市場調查報告書
商品編碼
1146402
全球汽車液體冷凝器市場-2022-2029Global Automotive Liquid Condenser Market - 2022-2029 |
※ 本網頁內容可能與最新版本有所差異。詳細情況請與我們聯繫。
汽車空調系統由許多部分組成。每個元素都起著一定的作用,並與其他元素相連。汽車空調系統的一個重要組成部分是液體冷凝器。使用冷凝器作為熱交換器將高壓氣體轉化為高壓液體,然後流向儲液乾燥器和膨脹閥。
冷凝器具有在冷凝過程中降低製冷劑溫度的功能。它成功地冷卻了溫暖的溫度以產生一種冷液體,該液體將通過汽車空調的開口釋放出來。此外,冷凝器將從壓縮機產生的壓縮氟利昂中吸收熱量,將其從氣體變為液體。
通常,此電容器位於散熱器前部附近。從那個位置,不可避免地會有很多污垢進入汽車並污染冷凝器。汽車空調冷凝器中的冷凝水可能會被阻塞。由於其關鍵功能,汽車冷凝器需要額外注意。目的是消除在製動或低速行駛時帶走車內熱量的冷凝器洩漏。
液體冷凝器為蒸發器提供過冷液體,在通過製冷劑系統循環油的同時去除水分,以及其他好處。此外,它還是電池熱控制的熱源。
全球汽車工業的興起以及年輕人對跑車的日益濃厚的興趣,增加了用於汽車舒適駕駛的液體冷凝器的需求。
隨著全球汽車工業的興起和年輕人對跑車的興趣日益濃厚,實現舒適駕駛的汽車對液體冷凝器的需求不斷增加。
近幾十年來,世界經歷了巨大的經濟增長。這種增長在中國、印度和亞太地區等新興市場更為明顯。多年的持續經濟增長導致了快速的城市化和工業化。結果,一個龐大的中產階級出現了,取得了良好的社會經濟成果。
中產階級可支配收入增加,對汽車等消費品的需求增加。隨著自動化的引入,製造商能夠以顯著降低的價格提高產量。自動化質量控制和最少的人工干預確保了整個生產過程的高質量。汽車製造商已提高產量以滿足中產階級日益增長的需求。每家公司都推出了新的型號和功能,提供有吸引力的產品以獲得市場份額。
由於汽車行業的需求增加和產量增加,液體電容器市場在預測期內有機會增長。隨著二手車壽命的延長,汽車液體冷凝器的售後市場銷售也有望增加,尤其是在北美市場。車用液體冷凝器製造商的目標是向世界供應高品質的產品。它還進行了大量的研究和開發,以滿足消費者的需求並創造市場增長前景。
汽車電容器的高成本阻礙了市場增長
汽車液體冷凝器的維護成本相對較高,需要定期維護(每 6 個月檢查和更換一次冷卻水或製冷劑)。例如,汽車空調的液體冷凝器更換成本約為679美元,而美國汽車空調冷凝器的平均更換價格為585-773美元~900美元。
此外,如果冷凝器出現故障,汽車將難以實現理想的冷卻或加熱。更換冷卻水或製冷劑會導致汽車冷凝器的維護成本很高。
汽車液體冷凝器的製造和安裝成本因應用而異。汽車液體冷凝器比傳統冷凝器更昂貴,因為由於製造成本高,它們可能需要額外的設備和高強度材料。因此,全球汽車電容器市場受到所有這些因素的負面影響。
COVID-19 影響分析
由於 COVID-19 的影響,2020 年全球汽車液體冷凝器市場暴跌。 2020 年 4 月上旬,世界各國政府實施了嚴格的封鎖和其他限制措施,以遏制 COVID-19 的傳播。汽車製造廠被迫關閉或大幅減少運營以遵守政府指令。
在 2020 年 9 月和 2020 年 10 月部分取消嚴格限制後,停工阻礙了繼續生產,並為企業造成了代價高昂的停滯。與疫情前水平相比,生產繼續放緩。
汽車製造商的需求暴跌對全球汽車液體電容器市場造成了嚴重破壞。新技術研發和新產品引進滯後。作為全球最大的汽車市場,中國在 2020 年 5 月相對較早地解除了封鎖,因此全球需求在 2020 年底略有回升。然而,隨著 2022 年初北美和歐洲爆發第二波疫情,全球需求依然疲軟。到 2022 年底,全球需求預計將達到大流行前的水平。
製造業務和研發活動的減少和部分暫停嚴重影響了汽車液體電容器製造商在 2020 年第二和第三季度的收益。然而,隨著封鎖最終解除,產量在 2022 年上升到疫情前的水平,也有一線希望。
全球汽車液體冷凝器市場按類型、材料、車輛、銷售渠道和地區進行細分。
高效的熱交換器和大表面積提高了平行流汽車液體冷凝器的市場份額
全球汽車液體冷凝器市場細分為管翅式、單流、蛇形和平行流。在提到的汽車液體冷凝器類型中,平行流汽車液體冷凝器最近得到了普及。平行流冷凝器將裝置分成多個部分或“通道”,以創建更有效的程序,將製冷劑從氣體變為液體。這是一種非常有效的熱交換器。
冷媒更換是通過定期將插頭插入側軌末端,迫使冷媒翻轉 180 度來完成的。塞子越多,轉動冷卻液的頻率就越高。製冷劑通常“通過”冷凝器 3-4 次。
另外,與傳統冷凝器不同,平行流冷凝器由緊密擠在一起的小管組成,增加了冷凝器的表面積並提高了其冷卻能力。
不斷增長的汽車行業和政府支持政策刺激亞太地區的產品需求
預計亞太地區將在預測期內引領汽車液體電容器市場。中國和印度是市場擴張的主要動力。中國和印度是市場擴張的主要動力。該地區約佔全球汽車產量的 60%,是全球人口比例最高的地區,在中國和印度兩個人口稠密國家的推動下,預計將成為全球最大的汽車需求地區。
此外,政府法規和汽車行業的發展是推動該地區電容器增長的主要因素。此外,東盟國家較低的勞動力成本和經濟生產條件也是當前增長的因素之一。
例如,印度政府已承諾在促進電動汽車的需求和接受度、鼓勵聯合研發工作以及促進必要基礎設施建設方面發揮關鍵作用。此外,亞太地區的主要汽車製造商也是推動該產品市場的因素之一。該類別的主要參與者包括 Tata Motors Limited、Pranav Vikas、ESTRA 等。
汽車液體冷凝器的全球市場與主要的區域和全球參與者競爭激烈。為市場增長做出貢獻的主要公司有電裝、馬勒熊、三電、摩丁、德爾福、塔塔汽車有限公司、Coyolado、Chaoli Hitech、Keihin Prana Bubicas 等。
領導者正在採取多種增長戰略,例如產品發布、收購和合作夥伴關係,為全球汽車液體冷凝器市場的增長做出了貢獻。
母馬
概述 馬勒已成長為汽車行業的國際開發合作夥伴和供應商,並且是未來移動出行的先驅。集團的產品組合解決了與內燃機、電動汽車動力系統和空調技術相關的所有重要挑戰。集團的營業額約為 17 億歐元,在全球 30 多個國家擁有 79,000 多名員工和 160 個生產基地。
產品組合 冷卻模塊 我們的冷卻模塊由多個發動機冷卻組件和構成空調迴路一部分的冷凝器組成。所有部件都完美匹配以獲得最佳性能。車輛設計理念將模塊組合在一起,從而降低了開發、生產和物流成本。
全球汽車液體冷凝器市場報告提供大約 69 個市場數據表、63 個數字和 205 頁的結構。
2022 年目標受眾
Automotive Liquid Condenser Market reached US$ XX million in 2021 and is expected to record significant growth by reaching up to US$ XX million by 2029, growing at a CAGR of YY% during the forecast period (2022-2029).
Numerous parts make up an automobile's air conditioning system. Each element plays a certain role and is connected to the others. The liquid condenser is crucial to a car's air conditioning system. High-pressure gas is changed into a high-pressure liquid using the condenser as a heat exchanger before streaming to the receiver dryer and, finally, the expansion valve.
The condenser acts to lower the refrigerant's temperature when condensation is taking place. A cool liquid will be produced after the warm temperature is successfully cooled and released through the car air conditioner openings. Furthermore, the condenser will absorb heat from the compressed freon the compressor produces, turning it from a gas to a liquid.
Typically, this condenser is found near the radiator's front. The position makes it inevitable that much dirt will enter the vehicle and contaminate the condenser. Condensation can be hampered by dirt in the car air conditioner condenser. The automobile condenser does require additional care, given its crucial function. The goal is to eliminate any chance of condenser leakage, which would reduce cabin heat when braking or traveling at low speeds.
The liquid condenser offers various advantages, such as giving the evaporator liquid that has been subcooled and permitting oil to circulate in the refrigerant system while removing moisture. Furthermore, it also provides a heat source for the thermal control of the battery.
The rising automotive industry across the globe, coupled with the growing preference of the young population towards sports cars, boots the demand for automotive liquid condensers for better driving comfort.
The rising automotive industry across the globe, coupled with the growing preference of the young population towards sports cars, boots the demand for automotive liquid condensers for better driving comfort
The world has experienced significant economic growth in the last couple of decades. The growth is more pronounced in emerging markets such as China, India and the wider Asia-Pacific. Years of sustained economic growth have led to rapid urbanization and industrialization. It has created positive socio-economic outcomes that have led to the emergence of a large middle class.
The rising disposable incomes of the middle class have increased the demand for consumer products such as cars. The adoption of automation has allowed manufacturing industries to increase output while keeping prices low substantially. Automated quality control and minimal human intervention ensure high quality throughout production. In order to cater to the growing demand from the middle class, automotive manufacturers have ramped up production. Companies have introduced new models and features to create attractive offerings to capture market share.
The growing demand and rising automotive industry production have created opportunities for the liquid condensers market to grow in the forecast period. In addition, sales of automotive liquid condensers in the aftermarket are anticipated to increase, particularly in the North American market, as the used car lifespan increases. Worldwide distribution of high-quality automotive liquid condensers is a goal for manufacturers. In order to meet consumer needs, they also carry out considerable research and development efforts to create growth prospects for the market to grow.
The high cost of automotive condensers hurdles the market growth for the product
Automotive liquid condensers have a relatively high maintenance cost and require routine maintenance (every six months, the coolant or refrigerant must be inspected and replaced). For instance, Car A/C liquid condenser replacement cost about US$679, with average auto AC condenser replacement prices ranging from US$585 to $773 in U.S. In addition, the total price for the average car AC condenser cost is around US$400 to US$900, with the parts costing between US$500-US$700 and the labor ranging between US$200 to US$400.
Furthermore, faulty condensers make it difficult for an automobile to achieve the ideal level of cooling or heating. The replacement of coolants and refrigerants is the cause of the high maintenance costs of vehicle condensers.
An automotive liquid condenser's fabrication and installation costs vary depending on the application. Due to the higher manufacturing costs, automotive liquid condensers are more expensive than conventional ones since they may need additional equipment and high-strength materials. Thus, the automotive condenser market worldwide is negatively impacted by all these causes.
COVID-19 Impact Analysis
The global automotive liquid condenser market experienced sharp declines in 2020 owing to COVID-19's impact. Governments across the globe imposed strict lockdowns and other restrictions in early April 2020 to curb the spread of COVID-19. The automotive manufacturing facilities had to close or scale back operations significantly to comply with the government directives.
The lockdown hampered ongoing production and created a backlog that burdened companies when the strict restrictions were partially lifted in September and October 2020. Production continued at a slower pace when compared to pre-pandemic levels.
The collapse in demand from vehicle manufacturers caused a severe disruption in the global automotive liquid condenser market. The research and development of new technologies and the introduction of new products were delayed. China, the largest automotive market globally, emerged from lockdowns relatively early by May 2020 and global demand, therefore, showed a slight recovery by the end of 2020. However, the second pandemic wave hit North America and Europe in early 2022 and global demand remains subdued. Global demand is expected to reach pre-pandemic levels by the end of 2022.
The scaling back and a partial shutdown of manufacturing operations and research and developmental activities severely affected the revenues of automotive liquid condenser manufacturing companies in the second and third quarters of 2020. However, the eventual lifting of lockdowns and increasing production toward pre-pandemic levels showed encouraging signs in 2022.
The global automotive liquid condenser market is segmented by type, material, vehicle, sales channel and region.
Effective heat exchanger and larger surface area boosts the market share for parallel-flow automotive liquid condenser
The global automotive liquid condenser market is segmented into tubes & fins, single flow, serpentines and parallel flow. Out of the mentioned automotive liquid condenser type, parallel flow automotive liquid condenser has recently gained popularity. The parallel flow condenser divides the unit into parts or "passes," creating a more effective procedure for changing the refrigerant from gas to liquid. It is a very effective heat exchanger.
The exchange is accomplished by forcing the refrigerant to reverse directions by 180° at the end of the side rails by inserting a plug within the rail at regular intervals. The refrigerant will shift direction more frequently the more plugs there are. The refrigerant typically "passes" through the condenser three to four times.
Furthermore, In contrast to conventional condensers, parallel flow condensers have a row of tiny tubes arranged closely together and have an interior diameter of roughly the size of a pin head, increasing the condenser's surface area and boosting its cooling capacity.
The growing automotive industry and supportive government policies escalate the product demand in Asia-Pacific
Asia-Pacific is expected to lead the automotive liquid condenser market in the forecast period. China and India are mostly responsible for the market expansion. China and India are mostly responsible for the market expansion. With around 60% of the world's vehicles, the region's automobile demand will be the largest globally, owing to the world's highest population proportion and two densely populated nations, China and India.
Moreover, favorable government regulations and the escalating automotive industry are major factors driving this region's condenser' growth aftermarket. In addition, low labor costs and economic production conditions in ASEAN countries are also among a few reasons behind the aftermarket's current growth.
For instance, The Indian government has committed to play a key role in promoting EV demand and acceptance, encouraging collaborative R&D efforts and facilitating the construction of necessary infrastructure. Furthermore, key regional autotmotive players are another market driving factor for the product in Asia-Pacific. The key players under the category include Tata Motors Limited, Pranav Vikas, ESTRA and others.
The global automotive liquid condenser market is highly competitive with local and global key players. Key players contributing to the market's growth are Denso, Mahle-Behr, Sanden, Modine, Delphi, Tata Motors Limited, Koyorad, Chaoli Hi-Tech and Keihin Pranav Vikas, among others.
The major companies are adopting several growth strategies, such as product launches, acquisitions and collaborations, contributing to the global growth of the automotive liquid condenser market.
MAHLE
Overview: MAHLE is a growing international development partner and supplier to the automotive industry and a pioneer for future mobility. The group's product portfolio addresses all the crucial issues relating to the powertrain and air conditioning technology for drives with combustion engines and e-mobility. The group generated approximately EUR 1.7 billion in sales with more than 79,000 employees and is represented in over 30 countries with 160 production locations globally.
Product Portfolio: Cooling modules: Cooling modules offered by the company comprises multiple engine cooling components and the condenser, which forms part of the air conditioning circuit. All parts are perfectly matched for optimum performance. The modules are put together by the vehicle design concept, which lowers the costs of development, production and logistics.
The global automotive liquid condenser market report would provide approximately 69 market data tables,63 figures and 205 pages.
Target Audience 2022
LIST NOT EXHAUSTIVE