Organisation Internationale des Constructeurs d'Automobiles (OICA), around 85.02 million motor vehicles were produced worldwide. This figure translates into an increase of around 6% compared with the previous year. China, Japan, and Germany were the largest producers of cars and commercial vehicles in 2022, which is driving the PU additive market.
- However, with growing concerns about environmental pollution from petrol- and diesel-based vehicles, the production of electric vehicles is expected to pick up over the next five years. This is likely to drive the demand in the market studied over the forecast period.
- In August 2023, Global technology company Altair and the Center for Automotive Research (CAR), both based in Michigan, named Marelli as the 2023 Enlighten award winner in the Future of Lightweighting category for its polyurethane foam for interior products.
- Further, the global electric vehicle market is expanding significantly, which is benefitting the market studied. For instance, in 2022, around 10.5 million units of battery electric vehicles (BEVs) and plug-in hybrid electric vehicles (PHEVs) were sold across the globe, witnessing a growth rate of 55% compared to 6.77 million units sold in the previous year.
- All the factors above are expected to drive the market during the forecast period.
China is Expected to Dominate the Asia-Pacific Region
- In Asia-Pacific, China is the largest economy in terms of GDP. The GDP value of China represents 7.73% of the world economy in 2022 and has a 3% GDP growth compared to the previous year.
- China is one of the largest countries in the world, where the construction sector dominates almost all other sectors in growth. In 2022, the construction industry accounted for around 6.9% of China's gross domestic product, and the value added to the Chinese construction industry increased by about 5.5% compared to the previous year.
- The rapid growth of the furniture manufacturing industry in the country is majorly fueled by the increasing domestic demand, coupled with significant demand from the foreign market.
- China accounted for almost 53% of the global furniture production in 2022. The production was further increased rapidly due to the increase in domestic demand and exports to European countries.
- According to the OICA, China remains the world's largest automotive manufacturing country and automotive market since 2009. Annual vehicle production in China accounted for more than 32% of worldwide vehicle production, which exceeds that of the European Union or that of the United States and Japan combined.
- However, the popularity of electric vehicles in the country is expected to propel the demand for PU additives in the coming years. The Chinese government plans to have a minimum of 5,000 fuel-cell electric vehicles by 2025 and 1 million by 2030. The government promoting the use of electric, hybrid, and fuel-cell electric vehicles is expected to drive the market studied during the forecast period.
- Such factors are expected to increase the demand for polyurethane additives in the country.
Polyurethane Additives Industry Overview
The polyurethane additives market is partially fragmented in nature. The major players (not in any particular order) include Evonik Industries AG, Air Products Inc., Covestro AG, Huntsman International LLC, and BASF SE. among others.
Additional Benefits:
- The market estimate (ME) sheet in Excel format
- 3 months of analyst support
TABLE OF CONTENTS
1 INTRODUCTION
- 1.1 Study Assumptions
- 1.2 Scope of the Study
2 RESEARCH METHODOLOGY
3 EXECUTIVE SUMMARY
4 MARKET DYNAMICS
- 4.1 Drivers
- 4.1.1 Rising Demand for Polyurethane in the Construction Industry
- 4.1.2 Increasing Demand from the Automotive Industry
- 4.1.3 Growing demand for sustainable Polyurethane products
- 4.2 Restraints
- 4.2.1 Availability of Alternative Additives
- 4.2.2 Stringent Government Regulations
- 4.3 Industry Value Chain Analysis
- 4.4 Porter's Five Forces Analysis
- 4.4.1 Bargaining Power of Suppliers
- 4.4.2 Bargaining Power of Buyers
- 4.4.3 Threat of New Entrants
- 4.4.4 Threat of Substitute Products and Services
- 4.4.5 Degree of Competition
5 MARKET SEGMENTATION (Market Size in Value)
- 5.1 Type
- 5.1.1 Blowing Agents
- 5.1.2 Catalysts
- 5.1.3 Flame Retardants
- 5.1.4 Surfactants
- 5.1.5 Other Additives( Filler, Emulsifiers, and Crosslinking Additives)
- 5.2 Application
- 5.2.1 Adhesives and Sealants
- 5.2.2 Coatings
- 5.2.3 Flexible Molded Foams
- 5.2.4 Rigid Foams
- 5.2.5 Other Applications (Elastomers, Fibers, Composites, and Medical Devices)
- 5.3 Geography
- 5.3.1 Asia-Pacific
- 5.3.1.1 China
- 5.3.1.2 India
- 5.3.1.3 Japan
- 5.3.1.4 South Korea
- 5.3.1.5 ASEAN Countries
- 5.3.1.6 Rest of Asia-Pacific
- 5.3.2 North America
- 5.3.2.1 United States
- 5.3.2.2 Canada
- 5.3.2.3 Mexico
- 5.3.3 Europe
- 5.3.3.1 Germany
- 5.3.3.2 United Kingdom
- 5.3.3.3 Italy
- 5.3.3.4 France
- 5.3.3.5 Rest of Europe
- 5.3.4 South America
- 5.3.4.1 Brazil
- 5.3.4.2 Argentina
- 5.3.4.3 Rest of South America
- 5.3.5 Middle-East and Africa
- 5.3.5.1 Saudi Arabia
- 5.3.5.2 South Africa
- 5.3.5.3 Rest of Middle-East and Africa
- 5.3.1 Asia-Pacific
6 COMPETITIVE LANDSCAPE
- 6.1 Mergers and Acquisitions, Joint Ventures, Collaborations, and Agreements
- 6.2 Market Share (%)**/Ranking Analysis
- 6.3 Strategies Adopted by Leading Players
- 6.4 Company Profiles
- 6.4.1 Air Products Inc.
- 6.4.2 Covestro AG
- 6.4.3 BASF SE
- 6.4.4 Dow
- 6.4.5 GEO Specialty Chemicals Inc.
- 6.4.6 Huntsman International LLC
- 6.4.7 Eastman Chemical Company
- 6.4.8 Evonik Industries AG
- 6.4.9 Momentive Performance Materials Inc.
- 6.4.10 KAO Corporation
- 6.4.11 Specialty Products Inc.
- 6.4.12 Tosoh Corporation
7 MARKET OPPORTUNITIES AND FUTURE TRENDS
- 7.1 Increasing Demand for More Innovative and Cost-effective Additives
- 7.2 Other Opportunities
