首頁 > 市場調查報告書 > 材料

市場調查報告書

商品編碼

1401291

全球聚醯胺醯亞胺 (PAI) 市場 - 2023-2030

Global Polyamide-Imide (PAI) Market - 2023-2030

出版日期: 2023年12月29日 | 出版商:

DataM Intelligence | 英文 181 Pages | 商品交期: 最快1-2個工作天內

價格

※ 本網頁內容可能與最新版本有所差異。詳細情況請與我們聯繫。

簡介目錄

概述

全球聚醯胺醯亞胺（PAI）市場在2022年達到2.566億美元，預計到2030年將達到4.374億美元，在2023-2030年預測期間CAGR為6.9%。

由於該材料具有卓越的機械強度、耐化學性、熱穩定性和尺寸穩定性，聚醯胺醯亞胺 (PAI) 產業仍然蓬勃發展。推動 PAI 在重要應用中使用的基本因素是其耐高溫、強化學品和惡劣環境條件，同時保持機械完整性。

電子和電氣行業需要具有優異電絕緣性能、耐高溫性、機械強度和耐化學性的材料。中國、日本、韓國和台灣等國家以其電子製造而聞名。

因此，對PAI的需求不斷上升。由於該地區在電子設備生產中佔據主導地位，因此對用於電路板、連接器和絕緣體等電子部件的 PAI 等主要材料的需求持續成長。因此，亞太地區在全球產品市場中佔有重要的市場佔有率。

動力學

漆包線用二氧化矽/聚醯胺醯亞胺複合膜的合成與表徵

如果製造出品質較好的複合膜，漆包線可以有多種用途。這一發展可能會導致 PAI 市場的成長，這可能會鼓勵聚醯胺醯亞胺材料在各種行業的典型應用之外使用。如果二氧化矽/聚醯胺醯亞胺複合薄膜表現出比目前漆包線中使用的材料更好的質量，那麼採用這種方法的製造商可能會獲得競爭優勢。聚醯胺醯亞胺基材料在努力提高產品性能的公司中越來越受歡迎，這反過來又推動了對 PAI 的需求。

以二氧化矽/聚醯胺醯亞胺複合膜改良的漆包線有潛力推動高性能電線、絕緣材料和電氣元件市場的擴大。這種成長可能會進一步支持對聚醯胺醯亞胺材料（許多應用中的關鍵組成部分）的需求。

對特種材料的需求不斷成長

即使在非常高的溫度和壓力下，PAI 也具有出色的機械強度、耐化學性和尺寸穩定性。由於這些特殊的品質，它是汽車、航空航太、電子和工業製造等領域要求苛刻的應用的最佳選擇。由於其適應性，PAI 被用於許多重要的應用，包括工業機械、汽車和航空航太零件以及電氣元件。

由於公司正在尋找能夠在惡劣環境中生存並且仍然可靠耐用的材料，因此對 PAI 的需求仍在成長。由於其更好的品質，PAI 可以在多種應用中取代金屬、陶瓷和其他聚合物等傳統材料，這大大增加了其不斷成長的需求。由於其卓越的性能和輕量化的設計，PAI正在被越來越廣泛的行業採用。

原料供應有限

一些原料，如芳香二胺和芳香酸，是生產 PAI 所必需的。 PAI 的生產可能會立即受到這些基本材料供應中斷或短缺的影響。中斷可能會導致生產延遲或更高的成本。

價格波動可能是由於取得重要原料的限制所造成的。原料成本的變化可能會影響 PAI 的總生產成本。市場對 PAI 的需求可能會受到原物料價格突然上漲的影響，從而降低其與替代材料相比的競爭力。 PAI的總製造能力可能會受到原料稀缺的限制。如果在獲得充足的基本原料供應方面存在挑戰，製造商可能會發現很難增加產量來滿足不斷成長的需求。

成本高

與許多其他特種塑膠相比，PAI 稍微貴一些。其生產合成程序複雜且使用專用原料，導致製造費用較高。由於成本高昂，某些應用和行業可能會發現它不太可行，這限制了那些重視成本效益的人的承受能力。

由於 PAI 比以較低成本提供類似性能特徵的競爭材料更昂貴，因此 PAI 的競爭力較差。如果其他材料能夠以更低的成本提供同等質量，PAI 可能很難獲得市場佔有率。各行業不斷尋找經濟的替代品而不影響性能。 PAI 昂貴的價格可能會阻礙其進入更新的市場或應用。

Due to the material's exceptional mechanical strength, chemical resistance, thermal stability and dimensional stability, the polyamide-imide (PAI) industry is still flourishing. The fundamental factor propelling PAI's employment in important applications is its resistance to high temperatures, strong chemicals and adverse environmental conditions while maintaining mechanical integrity.

Materials with superior electrical insulating qualities, resilience to high temperatures, mechanical strength and chemical resistance are required by the electronics and electrical industries. Countries like China, Japan, South Korea and Taiwan is well known for its electronic manufacturing.

Therefore, the demand for PAI is rising continuously. Due to this region's dominance in the production of electronic devices, there is a continuous need for the primary materials like PAI for electronic parts like circuit boards, connectors and insulators. Therefore, the Asia-Pacific accounts for the significant market shares in the global product market.

Dynamics

Silica/Polyamide-Imide Composite Film Synthesis and Characterization for Enamel Wire

Enamel wire can have many uses if a composite film with better qualities is created. The market for PAI could rise as a result of this development, which might encourage the usage of polyamide-Imide materials outside of their typical applications in a variety of industries. Manufacturers employing this method may gain a competitive edge if the Silica/Polyamide-Imide composite film exhibits better qualities than the materials currently utilized in enamel wires. Polyamide-imide-based materials are an increasingly popular option among companies striving to improve the performance of their products, which in turn drives up demand for PAI.

Improved enamel wire with Silica/Polyamide-Imide composite films has the potential to propel the expansion of markets for high-performance wires, insulation materials and electrical components. The need for Polyamide-Imide materials, a crucial component in many applications, may be further supported by this increase.

Rising Demand for Specialized Materials

Even at very high temperatures and pressures, PAI has exceptional mechanical strength, chemical resistance and dimensional stability. It is the best option for demanding applications in sectors including automotive, aerospace, electronics and industrial manufacture because of these special qualities. Due to its adaptability, PAI is used in many important applications, including industrial machinery, automobile and aerospace parts and electrical components.

The demand for PAI is still growing as companies are looking for materials that can survive harsh environments and still be dependable and durable. Due to its better qualities, PAI may replace conventional materials like metals, ceramics and other polymers in several applications, which greatly adds to its rising demand. Because of its remarkable performance and lightweight design, PAI is being adopted more widely by industries.

Limited Availability of Raw Materials

Some raw ingredients, such as aromatic diamines and aromatic acids, are necessary for the manufacturing of PAI. The production of PAIs may be immediately impacted by any interruption or scarcity in the supply of these basic materials. Disruptions can result in production delays or higher costs.

Price volatility can result from restricted access to essential raw resources. Variations in the cost of raw materials can have an impact on PAI's total production costs. The demand for PAI in the market may be impacted by abrupt price rises for raw materials that reduce its competitiveness in comparison to alternative materials. The total manufacturing capacity of PAI may be limited by the scarcity of raw resources. If there are challenges to obtaining a sufficient supply of essential raw materials, manufacturers may find it difficult to increase their output to meet the rising demand.

High Cost

In comparison to many other specialty plastics, PAI is slightly more expensive. Higher manufacturing expenses result from its production's complex synthesis procedures and use of specialized raw materials. Certain applications and sectors may find it less viable due to its high cost, which limits its affordability for those that value cost-effectiveness.

Because PAI is more expensive than competing materials that provide comparable performance features at a lower cost, PAI is less competitive. Market share may be difficult for PAI to gain if other materials can offer equivalent qualities at a lower cost. Industries are constantly searching for economical alternatives without compromising performance. PAI's expensive price may prevent it from entering more recent markets or applications.

Segment Analysis

The global polyamide-imide (PAI) market is segmented based on application, end-user and region.

Versatile Molding Capabilities and Application Diversity of PAI in Key Industries

The excellent molding capabilities of PAI enable the accurate creation of complicated and detailed forms. The property is essential for several moulding processes, including injection, compression and extrusion molding. The kind of accuracy makes it possible to develop complex parts for a variety of companies.

PAI is adaptable because it can take on several shapes and forms while maintaining strong mechanical strength, heat resistance and dimensional stability. It is widely used in vital industries like electronics, aircraft, automotive and industrial production, meeting the need for high-performance materials in demanding applications.

For instance, certain requirements must be met for the processing of Torlon polyamide-imide (PAI) resins and specific injection molding machinery is needed. Since Torlon PAI is a reactive polymer, heat will cause the polymer to expand in molecular weight by branching, cross-linking and chain extension. There are particular equipment considerations and processing methods that must be followed to prevent this during injection molding along with producing high-quality components. Therefore, the molded resins segment captures the majority of the total segmental shares.

Geographical Penetration

Influence of North America's Technological Prowess and Diverse Industry Sectors

The region is renowned for its technological innovation and advanced manufacturing abilities. Companies in North America make significant R&D investments to improve material qualities and investigate novel uses for PAI, which propels market expansion.

The automotive, aerospace, electronics, oil and gas and healthcare industries-all of which have significant markets in North America are among the most significant PAI consumers. The need for high-performance materials like PAI in these fields is driving market growth. Therefore, North America is one of the prominent regions in the product market accounting for the majority of the global shares.

COVID-19 Impact Analysis

Demand for PAI fluctuated in sectors like electronics, aircraft and automobiles, which are major users of the commodity. The demand for PAI-based products and components was hampered by lower investments, halted production lines and decreased consumer spending.

The uncertainty caused by the pandemic prompted numerous initiatives in a variety of industries to be postponed or abandoned. Investments in expansions or new technology that might have fueled the PAI market's growth were shelved. Unbalances between supply and demand developed as patterns of production and consumption changed. The might have affected the PAI market's pricing and management strategies.

Russia-Ukraine War Impact Analysis

Broad economic uncertainty tends to be brought on by geopolitical tensions and conflicts and this can have an impact on investment decisions, consumer spending and industrial output. A downturn in the economy may affect the need for PAI across a range of companies.

Due to trade route disruptions brought on by the conflict, companies may have sought alternate suppliers or modes of transportation, which could have an impact on the price and accessibility of materials related to PAI. The geopolitical tensions may have had an impact on several of the PAI-consuming industries, including electronics, aircraft and automotive. The demand for products based on PAI may be indirectly impacted by any disruptions in these industries.

By Application

Molded Resins
Films
Fibers
Enamel Wire
Others

By End-User

Automotive
Aerospace and Defense
Electrical and Electronics
Oil and Gas
Others

By Region

North America
- U.S.
- Canada
- Mexico
Europe
- Germany
- UK
- France
- Italy
- Russia
- Rest of Europe
South America
- Brazil
- Argentina
- Rest of South America
Asia-Pacific
- China
- India
- Japan
- Australia
- Rest of Asia-Pacific
Middle East and Africa

Key Developments

In January 2022, Polyamide-imide Torlon (PAI) for complex industrial uses. Superior strength-to-weight ratios can be attained by highly designed plastic formulations in comparison to conventional lightweight alloys like titanium and aluminum.
In January 2022, The Electronics and industrial segment company DuPont Interconnect Solutions has declared that the expansion project at its manufacturing facility in Circleville, Ohio, has been declared complete. With this US$ 250 million investment, DuPont will be able to address the increasing demand in the automotive, consumer electronics, telecom, specialized industrial and defense sectors of the market by increasing the production of Pyralux flexible circuit materials and Kapton polyimide film.
In April 2023, Asahi Kasei and Microwave Chemical jointly started a demonstration project aimed at commercializing a microwave-based chemical recycling method for polyamide 661 (PA66, commonly known as nylon 66). It is anticipated that the process, which uses microwaves to depolymerize2 PA66, will produce the monomers adipic acid (ADA) and hexamethylenediamine (HMD) with a high yield and minimal energy usage. New PA66 can then be produced using the obtained monomers. The demonstration involves the depolymerization of PA66 manufacturing and post-use waste material used in airbags and car parts.

Competitive Landscape

The major global players in the market include Solvay S.A., SABIC, Mitsubishi Chemical Advanced Materials, Kolon Plastics, Ensinger GmbH, PolyOne Corporation, Celanese Corporation, DuPont, Polyplastics Co., Ltd. and Quadrant AG.

Why Purchase the Report?

To visualize the global polyamide-imide (PAI) market segmentation based on application, end-user and region, as well as understand key commercial assets and players.
Identify commercial opportunities by analyzing trends and co-development.
Excel data sheet with numerous data points of polyamide-imide (PAI) market-level with all segments.
PDF report consists of a comprehensive analysis after exhaustive qualitative interviews and an in-depth study.
Application mapping available as excel consisting of key products of all the major players.

The global polyamide-imide (PAI) market report would provide approximately 53 tables, 50 figures and 181 Pages.

Target Audience 2023

Manufacturers/ Buyers
Industry Investors/Investment Bankers
Research Professionals
Emerging Companies

1. Methodology and Scope

1.1. Research Methodology
1.2. Research Objective and Scope of the Report

2. Definition and Overview

3. Executive Summary

3.1. Snippet by Application
3.2. Snippet by End-User
3.3. Snippet by Region

4. Dynamics

4.1. Impacting Factors
- 4.1.1. Drivers
  - 4.1.1.1. Technological Advancements and Innovations
  - 4.1.1.2. Rising Demand for Specialized Materials
- 4.1.2. Restraints
  - 4.1.2.1. Limited Availability of Raw Materials
  - 4.1.2.2. High Cost
- 4.1.3. Opportunity
- 4.1.4. Impact Analysis

5. Industry Analysis

5.1. Porter's Five Force Analysis
5.2. Supply Chain Analysis
5.3. Pricing Analysis
5.4. Regulatory Analysis
5.5. Russia-Ukraine War Impact Analysis
5.6. DMI Opinion

6. COVID-19 Analysis

6.1. Analysis of COVID-19
- 6.1.1. Scenario Before COVID
- 6.1.2. Scenario During COVID
- 6.1.3. Scenario Post COVID
6.2. Pricing Dynamics Amid COVID-19
6.3. Demand-Supply Spectrum
6.4. Government Initiatives Related to the Market During Pandemic
6.5. Manufacturers Strategic Initiatives
6.6. Conclusion

7. By Application

7.1. Introduction
- 7.1.1. Market Size Analysis and Y-o-Y Growth Analysis (%), By Application
- 7.1.2. Market Attractiveness Index, By Application
7.2. Molded Resins*
- 7.2.1. Introduction
- 7.2.2. Market Size Analysis and Y-o-Y Growth Analysis (%)
7.3. Films
7.4. Fibers
7.5. Enamel Wire
7.6. Others

8. By End-User

8.1. Introduction
- 8.1.1. Market Size Analysis and Y-o-Y Growth Analysis (%), By End-User
- 8.1.2. Market Attractiveness Index, By End-User
8.2. Automotive*
- 8.2.1. Introduction
- 8.2.2. Market Size Analysis and Y-o-Y Growth Analysis (%)
8.3. Aerospace and Defense
8.4. Electrical and Electronics
8.5. Oil and Gas
8.6. Others

9. By Region

9.1. Introduction
- 9.1.1. Market Size Analysis and Y-o-Y Growth Analysis (%), By Region
- 9.1.2. Market Attractiveness Index, By Region
9.2. North America
- 9.2.1. Introduction
- 9.2.2. Key Region-Specific Dynamics
- 9.2.3. Market Size Analysis and Y-o-Y Growth Analysis (%), By Application
- 9.2.4. Market Size Analysis and Y-o-Y Growth Analysis (%), By End-User
- 9.2.5. Market Size Analysis and Y-o-Y Growth Analysis (%), By Country
  - 9.2.5.1. U.S.
  - 9.2.5.2. Canada
  - 9.2.5.3. Mexico
9.3. Europe
- 9.3.1. Introduction
- 9.3.2. Key Region-Specific Dynamics
- 9.3.3. Market Size Analysis and Y-o-Y Growth Analysis (%), By Application
- 9.3.4. Market Size Analysis and Y-o-Y Growth Analysis (%), By End-User
- 9.3.5. Market Size Analysis and Y-o-Y Growth Analysis (%), By Country
  - 9.3.5.1. Germany
  - 9.3.5.2. UK
  - 9.3.5.3. France
  - 9.3.5.4. Italy
  - 9.3.5.5. Russia
  - 9.3.5.6. Rest of Europe
9.4. South America
- 9.4.1. Introduction
- 9.4.2. Key Region-Specific Dynamics
- 9.4.3. Market Size Analysis and Y-o-Y Growth Analysis (%), By Application
- 9.4.4. Market Size Analysis and Y-o-Y Growth Analysis (%), By End-User
- 9.4.5. Market Size Analysis and Y-o-Y Growth Analysis (%), By Country
  - 9.4.5.1. Brazil
  - 9.4.5.2. Argentina
  - 9.4.5.3. Rest of South America
9.5. Asia-Pacific
- 9.5.1. Introduction
- 9.5.2. Key Region-Specific Dynamics
- 9.5.3. Market Size Analysis and Y-o-Y Growth Analysis (%), By Application
- 9.5.4. Market Size Analysis and Y-o-Y Growth Analysis (%), By End-User
- 9.5.5. Market Size Analysis and Y-o-Y Growth Analysis (%), By Country
  - 9.5.5.1. China
  - 9.5.5.2. India
  - 9.5.5.3. Japan
  - 9.5.5.4. Australia
  - 9.5.5.5. Rest of Asia-Pacific
9.6. Middle East and Africa
- 9.6.1. Introduction
- 9.6.2. Key Region-Specific Dynamics
- 9.6.3. Market Size Analysis and Y-o-Y Growth Analysis (%), By Application
- 9.6.4. Market Size Analysis and Y-o-Y Growth Analysis (%), By End-User

10. Competitive Landscape

10.1. Competitive Scenario
10.2. Market Positioning/Share Analysis
10.3. Mergers and Acquisitions Analysis

11. Company Profiles

11.1. Solvay S.A.*
- 11.1.1. Company Overview
- 11.1.2. Application Portfolio and Description
- 11.1.3. Financial Overview
- 11.1.4. Key Developments
11.2. SABIC
11.3. Mitsubishi Chemical Advanced Materials
11.4. Kolon Plastics
11.5. Ensinger GmbH
11.6. PolyOne Corporation
11.7. Celanese Corporation
11.8. DuPont
11.9. Polyplastics Co., Ltd.
11.10. Quadrant AG

LIST NOT EXHAUSTIVE

12. Appendix

12.1. About Us and Services
12.2. Contact Us

02-2729-4219

+886-2-2729-4219

License/價格

相關商品

聚醯胺醯亞胺市場規模、佔有率、趨勢分析報告：按應用、地區、細分市場預測，2024-2030

聚醯胺醯亞胺（PAI）全球市場規模、佔有率、產業趨勢分析報告：2023-2030年依應用、地區分類的展望與預測

FAQ

全球聚醯胺醯亞胺 (PAI) 市場 - 2023-2030

Global Polyamide-Imide (PAI) Market - 2023-2030

目錄

第 1 章：方法與範圍

第 2 章：定義與概述

第 3 章：執行摘要

第 4 章：動力學

第 5 章：產業分析

第 6 章：COVID-19 分析

第 7 章：按應用

第 8 章：最終用戶

第 9 章：按地區

第 10 章：競爭格局

第 11 章：公司簡介

第 12 章：附錄